Tractorpedia.com

J.I. Case 600

J.I. Case 600 tractor
View Images
The J.I. Case 600 is a standard-tread farm tractor produced in 1957 by J.I. Case in Racine, Wisconsin, USA. It features a 6.2L 6-cylinder diesel engine with an estimated 77.8 hp engine power. The tractor has a 6-speed gear transmission with mechanical wet disc clutch and two-wheel drive with power assist steering. It includes an open operator station, disc brakes, and optional open center hydraulics. The 600 series includes diesel, LP-gas, and industrial variants. It has a rear independent PTO optional with mechanical wet disc clutch. The tractor weighs 7500 lbs and has a wheelbase of 87.3 inches. Fuel capacity is 30 gallons and hydraulic system capacity is 3.5 gallons. The electrical system uses a 12 amp generator with two 6-volt batteries.
J.I. Case 600tractorfarm tractordiesel tractor6-cylinder engine6-speed transmissionPTOhydraulicsdimensions
Power77 hp[B]
Founded1957
Model600

Technical Specifications

Detailed specifications and technical data for J.I. Case 600

Power

Belt (claimed):70 hp (52.2 kW)

Tires

Ag rear:15-34, 18-26, 14-30, 15-30, 15-34
Ag front:7.50-18

Engine

Type:J.I. Case 6.2L 6-cyl diesel
Detail:diesel, 6-cylinder, liquid-cooled
Starter:electric
Idle RPM:600-1635
Rated RPM:1500
Air cleaner:oil bath
Bore/Stroke:4.00x5.00 inches (102 x 127 mm)
Compression:15:1
Pre-heating:ether injection
Displacement:377 ci (6.2 L)
Firing order:1-5-3-6-2-4
Oil capacity:14 qts (13.2 L)
Starter volts:12
Coolant capacity:56 qts (53.0 L)
Intake valve clearance:0.012 inches (cold) (0.305 mm)
Exhaust valve clearance:0.012 inches (cold) (0.305 mm)

Height

Hood:64.5 inches (163 cm)
Exhaust:92.5 inches (234 cm)
Overall:85.3 inches (216 cm)

Capacity

Fuel:30 gal (113.6 L)
Hydraulic system:3.5 gal (13.2 L)

Variants

600:diesel
610:LP-gas
620:industrial

Dimensions

Length:144.3 inches (366 cm)
Weight:7500 lbs (3402 kg)
Wheelbase:87.3 inches (221 cm)
Rear tread:67.5 inches (171 cm)
Front tread:53.8 inches (136 cm)
Ground clearance:14.2 inches (36 cm)

Electrical

Ground:negative
Batteries:2
Battery volts:6
Charging amps:12
Charging system:generator

Hydraulics

Type:open center (Optional)
Capacity:3.5 gal (13.2 L)
Pressure:1000 psi (69.0 bar)
Pump flow:15 gpm (56.8 lpm)

Mechanical

Drive:Two-wheel drive
Brakes:Disc brakes
Steering:power assist
Operator station:Open operator station

Production

Type:Standard-tread tractor
Built in:Racine, Wisconsin, USA
Total built:1,515
Manufacturer:J.I. Case

Belt Pulley

RPM:944
Speed:3338 ft/min (1017.42 meters/min)
Width:8.25 inches (20 cm)
Diameter:13.5 inches (34 cm)

Transmission

Type:gear
Gears:6 forward and 1 reverse
Clutch:mechanical wet disc
Oil type:SAE 90
Oil capacity:64 qts (60.6 L)

Power Take-off (PTO)

Clutch:mechanical wet disc
Rear PTO:independent (Optional)
Engine RPM:540@1475
Rear PTO Type:540 (1.375)

Related Models

J.I. Case 500

Model:500