Zetor

Zetor 4341

The Zetor 4341 is a utility tractor produced from 1997 to 2004 as part of the Range 1 Super Series. Built in Brno, Czech Republic, it features a 3.9L 4-cylinder diesel engine producing 59 hp (44.0 kW) with a 10-speed synchro/mech shuttle transmission. It has four-wheel drive, power steering, hydraulic wet disc brakes, and a two-post folding ROPS with an optional cab with air-conditioning. The tractor has a wheelbase of 73 inches (185 cm), length of 141 inches (358 cm), width of 73 inches (185 cm), and a cab height of 102 inches (259 cm). It weighs 7570 lbs (3433 kg). The hydraulic system is open center with 2600 psi (179.3 bar) pressure and 14 gpm (53.0 lpm) pump flow. The rear hitch is type II/I with position and draft control and a lift capacity of 6830 lbs (3098 kg). The PTO is independent with a 540 rpm rear PTO. Electrical system includes a 12-volt battery and 75 amp alternator. Attachments include front-end loaders such as the 102H, 102SLX, and 112SLX loaders with various lift and breakout capacities.
Power59 hp
Founded1997 - 2004
Model4341

Technical Specifications

Detailed specifications and technical data for Zetor 4341

Power
Engine power59 hp (44.0 kW)
PTO (claimed)56 hp (41.8 kW)
Engine
Typediesel, 4-cylinder, liquid-cooled
ModelZetor 3.9L 4-cyl diesel
Power59 hp (44.0 kW)
Starterelectric
Fuel tank32 gal (121.1 L)
Rated RPM2200
Bore/Stroke4.016x4.724 inches (102 x 120 mm)
Displacement239 ci (3.9 L)
Starter volts12
Dimensions
Width73 inches (185 cm)
Length141 inches (358 cm)
Weight7570 lbs (3433 kg)
Rear tire16.9-28
Wheelbase73 inches (185 cm)
Front tire11.2-24
Height (cab)102 inches (259 cm)
Rear tire (with cab)16.9-30
Electrical
Battery volts12
Charging amps75
Charging systemalternator
Hydraulics
Typeopen center
Valves1 to 3
Pressure2600 psi (179.3 bar)
Pump flow14 gpm (53.0 lpm)
Steering flow4 gpm (15.1 lpm)
Mechanical
ROPSTwo-post folding ROPS. Cab optional with air-conditioning.
DriveFour-wheel drive
BrakesHydraulic wet disc brakes
SteeringPower steering
Production
TypeUtility tractor
SeriesRange 1 Super Series
Built inBrno, Czech Republic
Original price$27,000
Years produced1997 - 2004
Attachments
Loadersfront-end loader
102H Loader3930 lbs lift (full at pin) (1782 kg), 2030 lbs lift (full at 800mm) (920 kg), 5320 lbs breakout (at pin) (2413 kg), 2860 lbs breakout (at 800mm) (1297 kg), 40° dump, 38 inches reach (dumped) (96 cm), 73 inches reach (ground) (185 cm), 20° rollback, 122 inches height (at pin) (309 cm), 98 inches clearance (dumped) (248 cm), raise: 4s, dump: 4s, rollback: 3.5s, weight: 2100 lbs (952 kg), Bucket width: 73 inches (185 cm)
102SLX Loader4670 lbs lift (full at pin) (2118 kg), 2500 lbs lift (full at 800mm) (1134 kg), 5960 lbs breakout (at pin) (2703 kg), 4280 lbs breakout (at 800mm) (1941 kg), 60° dump, 20 inches reach (dumped) (50 cm), 83 inches reach (ground) (210 cm), 40° rollback, 127 inches height (at pin) (322 cm), 91 inches clearance (dumped) (231 cm), raise: 5.2s, dump: 2.5s, rollback: 2s, weight: 2300 lbs (1043 kg), Bucket width: 73 inches (185 cm)
112SLX Loader3270 lbs lift (full at pin) (1483 kg), 2120 lbs lift (full at 800mm) (961 kg), 5180 lbs breakout (at pin) (2349 kg), 3590 lbs breakout (at 800mm) (1628 kg), 60° dump, 34 inches reach (dumped) (86 cm), 90 inches reach (ground) (228 cm), 40° rollback, 136 inches height (at pin) (345 cm), 96 inches clearance (dumped) (243 cm), raise: 5.6s, dump: 2.5s, rollback: 2s, weight: 2450 lbs (1111 kg), Bucket width: 73 inches (185 cm)
Transmission
Typesynchro, mech shuttle
Gears10 forward and 2 reverse
Clutchhydraulic 304.8mm cerametallic disc
Tractor hitch
Controlposition and draft control
Rear TypeII/I
Rear lift6830 lbs (3098 kg)
Power Take-off (PTO)
Rear PTOindependent
Rear PTO Type540