CaseIH 9260
The CaseIH 9260 is a four-wheel drive (4WD) tractor produced from 1990 to 1995 as part of the 9200 Series. Built in Fargo, North Dakota, USA, it was one of the last rigid-frame 4WD tractors with four-wheel steering, following the style of the large J.I. Case "crab steer" tractors. It features a Cummins 10.0L 6-cylinder turbocharged aftercooled diesel engine producing 300 hp, paired with a 12-speed full power shift transmission. The tractor has a four-wheel hydrostatic power steering system and a standard cab with air-conditioning, with an optional deluxe cab available. It has a fuel capacity of 200 gallons and a hydraulic system capacity of 18 gallons. The tractor's dimensions include a 124-inch wheelbase, 250.3-inch length, and a weight of 22,000 lbs. It uses 20.8-38 tires on both front and rear. The 9260 model was offered alongside articulated and other variants in the 9200 Series.
Power300 hp
Founded1990 - 1995
Model9260
Technical Specifications
Detailed specifications and technical data for CaseIH 9260
Power
| Engine power | 300 hp (223.7 kW) |
|---|---|
| PTO (claimed) | 265 hp (197.6 kW) |
Engine
| Type | turbocharged aftercooled diesel |
|---|---|
| Power | 300 hp (223.7 kW) |
| Torque | 1015 lb-ft (1376.3 Nm) |
| Cooling | liquid-cooled |
| Cylinders | 6-cylinder |
| Rated RPM | 2100 |
| Torque RPM | 1400 |
| Bore/Stroke | 4.92x5.35 inches (125 x 136 mm) |
| Displacement | 611 ci (10.0 L) |
| Manufacturer | Cummins |
| Oil capacity | 44 qts (41.6 L) |
| Starter volts | 12 |
| Coolant capacity | 54 qts (51.1 L) |
Capacity
| Fuel | 200 gal (757.0 L) |
|---|---|
| Hydraulic system | 18 gal (68.1 L) |
Variants
| 9250 | articulated |
|---|---|
| 9260 | four-wheel steer |
Electrical
| Ground | negative |
|---|---|
| Battery volts | 12 |
Hydraulics
| Type | closed center |
|---|---|
| Valves | 4 |
| Capacity | 18 gal (68.1 L) |
| Pressure | 2500 psi (172.4 bar) |
| Total flow | 27 gpm (102.2 lpm) |
Mechanical
| Cab | standard with air-conditioning. Optional deluxe cab adds side and rear window wipers plus internal storage compartments. |
|---|---|
| Drive | 4x4 4WD |
| Steering | four-wheel hydrostatic power |
Production
| Type | Four-wheel Drive (4WD) tractor |
|---|---|
| Notes | The 9260 and 9240 were the last of the rigid-frame 4WD with four-wheel steering, in the style of the large J.I. Case "crab steer" tractors. |
| Series | 9200 Series |
| Built in | Fargo, North Dakota, USA |
| Original price | $127,000 in 1995 |
| Years produced | 1990 - 1995 |
Transmission
| Type | full power shift |
|---|---|
| Gears | 12 forward and 3 reverse |
| Notes | Full power shift transmission operated with two right-hand levers; one for shifting gears and the other for forward/reverse. Skip-Shift feature allows the transmission to quickly shift from first into higher gears (4th, 6th, 8th). |
| Clutch | hydraulic wet disc |
Tractor hitch
| Control | draft control optional |
|---|---|
| Rear Type | III Optional |
| Rear lift | 12750 lbs (5783 kg) |
Serial Numbers
| 1990 | JCB0004600 |
|---|---|
| 1991 | JCB0026501 |
| 1992 | JCB0028400 |
| 1993 | JCB0030500 |
| 1994 | JEE0031773 |
| 1995 | JEE0032808 |
| Location | Under the left-side steps on front fender |
Dimensions & Tires
| Width | 93.5 inches (minimum) (237 cm), 151.8 inches (duals) (385 cm) |
|---|---|
| Length | 250.3 inches (635 cm) |
| Weight | 22000 lbs (9979 kg) |
| Rear tire | 20.8-38 |
| Wheelbase | 124 inches (314 cm) |
| Front tire | 20.8-38 |
| Height (exhaust) | 143.0 inches (363 cm) |
Power Take-off (PTO)
| Rear PTO | independent Optional |
|---|---|
| Rear PTO Type | 1000 |
