Case industrial tractors

J.I. Case 380B Construction King

The J.I. Case 380B Construction King is an industrial tractor produced from 1985 to 1991. It features a 2.9L 3-cylinder liquid-cooled diesel engine delivering 50 hp net and 53 hp gross. The tractor has an 8-speed partially synchronized transmission with 8 forward and 4 reverse gears. It is equipped with two-wheel drive, power steering, hydraulic wet disc brakes, and a two-post ROPS. The hydraulic system is open center with a capacity of 36 gallons and a pressure of 2500 psi. The tractor has a rear independent PTO with 540 rpm at 1934 engine RPM. Dimensions include a 79-inch wheelbase, 142-inch length, and 76-inch width. It weighs 5250 lbs shipping weight and has a fuel capacity of 20 gallons. Tires are 7.50x16 front and 14.9x24 rear. The 380B was available in variants including a low center of gravity model and a farm tractor model (485).
Power-
Founded-
Model380B

Technical Specifications

Detailed specifications and technical data for J.I. Case 380B Construction King

Power
Engine (net)50 hp (37.3 kW)
PTO (claimed)42.4 hp (31.6 kW)
Engine (gross)53 hp (39.5 kW)
Drawbar (claimed)38.1 hp (28.4 kW)
Engine
Typediesel
ModelJ.I. Case D-179
Torque139 lb-ft (188.5 Nm)
Coolingliquid-cooled
Starterelectric
Cylinders3-cylinder
Rated RPM2200
Torque RPM1600
Air cleanerdual dry element
Bore/Stroke3.88x5.06 inches (99 x 129 mm)
Compression16:1
Power (net)50 hp (37.3 kW)
Pre-heatingether injection
Displacement179 ci (2.9 L)
Oil capacity6.9 qts (6.5 L)
Power (gross)53 hp (39.5 kW)
Starter volts12
Coolant capacity12 qts (11.4 L)
Height
ROPS92 inches (233 cm)
Exhaust101 inches (256 cm)
Steering wheel59.6 inches (151 cm)
Weight
Shipping5250 lbs (2381 kg)
Max rear axle9259 lbs (4199 kg)
Max front axle6172 lbs (2799 kg)
Capacity
Fuel20 gal (75.7 L)
Hydraulic system36 gal (136.3 L)
Variants
485farm tractor
380Bgeneral-purpose
380B LCGlow center of gravity
Electrical
Groundnegative
Battery CCA605
Battery volts12
Charging amps45
Charging systemalternator
Hydraulics
Typeopen center
Capacity36 gal (136.3 L)
Pressure2500 psi (172.4 bar)
SCV flow12 gpm (45.4 lpm)
Total flow15.4 gpm (58.3 lpm)
Steering flow2.5 gpm (9.5 lpm)
Mechanical
ROPSTwo-post ROPS
DriveTwo-wheel drive
BrakesHydraulic wet disc brakes
SteeringPower steering
Production
TypeIndustrial tractor
ManufacturerJ.I. Case
Years produced1985 - 1991
Transmission
Typepartially synchronized
Gears8 forward and 4 reverse
Clutch279mm dry disc
DetailsFour synchronized gears (1-4) in two ranges (low/high) plus reverse (R) range.
Oil capacity36 qts (34.1 L)
Tractor hitch
Controlposition and draft control
Rear TypeII/I
Rear lift (at ends)3100 lbs (1406 kg)
Rear lift (at 24"/610mm)2700 lbs (1224 kg)
Dimensions & Tires
Width76 inches (193 cm)
Length142 inches (360 cm)
Rear tire14.9x24
Wheelbase79 inches (200 cm)
Front tire7.50x16
Rear tread60 to 65 inches (152 to 165 cm)
Front tread52 to 80 inches (132 to 203 cm)
Ground clearance12.9 inches (32 cm)
Power Take-off (PTO)
Rear PTOindependent
Engine RPM540@1934
Rear PTO Type540 (1.375)