Case industrial tractors

J.I. Case 420B

The J.I. Case 420B is an industrial tractor produced from 1958 to 1959 by J.I. Case. It features a 2.4L 4-cylinder gasoline engine producing 47 hp gross, paired with an 8-speed torque converter transmission. The tractor is two-wheel drive with power steering and disc brakes, and has an open operator station. It supports front-end loader and backhoe attachments, with detailed loader and backhoe specifications. The 420B has a wheelbase of 75.25 inches and weighs between 2918 lbs (tractor only) and 7740 lbs (with loader backhoe).
Power-
Founded-
Model420B

Technical Specifications

Detailed specifications and technical data for J.I. Case 420B

Power
Engine (gross)47 hp (35.0 kW)
Drawbar (claimed)33 hp (24.6 kW)
Tires
Industrial rear13-24
Industrial front7.50-16
Engine
Typegasoline, 4-cylinder, liquid-cooled
ModelJ.I. Case G-148
Starterelectric
Idle RPM500-2125
Point gap0.020 inches (0.508 mm)
Rated RPM2100
SparkplugChampion D16
Air cleaneroil bath
Bore/Stroke3.375x4.125 inches (86 x 105 mm)
Compression7.1:1
Fuel systemcarburetor
Displacement148 ci (2.4 L)
Firing order1-3-4-2
Oil capacity5 qts (4.7 L)
Power (gross)47 hp (35.0 kW)
Sparkplug gap0.025 inches (0.635 mm)
Starter volts12
Coolant capacity13 qts (12.3 L)
Intake valve clearance0.014 inches (cold) (0.356 mm)
Exhaust valve clearance0.014 inches (cold) (0.356 mm)
Weight
Tractor2918 lbs (1323 kg)
Loader backhoe7740 lbs (3510 kg)
Loader tractor5570 lbs (2526 kg)
Capacity
Fuel13.7 gal (51.9 L)
Steering1 qts (0.9 L)
Hydraulic system18 gal (loader backhoe) (68.1 L)
Variants
320gear
420torque converter
Dimensions
Width78 inches (198 cm)
Length126.5 inches (tractor) (321 cm), 248 inches (loader backhoe) (629 cm)
Wheelbase75.25 inches (191 cm)
Rear tread64 inches (162 cm)
Front tread47.5 inches (120 cm)
Ground clearance10.75 inches (27 cm)
Electrical
Groundpositive
Battery AH50
Battery volts12
Charging systemgenerator
Hydraulics
Typeopen center
Capacity18 gal (loader backhoe) (68.1 L)
Pump flow21 gpm (79.5 lpm)
Steering capacity1 qts (0.9 L)
Mechanical
DriveTwo-wheel drive
BrakesDisc brakes
SteeringPower steering
Operator stationOpen operator station
Production
TypeIndustrial tractor
Years made1958 - 1959
ManufacturerJ.I. Case
Attachments
Loader
Boom rod1.5 inches (3 cm)
Dump time2.2s
Bucket rod1.25 inches (3 cm)
Dump angle45°
Lower time3.3s
Raise time4.7s
Bucket width63.4 inches (161 cm), 79.4 inches (201 cm)
Boom cylinder3.0 inches (7 cm)
Lift capacity2000 lbs (907 kg) full at pin
Breakout force4600 lbs (2086 kg)
Reach (dumped)17.5 inches (44 cm)
Bucket cylinder2.5 inches (6 cm)
Height (at pin)136 inches (345 cm)
Clearance (dumped)108 inches (274 cm)
Rollback (ground line)25°
Backhoe
TypeJ.I. Case Backhoe
Swing Arc180°
Digging depth150 inches (381 cm)
Loading height127 inches (322 cm)
Reach from pivot194 inches (492 cm)
Transport height139 inches (353 cm)
OverviewFront-end loader, Backhoe
Belt Pulley
RPM1180
Speed3060 ft/min (932.69 meters/min)
Width6 inches (15 cm)
Diameter10.25 inches (26 cm)
Transmission
Typetorque convertor
Gears8 forward and reverse
NotesFour gears in two ranges.
Oil typeSAE 90 EP
Oil capacity13 qts (12.3 L)
Tractor hitch
TypeCase Eagle Hitch
Power Take-off (PTO)
Rear PTOindependent (Optional)
Engine RPM541@1970
Rear PTO Type540 (1.375)