Case industrial tractors

J.I. Case 680 Construction King

The J.I. Case 680 Construction King is an industrial tractor produced from 1966 to 1968. It features a 71 hp engine with options for a 4.4L 4-cylinder diesel or a 4.1L 4-cylinder gasoline engine. The tractor has a 4-speed power shuttle transmission, two-wheel drive, hydrostatic power steering, and hydraulic disc brakes. It has an open operator station and supports front-end loader attachments with a lift capacity of 5000 lbs and breakout force of 10050 lbs. The tractor's dimensions include an 80.5 inch wheelbase, 194.5 inch length, and weighs approximately 12375 lbs. It uses 11Lx16 front tires and 16.9x24 rear tires. The hydraulic system is open center with a total flow of 42 gpm at 2150 psi pressure. Electrical system includes a 55 amp alternator and two 12-volt batteries.
Power-
Founded-
Model680

Technical Specifications

Detailed specifications and technical data for J.I. Case 680 Construction King

Power
Engine (net)64 hp (47.7 kW)
Engine (gross)71 hp (52.9 kW)
Tires
Rear tire16.9x24
Front tire11Lx16
Engine
Torque203 lb-ft (275.3 Nm)
Coolingliquid-cooled
Starterelectric
Cylinders4-cylinder
Rated RPM2000
Torque RPM1300
Bore/Stroke4.00x5.00 inches (102 x 127 mm)
Compression7.5:1
Power (net)63.5 hp (47.4 kW)
Displacement251 ci (4.1 L)
Power (gross)71 hp (52.9 kW)
Starter volts12
Engine optionsJ.I. Case 4.4L 4-cyl diesel, J.I. Case 4.1L 4-cyl gasoline
Weight
Shipping12375 lbs (5613 kg) (loader tractor)
Max front axle static11000 lbs (4989 kg)
Max front axle dynamic44000 lbs (19958 kg)
Capacity
Fuel28 gal (106.0 L)
Hydraulic system17.5 gal (66.2 L)
Dimensions
Length194.5 inches (494 cm)
Wheelbase80.5 inches (204 cm)
Rear tread66.75 inches (169 cm)
Front tread70.75 inches (179 cm)
Height (exhaust)95.75 inches (243 cm)
Clearance (rear axle)13.25 inches (33 cm)
Height (steering wheel)79 inches (200 cm)
Electrical
Batteries2
Battery volts12
Charging amps55
Charging systemalternator
Hydraulics
Typeopen center
Capacity17.5 gal (66.2 L)
Pressure2150 psi (148.2 bar)
Pump flow25 gpm (94.6 lpm)
Total flow42 gpm (159.0 lpm)
Auxiliary flow17 gpm (64.3 lpm)
Mechanical
DriveTwo-wheel drive
BrakesHydraulic disc brakes
Steeringhydrostatic power
Operator stationOpen operator station
Production
TypeIndustrial tractor
Years made1966 - 1968
ManufacturerJ.I. Case
Attachments
Dump time1.5s
Dump angle45°
Lower time3.2s
Raise time5.5s
Bucket width85 inches (215 cm)
Reach (ground)66.5 inches (168 cm)
Height (at pin)123.5 inches (313 cm)
Loader lift capacity5000 lbs (2268 kg) full at pin
Loader breakout force10050 lbs (4558 kg) at pin
Rollback (ground line)39°
Transmission
Typepower shuttle
Gears4 forward and reverse