John Deere

John Deere 1830

The John Deere 1830 was a utility tractor produced from 1973 to 1979. It was built in Mannheim, Germany, and was essentially a model 2030 designated 1830 for export to Canada to avoid confusion with the Dubuque-built 2030. It features a 3.6L 4-cylinder diesel engine producing 68 hp, with options for 8-speed gear or 16-speed two-speed power shift transmissions. The tractor offers two- or four-wheel drive, hydraulic wet disc brakes, power steering, and an open operator station. It has a rear PTO with independent operation and optional 540/1000 RPM speeds. The 1830 supports a rear hitch with position control and draft sensing, and can be equipped with a 145 front-end loader attachment. Dimensions include a 2WD wheelbase of 85.8 inches and a weight of 5600 lbs.
Power68 hp
Founded1973 - 1979
Model1830

Technical Specifications

Detailed specifications and technical data for John Deere 1830

Power
Engine power68 hp (50.7 kW)
PTO (claimed)60 hp (44.7 kW)
Tires
Rear tire15.5-38, 16.9-30
Front tire7.50-16
Engine
Typediesel, 4-cylinder, liquid-cooled
ModelJohn Deere 3.6L 4-cyl diesel
Power68 hp (50.7 kW)
Torque163 lb-ft (221.0 Nm)
Starterelectric
Idle RPM650-2660
Fuel tank19.8 gal (74.9 L)
Rated RPM2500
Torque RPM1500
Air cleanerdry
Bore/Stroke4.02x4.33 inches (102 x 110 mm)
Compression16.8:1
Displacement219 ci (3.6 L)
Firing order1-3-4-2
Oil capacity9 qts (8.5 L)
Starter volts12
Coolant capacity12 qts (11.4 L)
Intake valve clearance0.015 inches (0.381 mm)
Exhaust valve clearance0.018 inches (0.457 mm)
Height
Hood60.2 inches (152 cm)
ROPS102.8 inches (261 cm)
Exhaust87.5 inches (222 cm)
145 Loader
Weight1150 lbs (521 kg)
Dump angle49°
Boom cylinder2.0 inches (5 cm)
Bucket widths60 inches (152 cm), 72 inches (182 cm), 84 inches (213 cm)
Breakout force3150 lbs (1428 kg)
Reach (dumped)21.5 inches (54 cm)
Bucket cylinder2.25 inches (5 cm)
Height (at pin)111 inches (281 cm)
Clearance (level)105.5 inches (267 cm)
Clearance (dumped)84 inches (213 cm)
Rollback (ground line)
Dimensions
Width76.4 inches (194 cm)
Length141.7 inches (359 cm)
Weight5600 lbs (2540 kg)
2WD Wheelbase85.8 inches (217 cm)
4WD Wheelbase84.6 inches (214 cm)
Electrical
Groundnegative
Batteries2
Battery volts12
Charging amps28
Charging systemalternator
Hydraulics
Typeclosed center
Pressure2250 psi (155.1 bar)
Mechanical
DriveTwo- or four-wheel drive
BrakesHydraulic wet disc brakes
Final drivesplanetary
Power steeringyes
Operator stationOpen
Differential lockmechanical rear
Production
TypeUtility tractor
NotesThe John Deere model 1830 was the designation for model 2030 tractors built in Mannheim that were exported to Canada. The name change to 1830 was done to avoid confusion with the model 2030 built in Dubuque.
Built inMannheim, Baden-Württemberg, Germany
Years made1973 - 1979
References
BooksTractors 40 to 80 hp published in 1978, by John Deere
ManualsOperator's Manual 145 Loader (OMW21474)
Attachments
Front-end loader145 Loader
Transmission
Typegear, two-speed power shift
Gears8 forward and 4 reverse (gear), 16 forward and 8 reverse (power shift)
Clutchdry disc
Options8-speed gear, 16-speed two-speed power shift
Tractor hitch
Controlposition control and lower-link draft sensing
Rear TypeII/I
Rear lift capacity3150 lbs (1428 kg)
Power Take-off (PTO)
Rear PTOindependent
Engine RPM540@2100, 1000@2100
Optional PTO540/1000 (1.375)
Rear PTO Type540 (1.375)
Serial Number Location
LocationSerial number plate on the right side of the tractor's frame, above the front axle.