Ford industrial tractors

Ford 450

The Ford 450 is a backhoe loader tractor produced from 1987 to 1988. It features a Ford 3.1L 3-cylinder diesel engine delivering 50 hp net power and 52 hp gross power. The tractor has a 4-speed torque converter transmission with synchronized shifts. It is equipped with two-wheel drive, mechanical wet disc brakes, power steering, and a four-post ROPS. The hydraulic system is open center with separate capacities for loader and backhoe. The front-end loader can lift 3500 lbs and has a breakout force of 6000 lbs, while the backhoe bucket force is 9735 lbs. The tractor weighs 11553 lbs and rides on industrial tires sized 11.00L-16 front and 16.9-24 rear.
Power-
Founded-
Model450

Technical Specifications

Detailed specifications and technical data for Ford 450

Power
Engine (net)50 hp (37.3 kW)
PTO (claimed)44 hp (32.8 kW)
Engine (gross)52 hp (38.8 kW)
Tires
Rear tire16.9-24
Front tire11.00L-16
Engine
Typediesel, 3-cylinder, liquid-cooled
ModelFord 3.1L 3-cyl diesel
Torque136 lb-ft (184.4 Nm)
Rated RPM2200
Torque RPM1400
Bore/Stroke4.4x4.2 inches (112 x 107 mm)
Compression16.3:1
Power (net)50 hp (37.3 kW)
Pre-heatingthermostart
Displacement192 ci (3.1 L)
Oil capacity7 qts (6.6 L)
Starter typeelectric
Power (gross)52 hp (38.8 kW)
Coolant capacity11 qts (10.4 L)
Capacity
Fuel16 gal (60.6 L)
Steering1.25 qts (1.2 L)
Hydraulic system8.7 gal (loader) (32.9 L), 22 gal (backhoe) (83.3 L)
Dimensions
Weight11553 lbs (5240 kg)
Rear tread61 inches (154 cm)
Max rear axle11500 lbs (5216 kg)
Max front axle10000 lbs (4536 kg)
Hydraulics
Typeopen center
Capacity8.7 gal (loader) (32.9 L), 22 gal (backhoe) (83.3 L)
Pump flow21.9 gpm (82.9 lpm)
Steering flow5.9 gpm (22.3 lpm)
Steering capacity1.25 qts (1.2 L)
Mechanical
ROPSFour-post ROPS
DriveTwo-wheel drive
BrakesMechanical wet disc brakes
Final drivesinboard planetary
Power steeringyes
Differential lockmechanical rear
Production
TypeBackhoe loader tractor
ManufacturerFord
Years produced1987 - 1988
Attachments
BackhoeFord Backhoe, Bucket force: 9735 lbs (4415 kg)
Front-end loader3500 lbs lift (full at pin) (1587 kg), 6000 lbs breakout (2721 kg), raise: 5.1s, dump: 2.3s, lower: 2.1s, Bucket width: 81 inches (205 cm)
Transmission
Typetorque converter
Gears4 forward and reverse
NotesSynchronized up-shifts in gears 2, 3, and 4. Synchronized down-shift from 4-to-3.
Oil capacity19 qts (18.0 L)