Case

J.I. Case RC

The J.I. Case RC is a row-crop tractor produced from 1935 to 1940 by J.I. Case in Racine, Wisconsin, USA. It features a Waukesha 2.2L 4-cylinder gasoline engine, with a 3-speed or 4-speed gear transmission. The tractor has a two-wheel drive with bull gear final drives and manual steering. It has an open operator station and a rear PTO type of 540 (1.125). The RC variant is designed for row-crop use, with a weight of 4045 lbs (1834 kg) and dimensions suitable for agricultural tasks. It was built in several variants including standard tread (R), row-crop (RC), and orchard (RO).
Power18 hp[B]
Founded1935 - 1940
ModelRC

Technical Specifications

Detailed specifications and technical data for J.I. Case RC

Power
Plows2
Belt (tested)19.80 hp (14.8 kW)
Belt (claimed)17 hp (12.7 kW)
Drawbar (tested)14.21 hp (10.6 kW)
Drawbar (claimed)11 hp (8.2 kW)
Tires
Ag rear10x38, 6x48 (steel)
Ag front5x15, 6x20.5 (steel)
Single-front7.50x10
Engine
MakeWaukesha
Typegasoline, 4-cylinder, liquid-cooled vertical L-head
Fuel tank15 gal (56.8 L)
Rated RPM1425
Air cleaneroil bath
Bore/Stroke3.25x4.00 inches (83 x 102 mm)
Displacement132.7 ci (2.2 L)
Oil capacity5 qts (4.7 L)
Coolant capacity17 qts (16.1 L)
Variants
Rstandard tread
RCrow-crop
ROorchard
Dimensions
Width63 inches (160 cm)
Height44 inches (111 cm)
Length124.5 inches (316 cm)
Weight4045 lbs (1834 kg)
Rear tread44 to 80 inches (111 to 203 cm)
Mechanical
DriveTwo-wheel drive
SteeringManual steering
Final drivesbull gear
Operator stationOpen operator station
Production
TypeRow-Crop tractor
Built inRacine, Wisconsin, USA
Years made1935 - 1940
Total built15,948
ManufacturerJ.I. Case
Belt Pulley
RPM991
Speed2600 ft/min (792.48 meters/min)
Width6.25 inches (15 cm)
Diameter10.125 inches (25 cm)
Transmission
Typegear
Gears3 forward and 1 reverse; 4 forward and 1 reverse (4-speed became standard in 1939, serial number 4325361)
Clutchmechanical wet disc
Power Take-off (PTO)
Rear PTO Type540 (1.125)