The John Deere X485 is a garden tractor produced from 2002 to 2005 as part of the HDGT X Series. It features a 25 hp Kawasaki 745cc 2-cylinder liquid-cooled V-Twin gasoline engine with fuel injection and a shaft-driven hydrostatic Tuff Torq K92 transmission with infinite forward and reverse speeds. The tractor is available in 2WD two-wheel steer and all-wheel steer variants, with optional upgrades such as upgraded seats, wheels, brush guards, and 4WD models. It has a wheelbase of 54.5 inches, weighs between 845 and 905 pounds depending on configuration, and offers a variety of attachments including mid-mount mower decks, snowblower, blade, and front-end loader. The X485 is designed with an open operator station and optional cabs, and features mechanical rear differential lock, hydrostatic power steering, and integral wet disc brakes.
John Deere X485garden tractorKawasaki enginehydrostatic transmissionlawn tractormower decksattachments
Steering:hydrostatic power, four-wheel steering on AWS
Operator station:Open operator station. Optional hard and soft-sided cabs. Optional vinyl weather enclosure.
Differential lock:mechanical rear
Production
Series:HDGT X Series
Built in:Horicon, Wisconsin, USA
Category:Garden tractor
Original price:$9,999 in 2002
Years produced:2002 - 2005
Attachments
Overview:48" mid-mount mower deck, 54" mid-mount mower deck, 62" mid-mount mower deck, snowblower, blade, front-end loader. The model 45 loader was not compatible with AWS tractors that had four-wheel steering. The X485 was compatible with a 42-inch (M04390X/M04391X) hydraulic tiller on the three-point hitch. The models 450 and 647 tillers required the three-point hitch and rear PTO.
45 Loader
Weight:515 lbs (233 kg)
Dump angle:45°
Bucket width:48 inches (121 cm)
Reach (dumped):23 inches (58 cm)
Reach (ground):43.3 inches (109 cm)
Bucket capacity:0.19 cu yd (0.1 cu m)
Height (at pin):73 inches (185 cm)
Clearance (dumped):57 inches (144 cm)
Breakout force (at pin):1,105 lbs (501 kg)
Breakout force (bucket):740 lbs (335 kg)
Breakout force (at 500mm):770 lbs (349 kg)
Lift capacity (full at pin):365 lbs (165 kg)
Rollback angle (ground line):25°
54" Blade
Cut:3.5 inches (8 cm)
Lift:11 inches (27 cm)
Angle:manual-angle, hydraulic-angle (optional)
Mount:front-mount
Width:54 inches (137 cm)
Height:50 inches (127 cm)
Lift type:hydraulic-lift
48" Mower deck
Lift:hydraulic lift
Model:John Deere 48C
Blades:3-blade
Weight:117 lbs (53 kg)
Cut height:1 to 4 inch (2 to 10 cm)
Total width:61.5 inches (156 cm)
Cutting width:48 inches (121 cm)
54" Mower deck
Lift:hydraulic lift
Model:John Deere 54C
Blades:3-blade
Weight:150 lbs (68 kg)
Cut height:1 to 4 inch (2 to 10 cm)
Total width:67.7 inches (171 cm)
Cutting width:54 inches (137 cm)
62" Mower deck
Lift:hydraulic lift
Model:John Deere 62C
Blades:3-blade
Weight:277 lbs (125 kg)
Total width:72.5 inches (184 cm)
Cutting width:62 inches (157 cm)
46" Snow blower
Lift:hydraulic-lift
Type:single-stage
Mount:front-mount
Width:46 inches (116 cm)
Weight:250 lbs (113 kg)
Total width:47.5 inches (120 cm)
Transmission
Type:shaft-driven hydrostatic
Gears:infinite forward and reverse
Model:Tuff Torq K92
Controls:Hydrostatic transmission operator with dual foot pedals. Cruise control on dashboard.