CaseIH

CaseIH Farmall 95

The CaseIH Farmall 95 is a utility tractor produced from 2008 to 2010 by Turk Tractor in Ankara, Turkey. It is part of the Farmall Utility Series and features a 90 hp turbocharged intercooled 4-cylinder diesel engine from FPT. The tractor offers two transmission options: a 12-speed mechanical shuttle and a 20-speed mechanical shuttle with creeper. It has two- or four-wheel drive, mechanical rear differential lock, power steering, and hydraulic wet disc brakes. The Farmall 95 supports a rear PTO with 540 rpm standard and optional 540/1000 rpm. It has an open center hydraulic system with up to 3 rear valves and a rear hitch with position control and mechanical lower-link draft sensing. The tractor weighs between 6,107 and 7,320 lbs depending on configuration and has a wheelbase of 92-94 inches. Attachments include the Case IH L730 front-end loader with a 2,500 lbs lift capacity and 3,300 lbs breakout force.
Power90 hp
Founded2008 - 2010
ModelFarmall 95

Technical Specifications

Detailed specifications and technical data for CaseIH Farmall 95

Power
PTO (tested)80.7 hp (60.2 kW)
PTO (claimed)80 hp (59.7 kW)
Engine (gross)90 hp (67.1 kW)
Drawbar (tested)74.4 hp (55.5 kW)
Engine
Typeturbocharged intercooled diesel
Coolingliquid-cooled
Starterelectric
Cylinders4-cylinder
EmissionsTier 3
Fuel tank23.8 gal (90.1 L)
Rated RPM2500
Air cleanerdual dry elements
Bore/Stroke4.094x5.196 inches (104 x 132 mm)
Fuel systemdirect injection with mechanical governor
Pre-heatingthermostart
Displacement274 ci (4.5 L)
ManufacturerFPT
Power (gross)90 hp (67.1 kW)
Starter volts12
Weight
2WD cab6,768 lbs (3069 kg)
4WD cab7,320 lbs (3320 kg)
2WD ROPS6,107 lbs (2770 kg)
4WD ROPS6,659 lbs (3020 kg)
Variants
TD5050similar New Holland model
Dimensions
Height (cab)103.1 inches (261 cm)
2WD Wheelbase94 inches (238 cm)
4WD Wheelbase92 inches (233 cm)
Height (ROPS)101.1 inches (256 cm)
Electrical
Groundnegative
Battery CCA800
Battery volts12
Charging amps85
Charging systemalternator
Hydraulics
Typeopen center
Pressure2755 psi (190.0 bar)
Pump flow13.6 gpm (51.5 lpm)
Total flow21.7 gpm (82.1 lpm)
Rear valves1 to 3
Steering flow8.1 gpm (30.7 lpm)
Mechanical
DriveTwo- or four-wheel drive
BrakesHydraulic wet disc brakes
PlatformFlat deck platform with ROPS. Cab optional.
Power steeringYes
Differential lockmechanical rear lock
Production
TypeUtility tractor
SeriesFarmall Utility Series
Built inAnkara, Turkey
DistributorCaseIH
ManufacturerTurk Tractor
Years produced2008 - 2010
Attachments
Loader modelCase IH L730 Loader
front-end loaderYes
Loader dump angle58° dump
Loader lift capacity2,500 lbs lift (full at pin) (1134 kg)
Loader breakout force3,300 lbs breakout (1496 kg)
Loader reach (dumped)36 inches reach (dumped) (91 cm)
Loader rollback angle45° rollback
Loader height (at pin)136 inches height (at pin) (345 cm)
Loader clearance (dumped)98 inches clearance (dumped) (248 cm)
Transmission
Typemechanical shuttle
Gears12 forward and reverse
Clutchmechanical dry disc
DetailsThree ranges with four gears per range. Left-hand reverser requires use of clutch to change directions
Optional gears20 forward and 12 reverse
Optional transmissionmechanical shuttle with creeper
Tractor hitch
Controlposition control and mechanical lower-link draft sensing
Rear TypeII
Rear lift (at 24"/610mm)5025 lbs (2279 kg)
Power Take-off (PTO)
Clutchmechanical dry clutch
Rear PTOindependent
Optional PTO540/1000 (1.375) Optional
Rear PTO Type540 (1.375)