International Harvester

International Harvester 140

The International 140 began as the industrial version of the Farmall 140. Industrial tractors had heavier front axles and foot-operated throttles, among other options. As the Farmall and International brands were merged the differences simply became options that the buyer could order.

Power28 hp

Founded1958 - 1979

Model140

View Images

Technical Specifications

Detailed specifications and technical data for International Harvester 140

Power

Engine (net)	25 hp (18.6 kW)
Belt (tested)	23.02 hp (17.2 kW)
PTO (claimed)	21 hp (15.7 kW)
Engine (gross)	28 hp (20.9 kW)
Drawbar (tested)	21.25 hp (15.8 kW)

Tires

Ag rear	9.5-24, 11.2-24
Ag front	5.00-15, 6.00-16
Lawn/turf rear	12.4-24

Engine

Type	gasoline
Torque	106 lb-ft (143.7 Nm)
Cooling	liquid-cooled vertical I-head
Cylinders	4-cylinder
Rated RPM	1400
Torque RPM	1400
Air cleaner	oil bath
Bore/Stroke	3.125x4.00 inches (79 x 102 mm)
Power (net)	25 hp (18.6 kW)
Displacement	122.7 ci (2.0 L)
Engine model	International Harvester C-123
Firing order	1-3-4-2
Oil capacity	5 qts (4.7 L)
Power (gross)	28 hp (20.9 kW)
Starter volts	6 (early), 12 (late)
Coolant capacity	15 qts (14.2 L)
Compression ratio	6.94:1

Capacity

Fuel	11 gal (41.6 L)
Hydraulic system	3.38 gal (12.8 L)

Dimensions

Width	56 inches (142 cm)
Length	107 inches (271 cm)
Wheelbase	71 inches (180 cm)
Rear tread	40 to 68 inches (101 to 172 cm)
Front tread	40 to 58 inches (101 to 147 cm)
Shipping weight	2700 lbs (1224 kg)
Ground clearance	22.3 inches (56 cm)
Operating weight	3000 lbs (1360 kg)
Height (steering wheel)	65.5 inches (166 cm)

Electrical

Ground	positive (6V), negative (12V)
Battery volts	6 (early), 12 (late)
Charging system	generator (early), alternator (late)

Hydraulics

Type	IH Touch-Control
Capacity	3.38 gal (12.8 L)
Total flow	4.6 gpm (17.4 lpm)

Mechanical

Drive	Two-wheel drive
Brakes	Differential mechanical contracting band brakes
Steering	manual worm-and-sector
Operator station	Open operator station

Production

Notes	The International 140 began as the industrial version of the Farmall 140. Industrial tractors had heavier front axles and foot-operated throttles, among other options. As the Farmall and International brands were merged the differences simply became options that the buyer could order.
Total built	66,290
Manufacturer	International Harvester
Original price	$8,200 in 1979
Production years	1958 - 1979

Attachments

Loader	1000 Loader
Rollback	15°
Bucket width	36 inches (91 cm), 42 inches (106 cm)
Height at pin	96 inches (243 cm)
Lift capacity	450 lbs lift (full at pin) (204 kg)
Loader weight	701 lbs (317 kg)
Bucket cylinder	1.75 inches (4 cm)
Clearance dumped	90 inches (228 cm)

Transmission

Type	sliding gear
Gears	4 forward and 1 reverse
Clutch	single 9-inch dry disc
Oil capacity	5 qts (4.7 L)

Tractor hitch

Type	IH Fast Hitch (one-point)

Serial Numbers

1958	501
1959	2011
1960	8082
1961	11168
1962	16637
1963	21181
1964	25387
1965	28408
1966	31285
1967	34818
1968	37352
1969	39906
1970	42300
1971	44424
1972	46605
1973	48507
1974	50720
1975	54273
1976	57773
1977	60839
1978	63111
1979	64544
Location	Serial number plate on the left side of the tractor, on the clutch housing.