CO-OP

CO-OP G

The CO-OP model G is a row-crop tractor built by Cletrac in Cleveland, Ohio, USA from 1939 to 1941. It is essentially the same as the Cletrac General GG. It features a Hercules IXA3 1.9L 4-cylinder liquid-cooled gasoline engine, a 3-speed gear transmission with 1 reverse, and two-wheel drive with manual steering. The tractor has an open operator station and a mid PTO type 560. It was built with a wheelbase of 80 inches, length of 118 inches, and a hood height of 55 inches. The shipping weight is 2105 lbs and ballasted weight is 3115 lbs. The tractor uses 5.50-16 front tires and 9-24 rear tires. Power output includes a claimed 18 hp belt power and tested drawbar power of 14.26 hp. Total production was 7,527 units.
Power20 hp[B]
Founded1939 - 1941
ModelG

Technical Specifications

Detailed specifications and technical data for CO-OP G

Power
Plows1 (14-inch)
Belt (tested)19.29 hp (14.4 kW)
Belt (claimed)18 hp (13.4 kW)
Drawbar (tested)14.26 hp (10.6 kW)
Tires
Rear tire9-24
Front tire5.50-16
Engine
Typegasoline
ModelHercules IXA3
Coolingliquid-cooled
Cylinders4-cylinder
Fuel tank12 gal (45.4 L)
Rated RPM1400 (drawbar), 1700 (belt)
Air cleaneroil bath
Bore/Stroke3.00x4.00 inches (76 x 102 mm)
Compression5.75:1
Displacement113.12 ci (1.9 L)
Oil capacity5 qts (4.7 L)
Starter typemanual start
Coolant capacity12 qts (11.4 L)
Dimensions
Length118 inches (299 cm)
Wheelbase80 inches (203 cm)
Height (hood)55 inches (139 cm)
Shipping weight2105 lbs (954 kg)
Ballasted weight3115 lbs (1412 kg)
Mechanical
DriveTwo-wheel drive
SteeringManual steering
Operator stationOpen operator station
Production
TypeRow-Crop tractor
Built inCleveland, Ohio, USA
DistributorCO-OP
Total built7,527
ManufacturerCletrac
Belt Pulley
RPM1065
Speed2825 ft/min (861.06 meters/min)
Width5.5 inches (13 cm)
Diameter9.5 inches (24 cm)
Transmission
Typegear
Gears3 forward and 1 reverse
Clutch9-inch dry plate
Oil capacity10 qts (9.5 L)
Serial Numbers
19391FA000
19405FA388
19411FA0086
19421FA6532
Power Take-off (PTO)
Mid PTO Type560