Sabre lawn tractors
Sabre 1842HV
The Sabre 1842HV is a lawn tractor produced in 1998 by Sabre, a part of John Deere, built in Horicon, Wisconsin, USA. It features an 18 hp Briggs & Stratton 568cc 2-cylinder gasoline engine with a belt-driven hydrostatic transmission (Tuff Torq K61). The tractor has a wheelbase of 48.5 inches, weighs 530 lbs, and uses two-wheel drive with manual steering. It includes a mid PTO with an electric clutch and a 3-gallon fuel tank. Attachments available include a 42" mid-mount mower deck, snowblower, and blade. Electrical system includes a 12-volt battery with 340 CCA and a flywheel alternator charging system.
Power-
Founded-
Model1842HV
Technical Specifications
Detailed specifications and technical data for Sabre 1842HV
Power
| Power (gross) | 18 hp (13.4 kW) |
|---|
Tires
| Rear tire | 23x9.50-12 |
|---|---|
| Front tire | 16x6.50-8 |
Engine
| Type | gasoline |
|---|---|
| Model | Briggs & Stratton 350777 |
| Cooling | air-cooled vertical-shaft V-Twin |
| Starter | electric |
| Idle RPM | 1550-3350 |
| Cylinders | 2-cylinder |
| Air cleaner | dry with foam precleaner |
| Displacement | 568 cc (34.7 ci) |
| Power (gross) | 18 hp (13.4 kW) |
| Starter volts | 12 |
Dimensions
| Width | 37.6 inches (95 cm) |
|---|---|
| Height | 44.1 inches (112 cm) |
| Length | 71.5 inches (181 cm) |
| Weight | 530 lbs (240 kg) |
| Wheelbase | 48.5 inches (123 cm) |
Electrical
| Ground | negative |
|---|---|
| Battery CCA | 340 |
| Battery Group | BCI U1 |
| Battery volts | 12 |
| Charging amps | 16 |
| Charging system | flywheel alternator |
Mechanical
| Drive | Two-wheel drive |
|---|---|
| Steering | Manual steering |
| Operator station | Open operator station |
Production
| Type | Lawn tractor |
|---|---|
| Built in | Horicon, Wisconsin, USA |
| Manufacturer | Sabre (a part of John Deere) |
Attachments
| Overview | 42" mid-mount mower deck, snowblower, blade |
|---|---|
| 46" Blade | Sabre, front-mount, 46 inches width (116 cm), manual-lift |
| 42" Mower deck | mid-mount Sabre, 2-blade with manual lift, Cutting width 42 inches (106 cm), Cut height 1 to 4 inch (2 to 10 cm) |
| 42" Snow blower | Sabre, 42 inches width (106 cm), front-mount, manual-lift |
Transmission
| Note | According to the Deere parts manual, both the K61 and K62C were used in the Sabre 1842HV. |
|---|---|
| Type | belt-driven hydrostatic |
| Gears | infinite forward and reverse |
| Oil capacity | 3.4 qts (3.2 L) |
| Transmission | Tuff Torq K61 |
Power Take-off (PTO)
| Clutch | electric |
|---|---|
| Mid PTO | independent |