Tractorpedia.com

J.I. Case 830

J.I. Case 830 tractor
View Images
The J.I. Case 830 is a standard-tread farm tractor produced from 1960 to 1969 by J.I. Case in Racine, Wisconsin, USA. It features a 4.9L 4-cylinder diesel engine with an estimated 73.3 hp, available with either an 8-speed gear or 8-speed torque converter transmission. The tractor has a power take-off with independent rear PTO and supports up to 5 plows. It includes power assist steering, mechanical dry disc brakes, and an open operator station. The 830 series was offered in multiple variants including diesel and gas models with different front and crop configurations. It has a wheelbase of 82.75 inches and weighs between 5694 and 5837 pounds depending on transmission. Attachments include the 295 Loader with a 3000 lbs breakout force. The original price was $6,000 in 1969.
J.I. Case 830tractorfarm tractordiesel engine4.9L8-speed transmissionpower take-offhydraulicsdimensionsattachments
Power73 hp[B]
Founded1960 - 1969
Model830

Technical Specifications

Detailed specifications and technical data for J.I. Case 830

Power

Plows:5
Belt (claimed):66 hp (49.2 kW)

Engine

Type:J.I. Case 4.9L 4-cyl diesel
Details:diesel, 4-cylinder, liquid-cooled
Rated RPM:1700 (Dual-Range), 1900 (Case-O-Matic)
Air cleaner:oil bath
Bore/Stroke:4.375x5.00 inches (111 x 127 mm)
Displacement:301 ci (4.9 L)
Firing order:1-3-4-2
Oil capacity:9 qts (8.5 L)
Starter volts:12
Coolant capacity:29.6 qts (28.0 L)
Compression ratio:15:1

Capacity

Fuel:22 gal (83.3 L)
Hydraulic system:17 gal (64.3 L)

Variants

830:diesel standard-front
831:diesel row-crop
832:diesel Western Special
833:diesel high-crop
840:gas standard-front
841:gas row-crop
842:gas Western Special
843:gas high-crop

Electrical

Ground:negative
Batteries:2
Battery volts:6
Charging system:generator

Hydraulics

Type:open center
Capacity:17 gal (64.3 L)
Pressure:1550 psi (106.9 bar)

Mechanical

Drive:Two-wheel drive
Brakes:Mechanical dry disc brakes
Steering:power assist
Operator station:Open operator station

Production

Type:Standard-tread tractor
Series:830 Series
Built in:Racine, Wisconsin, USA
Original price:$6,000 in 1969
Years produced:1960 - 1969

Attachments

295 Loader

Weight:1209 lbs (548 kg)
Dump angle:75°
Bucket width:40 inches (101 cm)
Boom cylinder:2.5 inches (6 cm)
Breakout force:3000 lbs (1360 kg)
Bucket cylinder:2.25 inches (5 cm)
Height (at pin):108 inches (274 cm)
front-end loader:-

Belt Pulley

RPM:1322 (Dual Range), 1027 (Case-O-Matic 540), 1261 (Case-O-Matic 1000)
Width:7.25 inches (18 cm)
Diameter:10.5 inches (26 cm)

Transmission

Options:8-speed gear, 8-speed torque converter

Dual Range

Type:gear
Gears:8 forward and 2 reverse
Clutch:dry disc
Oil capacity:9 qts (Eagle Hitch) (8.5 L), 68 qts (64.4 L)

Case-O-Matic

Type:torque converter
Gears:8 forward and 2 reverse
Clutch:wet disc

Tractor hitch

Type:Case Eagle Hitch
Control:Draft-o-matic load/depth control
Rear Type:II

Serial Numbers

1960:8160001
1961:8168801
1962:8190001
1963:8208001
1964:8229001
1965:8253501
1966:8279001
1967:8306501
1968:8332101
1969:8356251
Location:Plate on instrument panel

Dimensions & Tires

Width:66.625 inches (169 cm)
Length:133.75 inches (339 cm)
Weight:5694 lbs (Dual-Range) (2582 kg), 5837 lbs (Case-o-matic) (2647 kg)
Rear tire:13-30
Wheelbase:82.75 inches (210 cm)
Front tire:6.00-16
Rear tread:52 to 64 inches (132 to 162 cm)
Front tread:52/55/58 inches (132/139/147 cm)
Height (hood):61.375 inches (155 cm)

Power Take-off (PTO)

Rear PTO:independent
Rear PTO Type:540/1000 (1.375)

Related Models

J.I. Case 800-B

Model:800-B