International Harvester 330
The short-lived International model 330 utility tractor matched the chassis of the 350 with the smaller C-135 engine that would later be used in the model 340. It was built in Rock Island, Illinois, USA from 1957 to 1958 with a total of 4,262 units produced. The 330 featured a 2.2L 4-cylinder gasoline engine, multiple transmission options including a 5-speed sliding gear and a 10-speed two-speed power shift, and an open operator station. It had a drawbar power of about 32 hp and belt power of about 35 hp. The tractor supported various attachments such as front-end loaders and backhoes, and had an IH Fast Hitch for implements.
Power39 hp[B]
Founded1957 - 1958
Model330
Technical Specifications
Detailed specifications and technical data for International Harvester 330
Power
| Belt (tested) | 34.24 hp (25.5 kW) |
|---|---|
| Belt (claimed) | 35.2 hp (26.2 kW) |
| Drawbar (tested) | 31.77 hp (23.7 kW) |
| Drawbar (claimed) | 32.4 hp (24.2 kW) |
Tires
| Ag rear | 11x28, 10x28, 12x28, 14x24 |
|---|---|
| Ag front | 5.50x16, 6.00x16, 7.50x16 |
Engine
| Cooling | liquid-cooled |
|---|---|
| Cylinders | 4-cylinder |
| Fuel type | gasoline |
| Rated RPM | 2000 |
| Air cleaner | oil bath |
| Bore/Stroke | 3.25x4.0625 inches (83 x 103 mm) |
| Displacement | 134.8 ci (2.2 L) |
| Engine model | International Harvester C135 |
| Starter volts | 6 |
| Coolant capacity | 14 qts (13.2 L) |
| Compression ratio | 7.38:1 |
Capacity
| Fuel | 11.25 gal (42.6 L) |
|---|---|
| Hydraulic system | 3.4 gal (12.9 L) |
Dimensions
| Width | 64 inches (162 cm) |
|---|---|
| Length | 117 inches (297 cm) |
| Wheelbase | 73.5 inches (186 cm) |
| Rear tread | 48 to 76 inches (121 to 193 cm) |
| Front tread | 48 to 76 inches (121 to 193 cm) |
| Ballasted weight | 6,115 lbs (2773 kg) |
| Operating weight | 4,100 lbs (1859 kg) |
| Height (steering wheel) | 60 inches (152 cm) |
Hydraulics
| Type | open center (Optional) |
|---|---|
| Valves | 1 to 3 |
| Capacity | 3.4 gal (12.9 L) |
Mechanical
| Drive | Two-wheel drive |
|---|---|
| Brakes | Disc brakes |
| Steering | manual, power (Optional) |
| Operator station | Open operator station |
Production
| Type | Utility tractor |
|---|---|
| Notes | The short-lived International model 330 utility tractor matched the chassis of the 350 with the smaller C-135 that would later be used in the model 340. |
| Built in | Rock Island, Illinois, USA |
| Total built | 4,262 |
| Original price | $2,900 in 1958 |
| Years produced | 1957 - 1958 |
Attachments
| Overview | Front-end loader, Backhoe |
|---|---|
| Wagner 130 Loader | 1000 lbs lift (full at pin) (453 kg), 2000 lbs breakout (907 kg) |
| International 60 Backhoe | Digging depth 120 inches (304 cm), Reach from pivot 150 inches (381 cm), Swing Arc 180° |
| International 90 Backhoe | Digging depth 144 inches (365 cm), Reach from pivot 192 inches (487 cm), Swing Arc 160° |
Transmission
| Options | 5-speed sliding gear, 10-speed two-speed power shift |
|---|---|
| Power shift | Typetwo-speed power shift Gears10 forward and 2 reverse Clutchdry disc TransmissionTorque Amplifier |
| Sliding gear | Typesliding gear Gears5 forward and 1 reverse Clutchdry disc |
Tractor hitch
| Type | IH Fast Hitch |
|---|
Serial Numbers
| 1957 | 501 |
|---|---|
| 1958 | 1488 |
| Final | 4763 |
Power Take-off (PTO)
| Rear PTO | transmission |
|---|---|
| Rear PTO Type | 540 |
| Independent PTO | Optional |
Serial Number Location
| Location | Serial number plate on the right side of the tractor, on the clutch housing. |
|---|
More International Harvester models
View all International Harvester modelsInternational Harvester 10-20 TitanModel10-20
International Harvester 100Model100
International Harvester 1026Model1026
International Harvester 1046Model1046
International Harvester 1055Model1055
International Harvester 1056Model1056
International Harvester 1066Model1066
International Harvester 1086Model1086
International Harvester 1086BModel1086B
International Harvester 1206Model1206
International Harvester 1246Model1246
International Harvester 1255Model1255
