Tractorpedia.com

J.I. Case 430CK Construction King

The J.I. Case 430CK Construction King is an industrial tractor produced from 1960 to 1966 by J.I. Case. It features gasoline and diesel 4-cylinder engines with gross power up to 42 hp. The tractor offers a 12-speed transmission with mechanical shuttle, power steering, and mechanical disc brakes. It supports attachments such as front-end loaders and backhoes with detailed specifications. The 430CK is designed for industrial applications with two-wheel drive and an open operator station.
J.I. Case 430CKConstruction Kingindustrial tractorengine specstransmissiondimensionshydraulicsPTOattachments
Power-
Founded-
Model430CK

Technical Specifications

Detailed specifications and technical data for J.I. Case 430CK Construction King

Power

Engine (gross):42 hp (31.3 kW)

Tires

Industrial rear:14.9-24, 13.6-24, 16.9-24
Industrial front:7.50-16, 6.50-16

Engine

Type:4-cylinder 8-valve liquid-cooled diesel
Torque:133 lb-ft (180.3 Nm)
Idle RPM:600-1925
Fuel tank:22 gal (83.3 L)
Point gap:0.020 inches (0.508 mm)
Rated RPM:1750
Sparkplug:Champion D16, Autolite BT3
Engine Oil:-
Torque RPM:1250
Air cleaner:oil bath
Bore/Stroke:3.8125x4.125 inches (97 x 105 mm)
Compression:17.5:1
Fuel system:1-inch carburetor
Displacement:188 ci (3.1 L)
Firing order:1-3-4-2
Oil capacity:5 qts (4.7 L)
Power (gross):42 hp (31.3 kW)
Sparkplug gap:0.025 inches (0.635 mm)
Starter volts:12
Engine options:J.I. Case 2.4L 4-cyl gasoline, J.I. Case 3.1L 4-cyl diesel
Coolant capacity:16.5 qts (15.6 L)
Oil change interval:120 h
Intake valve clearance:0.014 inches (Cold) (0.356 mm)
Exhaust valve clearance:0.014 inches (Cold) (0.356 mm)
J.I. Case G-188D diesel:-
J.I. Case G-148B gasoline:-

Features

Drive:Two-wheel drive
Brakes:Mechanical disc brakes
Steering:Power steering
Operator station:Open operator station

Dimensions

Width:76.8 inches (195 cm)
Weight:3435 to 3625 pounds
Gas Length:116.9 inches (296 cm)
Rear tread:62 inches (157 cm), 52 to 64 inches (132 to 162 cm)
Front tread:54 inches (137 cm)
Gas Shipping:3435 lbs (1558 kg)
Diesel Length:118.1 inches (299 cm)
Gas Wheelbase:77.1875 inches (196 cm)
Max front axle:7000 lbs (dynamic) (3175 kg)
Diesel Shipping:3625 lbs (1644 kg)
Diesel Wheelbase:78.4375 inches (199 cm)
Clearance (front axle):15.5 inches (39 cm)
Height (steering wheel):59.25 inches (150 cm)

Electrical

Ground:negative
Charging system:generator

Hydraulics

Type:open center
Pump flow:13.5 gpm (loader) (51.1 lpm), 16.5 gpm (backhoe) (62.5 lpm)

Production

Type:Industrial tractor
Manufacturer:J.I. Case
Years produced:1960 - 1966

References

1:Case Utility Model 430 published in 1962, by J.I. Case
2:430 Construction King Operator's Manual (9-1481)
3:Industrial Tractors and Equipment published in 1965, by J.I. Case
4:1965 Buyers Guide published by J.I. Case

Attachments

Backhoe

Type:J.I. Case Backhoe
Weight:2680 lbs (1215 kg)
Swing Arc:180°
Bucket force:7078 lbs (3210 kg)
Digging depth:120 inches (304 cm)
Loading height:135 inches (342 cm)
Reach from pivot:186 inches (472 cm)
Transport height:140.5 inches (356 cm)
2-Foot flat digging depth:115 inches (292 cm)

Loader 1

Weight:1715 lbs (777 kg)
Dump time:1.0s
Dump angle:45°
Lower time:2.5s
Raise time:5s
Bucket width:63.375 inches (160 cm)
Breakout force:3500 lbs (1587 kg)
Reach (dumped):29 inches (73 cm)
Reach (ground):74 inches (187 cm)
Clearance (dumped):104 inches (264 cm)
Lift capacity (full at pin):2000 lbs (907 kg)

Loader 2

Dump time:1.6s
Dump angle:55°
Lower time:1.5s
Raise time:3.8s
Bucket width:79.375 inches (201 cm)
Breakout force:3600 lbs (1632 kg)
Reach (dumped):33 inches (83 cm)
Lift capacity (full at pin):1500 lbs (680 kg)

Transmission

Type:mechanical shuttle
Gears:12 forward and 3 reverse
Clutch:11-inch dry disc
Oil capacity:17 qts (16.1 L)
Transmission options:12-speed, 4-speed mechanical shuttle

Serial Numbers

Location:Serial number plate on the right side of the instrument panel.

Power Take-off (PTO)

Rear PTO:transmission
Engine RPM:533@1750
Rear PTO Type:540 (1.375)
Rear PTO live:optional