CaseIH

CaseIH Farmall 85U

The CaseIH Farmall 85U is a utility tractor produced from 2008 to 2014 as part of the Farmall U Series. It features an 85 hp turbocharged intercooled 4.5L 4-cylinder diesel engine by FPT, with a variety of transmission options including mechanical and power shuttle types. The tractor offers 2WD or optional 4WD drive, hydrostatic power steering, and hydraulic wet disc brakes. It has an open center hydraulic system with multiple valves and a rear PTO with 540 or optional 540/1000 rpm. The Farmall 85U supports front-end loader attachments such as the CaseIH L730 and L740 loaders. It was built in Jesi, Italy, and is designed for versatile utility tasks on the farm.

Power85 hp

Founded2008 - 2014

ModelFarmall 85U

View Images

Technical Specifications

Detailed specifications and technical data for CaseIH Farmall 85U

Power

PTO (tested)	74.6 hp (55.6 kW)
PTO (claimed)	70 hp (52.2 kW)
Engine (gross)	85 hp (63.4 kW)

Engine

Type	turbocharged intercooled diesel
Cooling	liquid-cooled
Starter	electric
Cylinders	4-cylinder
Emissions	Tier 3
Fuel tank	33.5 gal (126.8 L)
Rated RPM	2300
Air cleaner	dual dry elements
Bore/Stroke	4.094x5.197 inches (104 x 132 mm)
Compression	17:1
Pre-heating	grid heater
Displacement	274 ci (4.5 L)
Manufacturer	FPT
Power (gross)	85 hp (63.4 kW)
Starter volts	12

Dimensions

Weight	6393 to 7496 pounds
Wheelbase	92.2 inches (2WD) (234 cm), 92.5 inches (4WD) (234 cm)
Height Cab	100.8 inches (256 cm)
Height ROPS	108.9 inches (276 cm)
Height Exhaust	117.5 inches (298 cm)
Shipping weight	6,393 lbs (2WD ROPS) (2899 kg), 7,055 lbs (4WD ROPS) (3200 kg), 6,834 lbs (2WD cab) (3099 kg), 7,496 lbs (4WD cab) (3400 kg)

Electrical

Ground	negative
Battery CCA	960
Battery volts	12
Charging amps	120
Charging system	alternator

Hydraulics

Type	open center
Valves	2 rear, 1 mid (optional)
Pump flow	16.1 gpm (60.9 lpm)
Total flow	26.5 gpm (100.3 lpm)
Steering flow	10.4 gpm (39.4 lpm)

Mechanical

Drive	4x2 2WD, 4x4 MFWD 4WD (optional)
Brakes	Hydraulic wet disc brakes
Platform	Flat deck platform with ROPS; cab optional
Steering	hydrostatic power

Production

Type	Utility tractor
Series	Farmall U Series
Built in	Jesi, Italy
Years made	2008 - 2014

Attachments

Overview	CaseIH L730 loader, CaseIH L740 loader
L730 Loader	2,500 lbs lift (full at pin) (1134 kg), 3,100 lbs breakout (1406 kg), 57° dump, 33 inches reach (dumped) (83 cm), 46° rollback, 136 inches height (at pin) (345 cm), 98 inches clearance (dumped) (248 cm)
L740 Loader	3,200 lbs lift (full at pin) (1451 kg), 3,850 lbs breakout (1746 kg), 59° dump, 34 inches reach (dumped) (86 cm), 46° rollback, 144 inches height (at pin) (365 cm), 106 inches clearance (dumped) (269 cm)

Transmission

Options	12-speed mechanical shuttle, 20-speed mechanical shuttle with creeper, 12-speed power shuttle, 24-speed power shuttle with partial power shift
12-speed power shuttle	Type: power shuttle, Gears: 12 forward and reverse, Clutch: dry disc
12-speed mechanical shuttle	Type: mechanical shuttle, Gears: 12 forward and reverse, Clutch: dry disc, Three ranges with four gears per range. Left-hand reverser requires use of clutch to change directions
20-speed mechanical shuttle with creeper	Type: mechanical shuttle with creeper, Gears: 20 forward and 12 reverse, Clutch: dry disc
24-speed power shuttle with partial power shift	Type: power shuttle with partial power shift, Gears: 24 forward and reverse, Clutch: wet disc, 12x12 power shuttle with high-low power shift

Tractor hitch

Control	mechanical lower-link draft control, optional electronic draft control (EDC)
Rear Type	2
Rear lift (at 24"/610mm)	5,745 lbs (2605 kg), 6,445 lbs (EDC) (2923 kg)

Power Take-off (PTO)