International Harvester

International Harvester 1256

The International Harvester 1256 is a standard-tread tractor produced from 1967 to 1969. It was built in Rock Island, Illinois, USA, and originally priced at $10,700 in 1969. The tractor features a turbocharged 6-cylinder 6.7L diesel engine, with a power output of approximately 111.6 to 125.6 hp (estimated). It offers two transmission options: an 8-speed gear and a 16-speed partial power shift with Torque Amplifier. The 1256 supports two- or four-wheel drive, power steering, and independent hydraulic dry disc brakes. The operator station is open, with optional two-post ROPS or cab with heat and air-conditioning. Hydraulics are open center with 1 valve and 8 gpm pump flow. The tractor hitch is category III/II with an independent 1000 RPM rear PTO. Dimensions vary slightly between Farmall and International versions, with wheelbases of 105 inches and 92 inches respectively. Weight ranges from 9940 to 11030 pounds. Electrical system includes a 55 amp alternator and two 6-volt batteries. The 1256 is related to models 1456, 856, and 1206.
Power125 hp[P]
Founded1967 - 1969
Model1256

Technical Specifications

Detailed specifications and technical data for International Harvester 1256

Power
PTO (tested)116.12 hp (86.6 kW)
PTO (claimed)113 hp (84.3 kW)
Drawbar (tested)102.03 hp (76.1 kW)
Engine
Typeturbocharged diesel
ModelInternational Harvester DT407
Coolingliquid-cooled
Cylinders6-cylinder
Fuel tank42 gal (159.0 L)
Rated RPM2400
Air cleanerdual dry elements
Bore/Stroke4.321x4.625 inches (110 x 117 mm)
Compression17:1
Displacement406.9 ci (6.7 L)
Oil capacity15 qts (14.2 L)
Starter volts12
Coolant capacity24 qts (22.7 L)
Variants
IH 1256standard
Farmall 1256row-crop
Electrical
Batteries2
Battery AH204
Battery volts6
Charging amps55
Charging systemalternator
Hydraulics
Typeopen center
Valves1
Pump flow8 gpm (30.3 lpm)
Mechanical
DriveTwo- or four-wheel drive
BrakesIndependent hydraulic dry disc brakes
SteeringPower steering
Operator stationOpen operator station. Two-post ROPS optional. Cab optional with heat and air-conditioning.
Production
TypeStandard-tread tractor
Built inRock Island, Illinois, USA
ManufacturerInternational Harvester
Original price$10,700 in 1969
Transmission
Typegear
Gears8 forward and 4 reverse
DescriptionThe 1256's transmission provides four gears (1-4) in high, low, and reverse ranges.
Oil capacity68 qts (64.4 L)
Torque Amplifier
Typepartial power shift
Gears16 forward and 8 reverse
DescriptionFour gears (1-4) in two ranges (low/high) plus reverse range. The Torque Amplifier (TA) allows a clutchless shift from direct drive (DD) to the lower TA speed in all gears and ranges.
Oil capacity68 qts (64.4 L)
Transmission options8-speed gear, 16-speed partial power shift
Tractor hitch
Rear TypeIII/II
Serial Numbers
1967 IH7501
1968 IH7703
1969 IH8444
LocationSerial number place on the left side of the 1256, on the clutch housing.
1967 Farmall7501
1968 Farmall8849
1969 Farmall13140
Dimensions & Tires
Width92 inches (233 cm)
Length164 inches (416 cm)
Weight9940 to 11030 pounds
Rear tire18.4-38 (Farmall), 24.5-32 (International)
Wheelbase105 inches (Farmall) (266 cm), 92 inches (International) (233 cm)
Front tire10.00-16 (Farmall), 11.00-16 (International)
Shipping weight9940 lbs (Farmall) (4508 kg), 11030 lbs (International) (5003 kg)
Ballasted weight13810 lbs (6264 kg)
Operating weight10405 lbs (4719 kg)
Height (steering wheel)86 inches (218 cm)
Power Take-off (PTO)
Rear PTOindependent
Engine RPM1000@2100
Rear PTO Type1000