International Harvester 574
The International Harvester 574 is a utility tractor produced from 1970 to 1978. It was manufactured in Doncaster, England and Louisville, Kentucky, USA. The tractor features engine options including a 3.3L 4-cylinder gasoline engine and a 3.9L 4-cylinder diesel engine. It offers multiple transmission types such as an 8-speed partially synchronized, hydrostatic, and a 16-speed two-speed power shift. The tractor has a power output of approximately 67 hp and includes features like two-wheel drive, power steering, hydraulic wet disc brakes, and an open operator station with optional ROPS and cab. Hydraulics are open center type with 2500 psi pressure and 11.9 gpm pump flow. The tractor hitch is category II with position and draft control and a rear lift capacity of 3600 lbs. The PTO is independent with hydraulic wet disc clutch and offers 540 and optional 1000 RPM speeds. Dimensions include a wheelbase of 84.5 inches, length of 134 inches, and weight ranging from 4660 to 5150 pounds depending on configuration. Various front and rear tire sizes are available. Attachments include loaders such as the 1550, 1850, and 2050 models with detailed lift, breakout, and dimension specifications.
Power67 hp
Founded1970 - 1978
Model574
Technical Specifications
Detailed specifications and technical data for International Harvester 574
Power
| Engine | 67 hp (50.0 kW) |
|---|---|
| Engine (net) | 64.7 hp (48.2 kW) |
| PTO (tested) | 52.97 hp (39.5 kW) |
| PTO (claimed) | 52 hp (38.8 kW) |
| Engine (gross) | 68 hp (50.7 kW) |
| Drawbar (tested) | 45.85 hp (34.2 kW) |
| Drawbar (claimed) | 45.1 hp (33.6 kW) |
Engine
| Power | 67 hp (50.0 kW) |
|---|---|
| Torque | 185 lb-ft (250.9 Nm) |
| Options | International Harvester 3.3L 4-cyl gasoline; International Harvester 3.9L 4-cyl diesel |
| Fuel tank | 20.3 gal (76.8 L) |
| Rated RPM | 2200 (gear), 2400 (hydro) |
| Torque RPM | 1600 |
| Air cleaner | two stage dry |
| Bore/Stroke | 3.875 x 5.06 inches (98 x 129 mm) |
| Compression | 12:1 |
| Fuel system | direct injection |
| Power (net) | 64.7 hp (48.2 kW) |
| Displacement | 238.6 ci (3.9 L) |
| Oil capacity | 9 qts (8.5 L) |
| Power (gross) | 68 hp (50.7 kW) |
| Starter volts | 12 |
| Coolant capacity | 14.5 qts (13.7 L) |
| International Harvester C200 | 3.3L 4-cylinder liquid-cooled natural gasoline engine |
| International Harvester D239 | 3.9L 4-cylinder liquid-cooled diesel engine |
General
| Overview | The International 574 is similar to the 2500 backhoe/industrial tractor. |
|---|---|
| Factories | Doncaster, England; Louisville, Kentucky, USA |
| Original price | $10,000 in 1978 |
| Production years | 1970 - 1978 |
Electrical
| Battery volts | 12 |
|---|---|
| Charging amps | 28 |
| Charging system | alternator |
Hydraulics
| Type | open center |
|---|---|
| Pressure | 2500 psi (172.4 bar) |
| Pump flow | 11.9 gpm (45.0 lpm) |
Mechanical
| Drive | Two-wheel drive |
|---|---|
| Brakes | Hydraulic wet disc brakes |
| Steering | Power steering |
| Operator station | Open operator station. Four-post ROPS and cab available. |
Attachments
| Loaders | International Harvester 1550 loader; International Harvester 1850 loader; International 2050 loader |
|---|---|
| 1550 Loader | 2305 lbs lift (full at pin) (1045 kg); 2750 lbs breakout (1247 kg); 45° rollback; 118 inches height (at pin) (299 cm); 90 inches clearance (dumped) (228 cm); boom cyl: 2 inches (5 cm); bucket cyl: 2.5 inches (6 cm); Bucket width: 40 inches (101 cm) |
| 1850 Loader | 2300 lbs lift (full at pin) (1043 kg); 2800 lbs breakout (1270 kg); 14° rollback; 113 inches height (at pin) (287 cm); 92 inches clearance (dumped) (233 cm); weight: 925 lbs (419 kg); Bucket width: 50 inches (127 cm), 60 inches (152 cm) |
| 2050 Loader | 3000 lbs lift (full at pin) (1360 kg); 4100 lbs breakout (1859 kg); 45° dump; 24 inches reach (dumped) (60 cm); 30° rollback (ground line); 125 inches height (at pin) (317 cm); 102 inches clearance (dumped) (259 cm); boom cyl: 2.5 inches (6 cm); boom rod: 1.5 inches (3 cm); bucket cyl: 2.5 inches (6 cm); bucket rod: 1.5 inches (3 cm); weight: 1420 lbs (644 kg); Bucket width: 49 inches (124 cm), 61 inches (154 cm), 70 inches (177 cm), 79 inches (200 cm) |
Transmission
| Types | 8-speed partially synchronized; hydrostatic; 16-speed two-speed power shift |
|---|
Tractor hitch
| Control | position and draft control |
|---|---|
| Rear Type | II |
| Rear lift (at ends) | 3600 lbs (1632 kg) |
Dimensions & Tires
| Width | 64 inches (162 cm) |
|---|---|
| Length | 134 inches (340 cm) |
| Weight | 4660 to 5150 pounds |
| Rear tire | 11-36; 13-30; 14-30; 11-32; 12-38 |
| Wheelbase | 84.5 inches (214 cm) |
| Front tire | 6.00-16; 5.50-16; 7.50-16 |
| Rear tread | 52 to 76 inches (132 to 193 cm) |
| Front tread | 48 to 80 inches (121 to 203 cm) |
| Height (ROPS) | 89 inches (226 cm) |
| Ground clearance | 14.5 inches (36 cm) |
| Gas Shipping Weight | 4660 lbs (2113 kg) |
| Gas Operating Weight | 4835 lbs (2193 kg) |
| Diesel Shipping Weight | 4910 lbs (2227 kg) |
| Diesel Operating Weight | 5150 lbs (2336 kg) |
| Height (steering wheel) | 59.5 inches (151 cm) |
Power Take-off (PTO)
| Clutch | hydraulic wet disc |
|---|---|
| Rear PTO | independent |
| Engine RPM | 540@1935; 1000@2200 |
| Optional PTO | 540/1000 (1.375) |
| Rear PTO Type | 540 (1.375) |
More International Harvester models
View all International Harvester modelsInternational Harvester 10-20 TitanModel10-20
International Harvester 100Model100
International Harvester 1026Model1026
International Harvester 1046Model1046
International Harvester 1055Model1055
International Harvester 1056Model1056
International Harvester 1066Model1066
International Harvester 1086Model1086
International Harvester 1086BModel1086B
International Harvester 1206Model1206
International Harvester 1246Model1246
International Harvester 1255Model1255
