Yanmar industrial tractors

Yanmar Sc2450

The Yanmar Sc2450 is a compact backhoe loader tractor produced from 2009 to 2011. It features a 0.9L 3-cylinder liquid-cooled diesel engine producing 24 hp gross, with a hydrostatic transmission offering infinite forward and reverse speeds in two ranges. The tractor has four-wheel drive, hydraulic power steering, and wet disc brakes. It includes a CL100 front-end loader with a 700 lbs lift capacity at full pin height and a Yanmar backhoe with a digging depth of 76.5 inches. The tractor weighs 2,525 lbs and has a wheelbase of 55.1 inches. It is equipped with 18x8.5-10 front tires and 26x12.0-12 rear tires. The PTO is independent with rear and mid PTO options. Hydraulics are open center with a total flow of 6.9 gpm. Electrical system is 12 volts with negative ground.
Power-
Founded-
ModelSc2450

Technical Specifications

Detailed specifications and technical data for Yanmar Sc2450

Power
PTO (claimed)16.5 hp (12.3 kW)
Engine (gross)24 hp (17.9 kW)
Tires
Rear tire26x12.0-12
Front tire18x8.5-10
Engine
ModelYanmar 0.9L 3-cyl diesel
Coolingliquid-cooled
Starterelectric
Cylinders3-cylinder
Fuel tank5.8 gal (22.0 L)
Rated RPM3200
Air cleanerdry
Bore/Stroke2.835x2.913 inches (72 x 74 mm)
Fuel systemindirect injection
Pre-heatingglow plugs
Displacement55.1 ci (0.9 L)
Oil capacity2.5 qts (2.4 L)
Starter volts12
Coolant capacity3.4 qts (3.2 L)
Variants
Sc2400compact tractor
Sc2450compact backhoe
Dimensions
Width44.5 inches (113 cm)
Length172.5 inches (loader and backhoe) (438 cm)
Wheelbase55.1 inches (139 cm)
Ground clearance7.5 inches (19 cm)
Operating weight2,525 lbs (1145 kg)
Electrical
Groundnegative
Battery volts12
Hydraulics
Typeopen center
Pump flow3.5 gpm (13.2 lpm)
Total flow6.9 gpm (26.1 lpm)
Trans/PTO flow3.4 gpm (12.9 lpm)
Mechanical
BrakesWet disc brakes
Steeringhydraulic power
Production
TypeBackhoe loader tractor
Years made2009 - 2011
ManufacturerYanmar
References
PublicationSc2450 Multi-purpose Sub-compact Tractor published in 2012, by Yanmar
Attachments
Backhoe typeYanmar Backhoe
Backhoe weight620 lbs (without bucket) (281 kg)
Front-end loaderCL100 Loader
Loader dump time1.5s
Backhoe swing arc150°
Loader dump angle45°
Loader lower time2.5s
Loader raise time3.5s
Loader bucket width48 inches (121 cm)
Backhoe bucket force2,036 lbs (923 kg)
Backhoe bucket width8 inches (20 cm) and 12 inches (30 cm)
Loader rollback time2s
Backhoe digging depth76.5 inches (194 cm)
Loader reach (dumped)27 inches (68 cm)
Loader reach (ground)40 inches (101 cm)
Loader rollback angle25°
Backhoe loading height60 inches (152 cm)
Loader height (at pin)71 inches (180 cm)
Backhoe bucket rotation180°
Backhoe reach from pivot104 inches (264 cm)
Backhoe dipperstick force1,187 lbs (538 kg)
Loader clearance (dumped)54 inches (137 cm)
Loader breakout force (at pin)1,350 lbs (612 kg)
Loader breakout force (at 500mm)1,050 lbs (476 kg)
Backhoe 2-Foot flat digging depth74.5 inches (189 cm)
Loader lift capacity (full at pin)700 lbs (317 kg)
Loader lift capacity (full at 500mm)550 lbs (249 kg)
Transmission
Typehydrostatic
Gearsinfinite forward and reverse (2-range)
DescriptionFoot-pedal controlled hydrostatic transmission with cruise control two Shift-On-The-Go ranges.
Oil capacity8 qts (7.6 L)
Tractor hitch
Controlposition control
Rear Type1 (limited)
Rear lift (at 24"/610mm)661 lbs (299 kg)
Power Take-off (PTO)
Mid PTOindependent
Rear PTOindependent
Mid PTO Type2100
Rear PTO Type540
Mid PTO Engine RPM2100@3338
Rear PTO Engine RPM540@31111