Denning
Denning E 10-18
The Denning E 10-18 is a standard-tread farm tractor produced by Denning from 1916 to 1918. It was built in Cedar Rapids, Iowa, USA. Powered by a Waukseha 3.3L 4-cylinder liquid-cooled gasoline engine, it delivers 10 hp at the drawbar and 18 hp at the belt. The tractor features a 6-speed friction disc transmission with 6 forward and reverse gears, two-wheel drive, and manual steering. It weighs 3600 lbs and rides on 46x10 steel rear tires. The open operator station and belt pulley dimensions of 10 inches diameter and 6 inches width complete its specifications.
Power-
Founded-
ModelE 10-18
Technical Specifications
Detailed specifications and technical data for Denning E 10-18
Power
| Plows | 2 |
|---|---|
| Belt (claimed) | 18 hp (13.4 kW) |
| Drawbar (claimed) | 10 hp (7.5 kW) |
Tires
| Rear tire | 46x10 steel |
|---|
Engine
| Make | Waukseha |
|---|---|
| Type | gasoline |
| Cooling | liquid-cooled |
| Aux. fuel | 5 gal (18.9 L) |
| Cylinders | 4-cylinder |
| Fuel tank | 15 gal (56.8 L) |
| Rated RPM | 1200 |
| Bore/Stroke | 3.50x5.25 inches (89 x 133 mm) |
| Displacement | 202 ci (3.3 L) |
| Coolant capacity | 28 qts (26.5 L) |
Dimensions
| Width | 56 inches (142 cm) |
|---|---|
| Height | 61 inches (154 cm) |
| Length | 120 inches (304 cm) |
| Weight | 3600 lbs (1632 kg) |
Mechanical
| Drive | Two-wheel drive |
|---|---|
| Steering | Manual steering |
| Operator station | Open operator station |
Production
| Type | Standard-tread tractor |
|---|---|
| Built in | Cedar Rapids, Iowa, USA |
| Years produced | 1916 - 1918 |
Belt Pulley
| Width | 6 inches (15 cm) |
|---|---|
| Diameter | 10 inches (25 cm) |
Transmission
| Type | friction disc |
|---|---|
| Gears | 6 forward and reverse |