Oliver
Oliver 1950-T
The Oliver 1950-T is a row-crop tractor produced from 1967 to 1969 as part of the 50 Series by Oliver. It features a turbocharged Waukesha-Oliver 5.1L 6-cylinder diesel engine with an estimated 116.7 hp. Transmission options include 6-speed gear, 12-speed two-speed power shift, and 18-speed partial power shift. The tractor offers two- or four-wheel drive, hydraulic power steering, and differential disc brakes. It has an open operator station with an optional cab. The 1950-T includes open center hydraulics with 2050 psi pressure and 16.7 gpm pump flow. The rear hitch supports types II and III with position and lower-link draft control and a rear lift capacity of 6000 lbs. PTO options include 540 and 540/1000 rpm. Dimensions include a 109.1 inch wheelbase, 159.5 inch length, and 79.4 inch height at the steering wheel. Operating weight ranges from 10,460 lbs (2WD) to 11,490 lbs (4WD), with a ballasted weight of 20,220 lbs (4WD). Attachments include the 1810 Loader with a 2500 lbs lift capacity and 4500 lbs breakout force.
Power116 hp[P]
Founded1964 - 1967
Model1950-T
Technical Specifications
Detailed specifications and technical data for Oliver 1950-T
Power
| PTO (tested) | 105.24 hp (78.5 kW) |
|---|---|
| PTO (claimed) | 105 hp (78.3 kW) |
| Drawbar (tested) | 89.10 hp (66.4 kW) |
Engine
| Type | turbocharged diesel, 6-cylinder, liquid-cooled |
|---|---|
| Model | Waukesha-Oliver 5.1L 6-cyl diesel |
| Fuel tank | 27.5 gal (104.1 L), 78 gal (fender tanks) (295.2 L) |
| Rated RPM | 2400 |
| Air cleaner | dual dry pre-cleaners |
| Bore/Stroke | 3.875x4.375 inches (98 x 111 mm) |
| Compression | 16:1 |
| Displacement | 310 ci (5.1 L) |
| Oil capacity | 11.5 qts (10.9 L) |
| Starter volts | 12 |
| Coolant capacity | 20 qts (18.9 L) |
Weight
| Ballasted | 20,220 lbs (4WD) (9171 kg) |
|---|---|
| Operating | 10,460 lbs (2WD) (4744 kg), 11,490 lbs (4WD) (5211 kg) |
Dimensions
| Length | 159.5 inches (405 cm) |
|---|---|
| Wheelbase | 109.1 inches (277 cm) |
| Rear tread | 67 to 109 inches (170 to 276 cm) |
| Front tread | 67.5 to 91.6 inches (171 to 232 cm) |
| Ground clearance | 25.5 inches (64 cm) |
| Height (steering wheel) | 79.4 inches (201 cm) |
Hydraulics
| Type | open center |
|---|---|
| Pressure | 2050 psi (141.3 bar) |
| Pump flow | 16.7 gpm (63.2 lpm) |
Mechanical
| Drive | Two- or four-wheel drive |
|---|---|
| Brakes | Differential disc brakes |
| Steering | hydraulic power |
| Operator station | Open operator station. Optional cab. |
Production
| Type | Row-Crop tractor |
|---|---|
| Series | 50 Series |
| Years made | 1967 - 1969 |
Attachments
| Loader | 1810 Loader |
|---|---|
| Dump angle | 45° dump |
| Bucket width | 78 inches (198 cm) |
| Boom cylinder | 3 inches (7 cm) |
| Lift capacity | 2500 lbs lift (full at pin) (1134 kg) |
| Breakout force | 4500 lbs breakout (2041 kg) |
| Reach (dumped) | 36 inches (91 cm) |
| Reach (ground) | 87 inches (220 cm) |
| Height (at pin) | 168 inches (426 cm) |
| Clearance (dumped) | 140 inches (355 cm) |
| Rollback (ground line) | 8° rollback |
Transmission
| Options | 6-speed gear, 12-speed two-speed power shift, 18-speed partial power shift |
|---|---|
| 6-speed gear | Typegear Gears6 forward and 2 reverse Clutch330mm cera-metallic disc |
| 18-speed partial power shift | NameHydraul-Shift Typepartial power shift Gears18 forward and 6 reverse Clutch330mm cera-metallic disc DescriptionThe Hydraul-Shift provides an on-the-move power shift to a higher or lower range for each of the six forward, and two reverse, gears. |
| 12-speed two-speed power shift | NameHydra-Power Typetwo-speed power shift Gears12 forward and 6 reverse Clutch330mm cera-metallic disc |
Tractor hitch
| Control | position and lower-link draft control |
|---|---|
| Rear Type | II, III |
| Rear lift (at ends) | 6000 lbs (2721 kg) |
Power Take-off (PTO)
| Rear PTO Type | 540, 540/1000 |
|---|