Case industrial tractors
J.I. Case 480LL
The J.I. Case 480LL is an industrial tractor produced from 1980 onwards. It features a 3.1L 4-cylinder diesel engine delivering 52 hp gross and 47 hp net power. The tractor has a 4-speed power shuttle transmission with hydraulic clutch and power steering. It is equipped with hydraulic brakes and a four-post ROPS/FOPS for operator safety. The hydraulic system is open center with a capacity of 10.8 gallons and a pressure of 2200 psi. The tractor has a rear I-type hitch and a 540 rpm rear PTO. Dimensions include an 80-inch wheelbase, 118-inch length (tractor only), and 80-inch width. It weighs 6670 lbs shipping weight. The 480LL supports various industrial tires and has a loader attachment with a 3000 lbs lift capacity and 5700 lbs breakout force.
Power-
Founded-
Model480LL
Technical Specifications
Detailed specifications and technical data for J.I. Case 480LL
Power
| Engine (net) | 47 hp (35.0 kW) |
|---|---|
| Engine (gross) | 52 hp (38.8 kW) |
Engine
| Type | diesel, 4-cylinder, liquid-cooled |
|---|---|
| Model | J.I. Case G188D |
| Torque | 138 lb-ft (187.1 Nm) |
| Starter | electric |
| Rated RPM | 2100 |
| Torque RPM | 1400 |
| Air cleaner | dry |
| Bore/Stroke | 3.812x4.125 inches (97 x 105 mm) |
| Compression | 17.5:1 |
| Power (net) | 47 hp (35.0 kW) |
| Displacement | 188 ci (3.1 L) |
| Oil capacity | 7 qts (6.6 L) |
| Power (gross) | 52 hp (38.8 kW) |
| Starter volts | 12 |
| Coolant capacity | 15 qts (14.2 L) |
Height
| ROPS | 96 inches (243 cm) |
|---|---|
| Exhaust | 105 inches (266 cm) |
| Steering wheel | 68.9 inches (175 cm) |
Weight
| Shipping | 6670 lbs (3025 kg) |
|---|---|
| Max rear axle | 54000 lbs (dynamic) (24494 kg), 13500 lbs (static) (6123 kg) |
| Max front axle | 36000 lbs (dynamic) (16329 kg), 9000 lbs (static) (4082 kg) |
Capacity
| Fuel | 23.5 gal (88.9 L) |
|---|---|
| Hydraulic system | 10.8 gal (40.9 L) |
Electrical
| Ground | negative |
|---|---|
| Battery CCA | 575 |
| Battery volts | 12 |
| Charging amps | 39 |
| Charging system | alternator |
Hydraulics
| Type | open center |
|---|---|
| Capacity | 10.8 gal (40.9 L) |
| Pressure | 2200 psi (151.7 bar) |
| Pump flow | 23.9 gpm (90.5 lpm) |
| Steering flow | 6.4 gpm (24.2 lpm) |
Mechanical
| Drive | Two-wheel drive |
|---|---|
| Brakes | Hydraulic brakes |
| Steering | Power steering |
| ROPS/FOPS | Four-post ROPS/FOPS |
Production
| Type | Industrial tractor |
|---|---|
| Years produced | 1980 - ???? |
Attachments
| Loader | Dump time3.0s Dump angle43° Lower time1.9s Raise time3.7s Bucket width74 inches (187 cm) Lift capacity3000 lbs lift (full at pin) (1360 kg) Breakout force5700 lbs breakout (2585 kg) Reach (dumped)27 inches (68 cm) Height (at pin)127.5 inches (323 cm) Clearance (dumped)102.5 inches (260 cm) Rollback (ground line)33° |
|---|
Transmission
| Type | power shuttle |
|---|---|
| Gears | 4 forward and reverse |
| Clutch | hydraulic |
| Description | Power shuttle transmission with torque converter. Synchronized up-shifts from gears 2-3 and 3-4. Synchronized down-shift from gears 4-3. |
Tractor hitch
| Rear Type | I |
|---|
Dimensions & Tires
| Width | 80 inches (203 cm) |
|---|---|
| Length | 118 inches (299 cm) Tractor only, 194.2 inches (493 cm) Tractor with loader and bucket |
| Rear tire | 14.9x24, 16.9x24, 17.5Lx24 |
| Wheelbase | 80 inches (203 cm) |
| Front tire | 7.50x16, 8.00x16, 11Lx16 |
| Rear tread | 60.2 to 66.2 inches (152 to 168 cm) |
| Front tread | 59.1 to 62.2 inches (150 to 157 cm) |
| Ground clearance | 12.6 inches (32 cm) |
Power Take-off (PTO)
| Rear PTO Type | 540 (1.375) |
|---|
More Case industrial tractors models
View all Case industrial tractors modelsJ.I. Case 1150Model1150
J.I. Case 1150 LoaderModel1150 Loader
J.I. Case 1150BModel1150B
J.I. Case 1150B LoaderModel1150B Loader
J.I. Case 1150CModel1150C
J.I. Case 1150C LoaderModel1150C Loader
J.I. Case 1150DModel1150D
J.I. Case 1150EModel1150E
J.I. Case 1150GModel1150G
J.I. Case 1150HModel1150H
J.I. Case 1150KModel1150K
J.I. Case 1150LModel1150L