Tractorpedia.com

Craftsman 917.27636

The Craftsman 917.27636 is a 2005 garden tractor from the GT 5000 Series built by AYP and distributed by Craftsman (a part of Sears). It features a 25 hp Kohler CV730 721cc 2-cylinder air-cooled gasoline engine, hydrostatic transmission by Hydro Gear 331-3000 with infinite forward and reverse speeds, and two-wheel drive with manual steering. The tractor has an open operator station and is equipped with a 48" mid-mount mower deck with 3 blades and manual lift. The fuel tank capacity is 5 gallons (18.9 L), and the engine oil capacity is 2 quarts (1.9 L). Electrical system includes a 12-volt battery with 280 CCA and 35 AH, and a 15 amp charging system. The PTO is a mid independent type with electric clutch and pulley drive.
Craftsman 917.27636garden tractorKohler CV730 enginehydrostatic transmission25 hp2005 Craftsman tractor48 inch mower deck
Power25 hp
Founded48" deck
Model917.27636

Technical Specifications

Detailed specifications and technical data for Craftsman 917.27636

Engine

Type:gasoline, 2-cylinder, air-cooled
Model:Kohler CV730
Starter:electric
Fuel tank:5 gal
Rated RPM:3600
Sparkplug:Champion RC12YC
Air cleaner:paper cartridge with foam pre-cleaner
Bore/Stroke:3.3x2.6 inches
Compression:9:1
Displacement:721 cc
Oil capacity:2 qts
Fuel tank (L):18.9 L
Power (gross):25 hp
Sparkplug gap:0.030 inches
Starter volts:12
Bore/Stroke (mm):84 x 66 mm
Oil capacity (L):1.9 L
Power (gross kW):18.6 kW
Displacement (ci):44 ci
Sparkplug gap (mm):0.762 mm

General

Type:Garden tractor
Year:2005
Drive:Two-wheel drive
Series:GT 5000 Series
Steering:manual
Distributor:Craftsman (a part of Sears)
Manufacturer:AYP
Operator station:Open operator station

Electrical

Ground:negative
Battery AH:35
Battery CCA:280
Battery Group:U1R
Battery volts:12
Charging amps:15

Attachments

Belt:AYP 180808 (on deck), AYP 174368 (tractor to deck)
Type:mid-mount Craftsman
Blades:3-blade with manual lift
Cut height:1.5 to 4.5 inch
Cutting width:48 inches
48" Mower deck:48" mid-mount mower deck
Cut height (cm):3 to 11 cm
Cutting width (cm):121 cm

Transmission

Type:belt-driven hydrostatic
Gears:infinite forward and reverse
Model:Hydro Gear 331-3000
Transmission type:hydrostatic

Power Take-off (PTO)

Clutch:electric
Mid PTO:independent
Mid PTO Type:pulley