John Deere industrial tractors
John Deere 210C
The John Deere 210C is an industrial tractor produced from 1986 to 1995. It features a John Deere 4-239D 3.9L 4-cylinder liquid-cooled diesel engine delivering 55 hp net and 58 hp gross. The tractor has a 4-speed power shuttle transmission with synchronized shifting between gears 3 and 4. It offers two- or four-wheel drive with inboard planetary final drives, power steering, and differential hydraulic wet disc brakes. The 210C includes a four-post FOPS/ROPS canopy for operator safety. Hydraulics are open center type with 2500 psi pressure and 24 gpm flow. Dimensions include an 83-inch wheelbase, 191-inch length, and operating weight of 8200 lbs. Tires vary with industrial front and rear options. Electrical system features a 12-volt battery and 51-amp alternator. Attachments include a front-end loader with a 4700 lbs lift capacity and 1.0 cubic yard bucket capacity.
Power-
Founded-
Model210C
Technical Specifications
Detailed specifications and technical data for John Deere 210C
Power
| Engine (net) | 55 hp (41.0 kW) |
|---|---|
| Engine (gross) | 58 hp (43.3 kW) |
Tires
| Industrial rear | 16.9-24, 14.9-24, 17.5L-24 |
|---|---|
| Industrial front | 7.50-16, 11L-15, 12.00-16.5 (4WD) |
Engine
| Type | diesel, 4-cylinder, liquid-cooled |
|---|---|
| Model | John Deere 4-239D |
| Torque | 158 lb-ft (214.2 Nm) |
| Starter | electric |
| Fuel tank | 26 gal (98.4 L) |
| Rated RPM | 2200 |
| Torque RPM | 1200 |
| Air cleaner | dry |
| Bore/Stroke | 4.19x4.33 inches (106 x 110 mm) |
| Compression | 17.8:1 |
| Power (net) | 55 hp (41.0 kW) |
| Displacement | 239 ci (3.9 L) |
| Oil capacity | 9 qts (8.5 L) |
| Power (gross) | 58 hp (43.3 kW) |
| Starter volts | 12 |
| Coolant capacity | 17 qts (16.1 L) |
Dimensions
| Length | 191 inches (485 cm) |
|---|---|
| Wheelbase | 83 inches (210 cm) |
| Height (ROPS) | 101.5 inches (257 cm) |
| Ground clearance | 12 inches (30 cm) |
| Height (exhaust) | 99 inches (251 cm) |
| Operating weight | 8200 lbs (3719 kg) |
Electrical
| Ground | negative |
|---|---|
| Battery volts | 12 |
| Charging amps | 51 |
| Charging system | alternator |
Hydraulics
| Type | open center |
|---|---|
| Pressure | 2500 psi (172.4 bar) |
| Total flow | 24 gpm (90.8 lpm) |
Mechanical
| ROPS | Four-post FOPS/ROPS canopy |
|---|---|
| Drive | Two- or four-wheel drive |
| Brakes | Differential hydraulic wet disc brakes |
| Final drives | inboard planetary |
| Power steering | yes |
Production
| Type | Industrial tractor |
|---|---|
| Manufacturer | John Deere |
| Years produced | 1986 - 1995 |
Attachments
| Dump time | 1.1s |
|---|---|
| Dump angle | 45° |
| Lower time | 2.8s |
| Raise time | 4.8s |
| Bucket width | 81 inches (205 cm) |
| Reach (dumped) | 29 inches (73 cm) |
| Rollback angle | 40° |
| Bucket capacity | 1.0 cu yd (0.8 cu m) |
| Height (at pin) | 128 inches (325 cm) |
| Front-end loader | yes |
| Boom rod diameter | 1.77 inches (4 cm) |
| Clearance (dumped) | 103 inches (261 cm) |
| Bucket rod diameter | 1.75 inches (4 cm) |
| Loader lift capacity | 4700 lbs (2131 kg) full at pin |
| Loader breakout force | 6800 lbs (3084 kg) bucket |
| Boom cylinder diameter | 2.76 inches (7 cm) |
| Bucket cylinder diameter | 2.76 inches (7 cm) |
Transmission
| Type | power shuttle |
|---|---|
| Gears | 4 forward and reverse |
| Notes | Synchronized shifting between gears 3 and 4 with power shuttle |
More John Deere industrial tractors models
View all John Deere industrial tractors modelsJohn Deere 1010 CrawlerModel1010 Crawler
John Deere 1010 Crawler LoaderModel1010
John Deere 1010 WheelModel1010
John Deere 110TLBModel110TLB
John Deere 2010 WheelModel2010 Wheel
John Deere 210KModel210K
John Deere 210K EPModel210K EP
John Deere 210LModel210L
John Deere 210L EPModel210L EP
John Deere 210LEModel210LE
John Deere 210LJModel210LJ
John Deere 244EModel244E