Minneapolis-Moline lawn tractors

Minneapolis-Moline Town & Country 110

The Minneapolis-Moline Town & Country 110 is a garden tractor built by Jacobsen and distributed by Minneapolis-Moline from 1964 to 1971. It was built in Racine, Wisconsin, USA. It features a 10 hp Kohler K241S 390cc 1-cylinder air-cooled gasoline engine, with a 1.25 gallon fuel tank. The tractor offers two transmission options: a 3-speed belt-driven gear transmission with 3 forward and 1 reverse gear, and a belt-driven hydrostatic transmission with infinite forward and reverse speeds. It has a wheelbase of 42 inches, length of 61 inches, and width of 33 inches. The tractor rides on 4.80/4.00-8 front tires and 6.00-12 rear tires. Attachments include mid-mount mower decks in 36, 42, and 48 inch widths, a snowblower, blade, and front-end loader. The electrical system is 12 volts with negative ground.
Power10 hp
Founded36/42/48" deck
Model110

Technical Specifications

Detailed specifications and technical data for Minneapolis-Moline Town & Country 110

Engine
Typegasoline
ModelKohler K241S
Power10 hp (7.5 kW)
Coolingair-cooled
Cylinders1-cylinder
Fuel tank1.25 gal (4.7 L)
Rated RPM3600
Air cleanerdry
Bore/Stroke3.2515x2.875 inches (83 x 73 mm)
Displacement390 cc (23.85 ci)
Oil capacity2.5 qts (2.4 L)
Starter volts12
Dimensions
Width33 inches (83 cm)
Length61 inches (154 cm)
Rear tire6.00-12
Wheelbase42 inches (106 cm)
Front tire4.80/4.00-8
Hood height34.5 inches (87 cm)
Height (Seat)32 inches (81 cm)
Ground clearance11.75 inches (29 cm) (Clearance at frame)
Clearance (rear axle)7 inches (17 cm)
Steering wheel height38 inches (96 cm)
Clearance (front axle)8.75 inches (22 cm)
Electrical
Groundnegative
Battery volts12
Production
TypeGarden tractor
Built inRacine, Wisconsin, USA
DistributorMinneapolis-Moline
ManufacturerJacobsen
Years produced1964 - 1971
Attachments
NoteGarden tractors are capable of using tillers, plows, or other ground-engaging attachments.
Blade42 inches width (106 cm), front-mount
Snowblower36 inches width (91 cm), front-mount, manual-lift
Front-end loaderDanco Loader, 300 lbs lift (full at pin) (136 kg), 48 inches height (at pin) (121 cm)
36" mid-mount mower deck36 inches (91 cm)
42" mid-mount mower deck42 inches (106 cm)
48" mid-mount mower deck48 inches (121 cm)
Transmission
Options3-speed gear, hydrostatic
Type (gear)belt-driven gear
Gears (gear)3 forward and 1 reverse
Clutch (gear)idler pulley
Controls (gear)Clutch/brake, Throttle, Gear shift
Type (hydrostatic)belt-driven hydrostatic
Gears (hydrostatic)infinite forward and reverse
Controls (hydrostatic)Brake, Throttle, Forward/reverse, Parking brake