CaseIH
CaseIH 495
The CaseIH 495 is a utility tractor produced from 1991 to 1994 as part of the 95 Utility Series. Built in Doncaster, England, it features a 2.9L 3-cylinder diesel engine delivering 50 hp net and 53 hp gross power. The tractor offers multiple transmission options including partially synchronized, partial power shift, synchronized shuttle, and creeper types. It supports two- or four-wheel drive with power steering and hydraulic wet disc brakes. The 495 has a fuel capacity of 20 gallons and a hydraulic system capacity of 9 gallons. Dimensions include a 79.8 inch wheelbase, 136 inch length, and 66 inch width with ROPS height of 93.5 inches. It can be equipped with Case IH 2200 or 2250 front-end loaders for enhanced utility.
Power53 hp
Founded1991 - 1994
Model495
Technical Specifications
Detailed specifications and technical data for CaseIH 495
Power
| Engine (net) | 50 hp (37.3 kW) |
|---|---|
| PTO (claimed) | 42 hp (31.3 kW) |
| Engine (gross) | 53 hp (39.5 kW) |
Tires
| Ag rear | 14.9-24 |
|---|---|
| Ag front | 6.00-16 |
Engine
| Type | diesel |
|---|---|
| Model | Case IH D-179 |
| Cooling | liquid-cooled |
| Idle RPM | 700-2400 |
| Cylinders | 3-cylinder |
| Rated RPM | 2200 |
| Bore/Stroke | 3.88x5.06 inches (99 x 129 mm) |
| Power (net) | 50 hp (37.3 kW) |
| Displacement | 179 ci (2.9 L) |
| Oil capacity | 8.2 qts (7.8 L) |
| Power (gross) | 53 hp (39.5 kW) |
| Starter volts | 12 |
| Coolant capacity | 12 qts (11.4 L) |
Capacity
| Fuel | 20 gal (75.7 L) |
|---|---|
| Hydraulic system | 9 gal (34.1 L) |
Dimensions
| Width | 66 inches (167 cm) *With at minimum tread. |
|---|---|
| Length | 136 inches (345 cm) |
| Wheelbase | 79.8 inches (202 cm) |
| Height (ROPS) | 93.5 inches (237 cm) |
| 2WD Shipping weight | 5200 lbs (2358 kg) |
| 4WD Shipping weight | 6090 lbs (2762 kg) |
| 2WD Clearance (front axle) | 22.1 inches (56 cm) |
| 4WD Clearance (front axle) | 14 inches (35 cm) |
Electrical
| Ground | negative |
|---|---|
| Battery volts | 12 |
| Charging system | alternator |
Hydraulics
| Type | open center |
|---|---|
| Valves | 1 |
| Capacity | 9 gal (34.1 L) |
| Pump flow | 15.6 gpm (59.0 lpm) |
Mechanical
| ROPS | Two-post ROPS |
|---|---|
| Drive | Two- or four-wheel drive |
| Brakes | Hydraulic wet disc brakes |
| Steering | Power steering |
Production
| Type | Utility tractor |
|---|---|
| Series | 95 Utility Series |
| Built in | Doncaster, England |
| Original price | $19,000 in 1994 |
| Years produced | 1991 - 1994 |
Attachments
| Overview | Case IH 2200 loader, Case IH 2250 loader |
|---|---|
| Case IH 2200 Loader | Breakout2550 lbs (1156 kg) Height (at pin)103 inches (261 cm) Lift (full at pin)1700 lbs (771 kg) |
| Case IH 2250 Loader | Breakout3500 lbs (1587 kg) Height (at pin)123 inches (312 cm) Lift (full at pin)2500 lbs (1134 kg) |
Transmission
| Creeper | Typecreeper Gears16 forward and 8 reverse DetailsFour gears with high, low, and reverse ranges plus direct or creeper mode. |
|---|---|
| Options | 8-speed partially synchronized, 16-speed partial power shift, 8-speed synchronized shuttle, 16-speed creeper |
| Partial power shift | Typepartial power shift Gears16 forward and 8 reverse DetailsFour gears with high, low, and reverse ranges. Power shift between direct and lower speed in each gear. Oil capacity36 qts (34.1 L) |
| Synchronized shuttle | Typesynchronized shuttle Gears8 forward and reverse DetailsFour gears each in high and low ranges, both forward and reverse. Oil capacity36 qts (34.1 L) |
| Partially synchronized | Typepartially synchronized Gears8 forward and 4 reverse Clutchdry disc DetailsFour gears with high, low, and reverse ranges. Synchronized shifts within high and low ranges. Oil capacity36 qts (34.1 L) |
Tractor hitch
| Rear Type | II/I |
|---|---|
| Rear lift | 2340 lbs (1061 kg) |
Power Take-off (PTO)
| Rear PTO | independent |
|---|---|
| Rear PTO Type | 540 |