Cub Cadet ZTT 46
The Cub Cadet ZTT 46 is a zero-turn mower produced from 2010 to 2011 as part of the iSeries Series. It features a 20 hp Kohler SV710 2-cylinder gasoline engine with a 725 cc displacement and an air-cooled vertical-shaft V-Twin design. The mower has a hydrostatic transmission (Hydro-Gear EZT) with infinite forward and reverse speeds. It has a wheelbase of 47.5 inches, weighs 535 lbs, and rides on 15x6 front and 20x8 rear lawn/turf tires. The ZTT 46 includes a 46-inch mid-mount mower deck with 6 cut positions and a cut height range of 1.25 to 3.75 inches. Additional attachments include a 42-inch front-mount snowblower and a 46-inch front-mount blade. The mower has a two-wheel drive with differential steering and an open operator station. Electrical system features a 12-volt battery with 235 CCA and a 15 amp flywheel alternator charging system. The original price was approximately $3,000 in 2008.
Power-
Founded-
ModelZTT 46
Technical Specifications
Detailed specifications and technical data for Cub Cadet ZTT 46
Engine
| Type | gasoline |
|---|---|
| Model | Kohler SV710 |
| Cooling | air-cooled vertical-shaft V-Twin |
| Starter | electric |
| Cylinders | 2-cylinder |
| Fuel tank | 2.8 gal (10.6 L) |
| Bore/Stroke | 3.27x2.64 inches (83 x 67 mm) |
| Displacement | 725 cc (44.24 ci) |
| Oil capacity | 1.6 qts (1.5 L) |
| Power (gross) | 20 hp (14.9 kW) |
| Starter volts | 12 |
Dimensions
| Length | 69 inches (175 cm) |
|---|---|
| Weight | 535 lbs (242 kg) |
| Rear tire | 20x8 |
| Wheelbase | 47.5 inches (120 cm) |
| Front tire | 15x6 |
Electrical
| Ground | negative |
|---|---|
| Battery CCA | 235 |
| Battery volts | 12 |
| Charging amps | 15 |
| Charging system | flywheel alternator |
Mechanical
| Drive | Two-wheel drive |
|---|---|
| Steering | differential |
| Operator station | Open operator station |
Production
| Type | Zero-turn mower |
|---|---|
| Series | iSeries Series |
| Original price | $3,000 in 2008 |
| Years produced | 2010 - 2011 |
Attachments
| Blade | 46 inches width (116 cm), front-mount |
|---|---|
| Cut height | 1.25 to 3.75 inch (3 to 9 cm) |
| Snowblower | 42 inches width (106 cm), front-mount |
| Cut positions | 6 |
| Cutting width | 46 inches (116 cm) |
| 46" mid-mount mower deck | 2-blade with manual with spring assist lift |
Transmission
| Type | belt-driven hydrostatic |
|---|---|
| Gears | infinite forward and reverse |
| Model | Hydro-Gear EZT |
| Oil change | sealed unit, owner service is not recommended |
Power Take-off (PTO)
| PTO | independent |
|---|---|
| Type | Mid PTO |
| Clutch | electric |
