John Deere lawn tractors
John Deere E120
The John Deere E120 is a lawn tractor produced from 2018 to 2020 as part of the E100 Series. It features a 20 hp Briggs & Stratton 656cc 2-cylinder V-Twin gasoline engine, hydrostatic transmission with cruise control, and two-wheel drive. The tractor has a wheelbase of 48.9 inches and weighs 420 lbs. It includes a mid PTO with manual clutch and supports attachments such as a 42" mid-mount mower deck, snowblower, and blade. The E120 was built in Greeneville, Tennessee, USA, and originally sold for $1,899 in 2018.
Power12 hp
Founded38/46" deck
ModelE120
Technical Specifications
Detailed specifications and technical data for John Deere E120
Engine
| Type | air gasoline |
|---|---|
| Model | Briggs & Stratton 40N877 |
| Starter | electric |
| Cylinders | 2-cylinder |
| Fuel tank | 2.4 gal (9.1 L) |
| Bore/Stroke | 2.970x2.890 inches (75 x 73 mm) |
| Displacement | 656 cc (40.03 ci) |
| Oil capacity | 2.8 qts (2.6 L) |
| Configuration | vertical-shaft V-Twin |
| Power (gross) | 20 hp (14.9 kW) |
| Sparkplug gap | 0.030 inches (0.762 mm) |
| Starter volts | 12 |
Overview
| Series | E100 Series |
|---|---|
| Category | Lawn tractor |
| Original price | $1,899 in 2018 |
| Manufactured in | Greeneville, Tennessee, USA |
| Production years | 2018 - 2020 |
Dimensions
| Height | 44.5 inches (113 cm) |
|---|---|
| Length | 68.8 inches (174 cm) |
| Rear tire | 20x8-8 |
| Wheelbase | 48.9 inches (124 cm) |
| Front axle | Cast-iron |
| Front tire | 15x6-6 |
| Shipping weight | 420 lbs (190 kg) |
Electrical
| Ground | negative |
|---|---|
| Battery CCA | 300 |
| Battery volts | 12 |
| Charging amps | 9 |
Mechanical
| Drive | Two-wheel drive |
|---|---|
| Brakes | Wet disc brakes |
| Steering | Manual steering |
| Operator station | Open operator station |
Attachments
| Blade | 46 inches width (116 cm), front-mount |
|---|---|
| Snowblower | 44 inches width (111 cm), two-stage, front-mount |
| 42" mid-mount mower deck | 42 inches cutting width, mid-mount John Deere, 2-blade with manual lift, overall width 54.9 inches (139 cm), cut height 1 to 4 inch (2 to 10 cm), 13 cut positions |
Transmission
| Type | belt-driven hydrostatic |
|---|---|
| Gears | infinite forward and reverse |
| Model | Tuff Torq TL200 |
| Features | Hydrostatic transmission with cruise control |
| Oil change | sealed unit, owner service is not recommended |
Serial Numbers
| 2018 | J01001 |
|---|---|
| 2019 | K100001 |
| 2020 | L200001 |
| Serial number location | left side of the John Deere E120, under the fender by the rear wheel |
Power Take-off (PTO)
| Type | independent |
|---|---|
| Clutch | manual |
| Position | Mid PTO |