Ford industrial tractors

Ford 420

The Ford 420 is an industrial tractor produced from 1975 to 1978. It features options for a 3.0L 3-cylinder diesel engine or a 2.9L 3-cylinder gasoline engine, with power outputs ranging from 44 hp to 51.7 hp gross. The tractor offers multiple transmission options including 6-speed gear, 4-speed torque converter, and 8-speed gear transmissions. It has a wheelbase of 81.1 inches and various tire sizes for industrial use. The tractor includes power steering, mechanical wet disc brakes, and optional ROPS/FOPS. Hydraulics provide 2200 psi pressure with pump flows for transmission and independent PTOs. The rear hitch and PTO have optional configurations. Electrical system includes a 12-volt battery with alternator charging. Attachments include a front-end loader with detailed lift and breakout capacities and bucket dimensions.
Power-
Founded-
Model420

Technical Specifications

Detailed specifications and technical data for Ford 420

Power
Engine (net)47.6 hp (35.5 kW)
Engine (gross)51.7 hp (38.6 kW)
Tires
Industrial rear14.9-24, 16.9-24
Industrial front7.50-16, 9.00-16
Engine
OptionsFord 3.0L 3-cyl diesel, Ford 2.9L 3-cyl gasoline
Fuel tank16 gal (60.6 L)
Diesel engine3-cylinder, liquid-cooled, 183 ci (3.0 L), Bore/Stroke 4.2x4.4 inches (107 x 112 mm), Power (net) 47.6 hp (35.5 kW), Power (gross) 51.7 hp (38.6 kW), Fuel system direct injection, Air cleaner dry, Compression 16.3:1, Rated RPM 2200, Starter electric, Starter volts 12, Oil capacity 7 qts (6.6 L), Coolant capacity 11 qts (10.4 L)
Gasoline engine3-cylinder, liquid-cooled, 175 ci (2.9 L), Bore/Stroke 4.2x4.2 inches (107 x 107 mm), Power (net) 44 hp (32.8 kW), Power (gross) 46 hp (34.3 kW), Air cleaner dry, Compression 7.75:1, Rated RPM 2100, Starter electric, Starter volts 12
Dimensions
Length192 inches (487 cm)
Wheelbase81.1 inches (205 cm)
Rear tread60 inches (152 cm)
Front tread56 inches (142 cm)
Height (exhaust)81 inches (205 cm)
Clearance (front axle)11.6 inches (29 cm)
Electrical
Groundnegative
Battery AH128 (diesel), 80 (gasoline)
Battery volts12
Charging amps32, 51 (optional)
Charging systemalternator
Hydraulics
Pressure2200 psi (151.7 bar)
Pump flow5.3 gpm (transmission PTO) (20.1 lpm), 8.3 gpm (independent PTO) (31.4 lpm)
Mechanical
ROPSTwo-post ROPS. Four-post FOPS optional.
DriveTwo-wheel drive
BrakesMechanical wet disc brakes
Steeringpower assist
Final drivesinboard planetary
Production
TypeIndustrial tractor
ManufacturerFord
Years produced1975 - 1978
References
Manuals231 335 420 515 531 532 535 Operator's Manual (SE 3503) published in 1975, Buyer's Guide published in 1976, by Ford
Attachments
front-end loader3050 lbs lift (full at pin) (1383 kg), 4800 lbs breakout (at pin) (2177 kg), 44.3° dump, 26.5 inches reach (dumped) (67 cm), 22° rollback (ground line), 100° rollback (raised), 26° rollback (at carry), 127.25 inches height (at pin) (323 cm), 102 inches clearance (dumped) (259 cm), Bucket width: 84.5 inches (light material) (214 cm), Bucket width: 66.6 inches (169 cm)
Transmission
Options6-speed gear, 4-speed torque converter, 8-speed gear
6-speed gearType gear, 6 forward and 4 reverse, Three gears forward and two reverse in high and low ranges
8-speed gearType gear, 8 forward and 2 reverse
4-speed torque converterType torque converter, 4 forward and reverse, Power reversing transmission with torque converter
Tractor hitch
Controlposition and draft control
Rear TypeI Optional
Power Take-off (PTO)
Rear PTOtransmission Optional, independent Optional
Rear PTO Type540