Jacobsen lawn tractors

Jacobsen GT-16

The Jacobsen GT-16 is a garden tractor produced from 1973 to 1976 as part of the GT Series. It features a 16 hp Kohler K341AS 588cc 1-cylinder gasoline engine with air-cooled horizontal shaft design. The tractor uses a shaft-driven hydrostatic transmission with infinite forward and reverse speeds in two ranges. It has a wheelbase of 46 inches and is equipped with lawn/turf tires sized 16x6.50-8 front and 23x10.50-12 rear. The GT-16 offers two-wheel drive, manual steering, mechanical band brakes, and an open operator station with an optional vinyl weather cab. Attachments include a 50-inch mid-mount mower deck, 48-inch blade, and 42-inch two-stage front-mount snow blower. The tractor also features an independent front PTO with electric clutch and pulley type. It was built in Racine, Wisconsin, USA.
Power-
Founded-
ModelGT-16

Technical Specifications

Detailed specifications and technical data for Jacobsen GT-16

Engine
Typegasoline
ModelKohler K341AS
Coolingair-cooled horizontal-shaft
Cylinders1-cylinder
Fuel tank3 gal (11.4 L)
Rated RPM3600
Bore/Stroke3.75x3.25 inches (95 x 83 mm)
Displacement588 cc (35.89 ci)
Oil capacity2.25 qts (2.1 L)
Power (gross)16 hp (11.9 kW)
Starter volts12
Dimensions
Width40 inches (101 cm)
Height42 inches (106 cm)
Length71.7 inches (182 cm)
Rear tire23x10.50-12
Wheelbase46 inches (116 cm)
Front tire16x6.50-8
Clearance (rear axle)6.625 inches (16 cm)
Clearance (front axle)9.125 inches (23 cm)
Electrical
Groundnegative
Battery AH24
Battery volts12
Charging amps15
Mechanical
DriveTwo-wheel drive
BrakesMechanical band brakes
SteeringManual steering
Operator stationOpen operator station. Vinyl weather cab optional.
Production
SeriesGT Series
Built inRacine, Wisconsin, USA
CategoryGarden tractor
Years produced1973 - 1976
Attachments
NoteGarden tractors are capable of using tillers, plows, or other ground-engaging attachments.
48" Blademid-mount, 48 inches width (121 cm)
42" Snow blowertwo-stage, front-mount, 42 inches width (106 cm)
50" mid-mount mower deck3-blade with hydraulic lift, 50 inches (127 cm) cutting width
Transmission
Typeshaft-driven hydrostatic
Gearsinfinite forward and reverse (2-range)
Tractor hitch
Typesleeve hitch Optional
Rear Type0 Optional
Power Take-off (PTO)
Clutchelectric
Front PTOindependent
Front PTO Typepulley