Challenger
Challenger MT295
The Challenger MT295 is a compact utility tractor produced from 2003 to 2005 by Challenger, a part of AGCO, and built by Iseki in Matsuyama, Japan. It features a 2.2L 4-cylinder liquid-cooled diesel engine producing 44.2 hp gross, with transmission options including a 16-speed power shuttle and hydrostatic. The tractor offers four-wheel drive, mechanical rear differential lock, power steering, wet disc brakes, and a two-post folding ROPS. It has an open center hydraulic system with 2275 psi pressure and a 12.6 gpm total flow. The MT295 supports rear and optional mid PTOs, and has a rear I-type hitch with position and draft control. Dimensions include a 76-inch wheelbase, 140.9-inch length, and weights ranging from 4277 to 4331 pounds. Attachments include front-end loaders and backhoes, with detailed specifications for the ML40 loader and MH20 backhoe. The tractor is related to models MT295B, MT285, and MT297.
Power44 hp
Founded2003 - 2005
ModelMT295
Technical Specifications
Detailed specifications and technical data for Challenger MT295
Power
| Engine (gross) | 44.2 hp (33.0 kW) |
|---|---|
| Gear PTO (claimed) | 37.0 hp (27.6 kW) |
| Hydro PTO (claimed) | 36 hp (26.8 kW) |
Engine
| Type | diesel |
|---|---|
| Cooling | liquid-cooled |
| Starter | electric |
| Cylinders | 4-cylinder |
| Fuel tank | 12.7 gal (48.1 L) |
| Rated RPM | 2500 |
| Bore/Stroke | 3.43x3.64 inches (87 x 92 mm) |
| Displacement | 134.1 ci (2.2 L) |
| Manufacturer | Iseki |
| Power (gross) | 44.2 hp (33.0 kW) |
| Starter volts | 12 |
Variants
| 1445 | similar Massey Ferguson model |
|---|
Electrical
| Ground | negative |
|---|---|
| Battery volts | 12 |
| Charging system | alternator |
Hydraulics
| Type | open center |
|---|---|
| Pressure | 2275 psi (156.9 bar) |
| Pump flow | 7.4 gpm (28.0 lpm) |
| Total flow | 12.6 gpm (47.7 lpm) |
| Steering flow | 5.2 gpm (19.7 lpm) |
Mechanical
| ROPS | Two-post folding ROPS |
|---|---|
| Drive | Four-wheel drive |
| Brakes | Wet disc brakes |
| Power steering | Yes |
| Differential lock | mechanical rear |
Production
| Type | Compact Utility tractor |
|---|---|
| Built in | Matsuyama, Japan |
| Distributor | Challenger (a part of AGCO) |
| Manufacturer | Iseki |
| Years produced | 2003 - 2005 |
Attachments
| Backhoe | Yes |
|---|---|
| ML40 Loader | 1600 lbs lift (full at 500mm) (725 kg), 43° dump, 37 inches reach (dumped) (93 cm), 15° rollback, 99.75 inches height (at pin) (253 cm), 80.5 inches clearance (dumped) (204 cm) |
| Front-end loader | Yes |
| Challenger MH20 Backhoe | Transport height 72.8 inches (184 cm), Bucket widths 10 inches (25 cm), 12 inches (30 cm), 16 inches (40 cm), 24 inches (60 cm), 37 inches (93 cm), 2-Foot flat digging depth 96 inches (243 cm), Reach from pivot 112.2 inches (284 cm), Bucket Rotation 165°, Swing Arc 180° |
Transmission
| Options | 16-speed power shuttle, hydrostatic |
|---|---|
| Hydrostatic | infinite forward and reverse (4-range) |
| Power shuttle | 16 forward and reverse gears, four synchronized gears (1-4) in four ranges with power shuttle |
Tractor hitch
| Control | position and draft control |
|---|---|
| Rear Type | I |
| Rear lift (at ends) | 3086 lbs (1399 kg) |
| Rear lift (at 24"/610mm) | 2600 lbs (1179 kg) |
Dimensions & Tires
| Width | 71.5 inches (181 cm) |
|---|---|
| Length | 140.9 inches (357 cm) |
| Wheelbase | 76 inches (193 cm) |
| Rear tread | 52 to 60 inches (132 to 152 cm) |
| Front tread | 52.5 inches (133 cm) |
| Gear Weight | 4277 lbs (1940 kg) |
| Hydro Weight | 4331 lbs (1964 kg) |
| Height (ROPS) | 95.9 inches (243 cm) |
| Lawn/turf rear | 475/65D-20, 570-648 |
| Industrial rear | 17.5-24 |
| Lawn/turf front | 29x12.00-15, 27x12LL-15 |
| Industrial front | 10-16.5 |
| Standard tires (ag) | Front: 9.5-16. Rear: 13.6-28 |
| Height (Folded ROPS) | 72.7 inches (184 cm) |
Power Take-off (PTO)
| Clutch | wet disc |
|---|---|
| Mid PTO | independent (Optional, available only with hydrostatic transmission.) |
| Rear PTO | independent |
| Mid PTO Type | 2000 |
| Rear PTO Type | 540 (1.375) |