Case industrial tractors
J.I. Case W-930
The J.I. Case W-930 is an industrial tractor produced from 1960 to 1963 by J.I. Case in Racine, Wisconsin, USA. It features a 6.6L 6-cylinder diesel engine producing 95 hp (70.8 kW) gross power. The tractor has a 6-speed gear transmission with 6 forward and 1 reverse gears, two-wheel drive with roller chain final drives, and power steering. It includes an open operator station and an independent rear PTO with a wet disc clutch. The hydraulics system is open center with 1000 psi pressure and 17 gpm pump flow. The W-930 weighs 8320 lbs (3773 kg) and rides on 7.50x18 front tires and 18.00x26 rear tires. Electrical system features a negative ground, generator charging, and two 6-volt batteries.
Power-
Founded-
ModelW-930
Technical Specifications
Detailed specifications and technical data for J.I. Case W-930
Power
| Engine (gross) | 95 hp (70.8 kW) |
|---|
Tires
| Rear tire | 18.00x26 |
|---|---|
| Front tire | 7.50x18 |
Engine
| Type | diesel, 6-cylinder, liquid-cooled |
|---|---|
| Model | J.I. Case 6.6L 6-cyl diesel |
| Starter | electric |
| Idle RPM | 600-1750 |
| Fuel tank | 28 gal (106.0 L) |
| Rated RPM | 1600 |
| Air cleaner | oil bath |
| Bore/Stroke | 4.125x5.00 inches (105 x 127 mm) |
| Displacement | 401 ci (6.6 L) |
| Firing order | 1-5-3-6-2-4 |
| Oil capacity | 14 qts (13.2 L) |
| Power (gross) | 95 hp (70.8 kW) |
| Starter volts | 12 |
| Coolant capacity | 42 qts (39.7 L) |
| Intake valve clearance | 0.025 inches (cold) (0.635 mm) |
| Exhaust valve clearance | 0.025 inches (cold) (0.635 mm) |
Dimensions
| Width | 92 inches (233 cm) |
|---|---|
| Weight | 8320 lbs (3773 kg) |
| Rear tread | 71 inches (180 cm) |
| Front tread | 63.5 inches (161 cm) |
| Shipping weight | 8320 lbs (3773 kg) |
Electrical
| Ground | negative |
|---|---|
| Batteries | 2 |
| Battery AH | 200 |
| Battery volts | 6 |
| Charging system | generator |
Hydraulics
| Type | open center |
|---|---|
| Pressure | 1000 psi (69.0 bar) |
| Pump flow | 17 gpm (64.3 lpm) |
Mechanical
| Drive | Two-wheel drive |
|---|---|
| Final drives | roller chain |
| Power steering | yes |
| Operator station | Open operator station |
Production
| Type | Industrial tractor |
|---|---|
| Built in | Racine, Wisconsin, USA |
| Manufacturer | J.I. Case |
| Years produced | 1960 - 1963 |
Belt Pulley
| RPM | 1007 |
|---|---|
| Speed | 3100 ft/min (944.88 meters/min) |
| Width | 8.25 inches (20 cm) |
| Diameter | 11.75 inches (29 cm) |
Transmission
| Type | gear |
|---|---|
| Gears | 6 forward and 1 reverse |
| Description | 6-speed gear |
Serial Numbers
| Location | Serial number plate on the right of the W-930, on the side of the instrument panel. |
|---|
Power Take-off (PTO)
| Clutch | wet disc |
|---|---|
| Rear PTO | independent |
| Engine RPM | 540@1450 |
| Rear PTO Type | 540 (1.375) |
More Case industrial tractors models
View all Case industrial tractors modelsJ.I. Case 1150Model1150
J.I. Case 1150 LoaderModel1150 Loader
J.I. Case 1150BModel1150B
J.I. Case 1150B LoaderModel1150B Loader
J.I. Case 1150CModel1150C
J.I. Case 1150C LoaderModel1150C Loader
J.I. Case 1150DModel1150D
J.I. Case 1150EModel1150E
J.I. Case 1150GModel1150G
J.I. Case 1150HModel1150H
J.I. Case 1150KModel1150K
J.I. Case 1150LModel1150L