Tractorpedia.com

J.I. Case 644

The J.I. Case 644 is an industrial tractor produced from 1972 to 1979 as part of the 600 Series. It features a Kohler K321 0.5L 1-cylinder air-cooled gasoline engine producing 14 hp (10.4 kW). The tractor uses a Hy-Drive hydraulic transmission with infinite forward and reverse speeds in two ranges. It has two-wheel drive, manual steering, and mechanical band brakes with an open operator station. The fuel capacity is 5 gallons (18.9 L) and the hydraulic system holds 3 gallons (11.4 L) with an open center type hydraulic system operating at 2300 psi. Dimensions include a 48 inch (121 cm) wheelbase, 108 inch length with loader, 41 inch width at rear wheels, and a weight of 1130 lbs (512 kg). Tires are 5.70-8 front and 27x8.50-15 rear. Electrical system is 12 volts with a starter-generator early and flywheel alternator late charging system. Attachments include 44" and 48" mid-mount mower decks and a front-end loader with 600 lbs lift capacity. The serial number plate is located on the left side of the tractor just ahead of the steering column.
J.I. Case 644industrial tractorKohler K321 enginehydraulic drive14 hp tractortractor specifications600 Series Case tractor
Power-
Founded-
Model644

Technical Specifications

Detailed specifications and technical data for J.I. Case 644

Power

Engine power:14 hp (10.4 kW)

Tires

Industrial rear:27x8.50-15
Industrial front:5.70-8

Engine

Type:gasoline
Model:Kohler K321
Power:14 hp (10.4 kW)
Cooling:air-cooled horizontal-shaft
Starter:electric
Cylinders:1-cylinder
Point gap:0.020 inches (0.508 mm)
Rated RPM:3600
Bore/Stroke:3.50x3.25 inches (89 x 83 mm)
Compression:6:1
Displacement:31.27 ci (0.5 L)
Oil capacity:1.5 qts (1.4 L)
Sparkplug gap:0.025 inches (0.635 mm)
Starter volts:12
Oil change interval:25 h
Intake valve clearance:0.010 inches (Cold) (0.254 mm)
Exhaust valve clearance:0.020 inches (Cold) (0.508 mm)

Capacity

Fuel:5 gal (18.9 L)
Hydraulic system:3 gal (11.4 L)

Dimensions

Width:41 inches (At rear wheels) (104 cm)
Length:108 inches (Length with integral loader) (274 cm)
Weight:1130 lbs (loader-tractor) (512 kg)
Wheelbase:48 inches (121 cm)
Rear tread:32.4 inches (82 cm)
Front tread:29.75 inches (75 cm)
Ground clearance:8.25 inches (20 cm)
Height (steering wheel):43.25 inches (109 cm)

Electrical

Ground:negative
Battery AH:32
Battery volts:12
Charging volts:12
Charging system:starter-generator (Early), flywheel alternator (Late, starting at serial number 9757919)

Hydraulics

Type:open center
Capacity:3 gal (11.4 L)
Pressure:2300 psi (158.6 bar)
Pump flow:9 gpm (34.1 lpm)

Mechanical

Drive:Two-wheel drive
Brakes:Mechanical band brakes
Steering:Manual steering
Operator station:Open operator station

Production

Type:Industrial tractor
Series:600 Series
Manufacturer:J.I. Case
Years produced:1972 - 1979

Attachments

Front-end loader:600 lbs lift (full at pin) (272 kg), 54° dump, 13.75 inches reach (dumped) (34 cm), 18° rollback, 71.75 inches height (at pin) (182 cm), 52.88 inches clearance (dumped) (134 cm), Bucket width: 44 inches (111 cm)
44" mid-mount mower deck:44 inches (111 cm), 3-blade
48" mid-mount mower deck:48 inches (121 cm), 3-blade

Transmission

Type:hydraulic drive
Gears:infinite forward and reverse (2-range)
Model:Hy-Drive

Tractor hitch

Rear Type:0

Serial Numbers

Location:Serial number plate on left side of tractor, just ahead of steering column.

Related Models

J.I. Case 646

Model:646