Tractorpedia.com

Cub Cadet 127

The Cub Cadet 127 is a garden tractor produced from 1969 to 1971 by Cub Cadet, a part of International Harvester. It features a 12 hp Kohler 476cc 1-cylinder air-cooled gasoline engine, hydrostatic transmission with infinite forward and reverse speeds, and two-wheel drive with manual steering. The tractor has mechanical disc brakes and an open operator station with a padded seat. It was built in Louisville, Kentucky, USA. The 127 model supports various attachments including mid-mount mower decks (38", 42", 48"), snowblowers, blades, and front-end loaders. It has a wheelbase of 43 inches, weighs 650 lbs, and uses lawn/turf tires sized 4.80/4.00-8 front and 23x8.50-12 rear. Electrical system includes a 12-volt battery with a generator charging system. The tractor hitch is a Cub Cadet three-point optional type. The PTO clutch is a mechanical dry disc type with a front PTO speed of 3600 rpm.
Cub Cadet 127garden tractorKohler K301A enginehydrostatic transmissionmower deckssnowblowerfront-end loadertractor specifications
Power12 hp
Founded38/42/48" deck
Model127

Technical Specifications

Detailed specifications and technical data for Cub Cadet 127

Engine

Type:gasoline
Model:Kohler K301A
Power:12 hp (8.9 kW)
Torque:19.6 lb-ft (26.6 Nm)
Cooling:air-cooled
Idle RPM:1000-3800
Cylinders:1-cylinder
Fuel tank:2 gal (7.6 L)
Point gap:0.020 inches (0.508 mm)
Rated RPM:3600
Sparkplug:Champion H-10
Torque RPM:2200
Bore/Stroke:3.385x3.25 inches (86 x 83 mm)
Compression:6:1
Displacement:476 cc (29.07 ci)
Oil capacity:1.5 qts (1.4 L)
Sparkplug gap:0.025 inches (0.635 mm)
Starter volts:12
Intake valve clearance:0.010 inches (cold) (0.254 mm)
Exhaust valve clearance:0.020 inches (cold) (0.508 mm)

Electrical

Ground:negative
Battery volts:12
Charging amps:15
Charging system:generator

Mechanical

Drive:Two-wheel drive
Brakes:Mechanical disc brakes
Steering:manual
Operator station:Open operator station with padded seat

Production

Series:1X6/1X7 Series
Built in:Louisville, Kentucky, USA
Category:Garden tractor
Years made:1969 - 1971

Attachments

42" Blade:front-mount, 42 inches width (106 cm), 16 inches height (40 cm)
36" Snow blower:Cub Cadet QA-36, 36 inches width (91 cm), two-stage, front-mount, 170 lbs (77 kg)
42" Snow blower:Cub Cadet QA-42, 42 inches width (106 cm), two-stage, front-mount, 180 lbs (81 kg)
Johnson 10TC Loader:350 lbs lift (full at pin) (158 kg), 47° dump, 16 inches reach (dumped) (40 cm), 69.5 inches height (at pin) (176 cm), 54 inches clearance (dumped) (137 cm), 67 inches clearance (level) (170 cm), weight: 410 lbs (185 kg), Bucket width: 38 inches (96 cm) and 48 inches (121 cm)
38" mid-mount mower deck:38 inches (96 cm), manual lift, electric optional lift, Cut height: 1 to 4 inch (2 to 10 cm)
42" mid-mount mower deck:42 inches (106 cm), manual lift, electric optional lift, Cut height: 1 to 4 inch (2 to 10 cm)
48" mid-mount mower deck:48 inches (121 cm), manual lift, electric optional lift, Cut height: 1 to 4 inch (2 to 10 cm)

Transmission

Type:hydrostatic
Gears:infinite forward and reverse
Controls:Brake, Forward/reverse, Throttle
Oil type:IH Hy-Tran
Oil capacity:7 qts (6.6 L)

Tractor hitch

Type:Cub Cadet three-point Optional

Serial Numbers

1969:307000
1970:322858
1971:373301
Final:400000
Serial number plate location:left side of the tractor's rear axle

Dimensions & Tires

Width:36 inches (91 cm)
Length:64 inches (162 cm)
Rear tire:23x8.50-12
Wheelbase:43 inches (109 cm)
Front axle:Cast-iron
Front tire:4.80/4.00-8
Rear tread:27 inches (68 cm)
Front tread:27 inches (68 cm)
Shipping weight:650 lbs (294 kg)
Flange rear axle:-
Ground clearance:6 inches (15 cm)
Height (steering wheel):39.75 inches (100 cm)

Power Take-off (PTO)

Clutch:mechanical dry disc
Front PTO Type:3600