John Deere industrial tractors

John Deere 3010 Wheel

The John Deere 3010 Wheel is an industrial tractor produced from 1961 to 1963 as part of the New Generation Series. Built in Waterloo, Iowa, USA, it features two engine options: a 3.3L 4-cylinder gasoline engine and a 4.2L 4-cylinder diesel engine. The tractor has a partially synchronized 8-speed transmission, two-wheel drive, hydraulic power steering, and differential hydraulic wet disc brakes. It supports various attachments including blades, front-end loaders, and backhoes. The 3010 Wheel is designed for industrial use with a robust hydraulic system and optional independent front and rear PTOs.

Power-

Founded-

Model3010 Wheel

View Images

Technical Specifications

Detailed specifications and technical data for John Deere 3010 Wheel

Power

Plows	4
Engine (net)	69.47 hp (51.8 kW)

Engine

Options	John Deere 3.3L 4-cyl gasoline, John Deere 4.2L 4-cyl diesel
Diesel engine	John Deere 4.2L 4-cyl diesel, liquid-cooled
Diesel torque	179 lb-ft (242.7 Nm)
Gasoline engine	John Deere 3.3L 4-cyl gasoline, liquid-cooled
Gasoline torque	164 lb-ft (222.4 Nm)
Diesel rated RPM	2200
Diesel torque RPM	1500
Diesel air cleaner	oil bath
Diesel bore/stroke	4.125x4.75 inches (105 x 121 mm)
Diesel compression	16.4:1
Diesel power (net)	69.47 hp (51.8 kW)
Diesel pre-heating	ether injection
Gasoline rated RPM	2200
Diesel displacement	254 ci (4.2 L)
Diesel oil capacity	8 qts (7.6 L)
Gasoline torque RPM	900
Diesel starter volts	24
Gasoline air cleaner	oil bath
Gasoline bore/stroke	4.00x4.00 inches (102 x 102 mm)
Gasoline compression	7.5:1
Gasoline power (net)	64.44 hp (48.1 kW)
Gasoline displacement	201 ci (3.3 L)
Gasoline oil capacity	8 qts (7.6 L)
Gasoline starter volts	12
Diesel coolant capacity	19 qts (18.0 L)
Gasoline coolant capacity	19 qts (18.0 L)

Weight

Shipping (gas)	5525 lbs (2506 kg)
Operating (gas)	5790 lbs (2626 kg)
Shipping (diesel)	5747 lbs (2606 kg)
Operating (diesel)	6012 lbs (2727 kg)

Capacity

Fuel	25 gal (94.6 L)
Hydraulic system	9.5 gal (36.0 L)

Variants

3010	ag tractor
3010 Wheel	industrial tractor

Electrical

Ground	postitive (12V), floating (24V)
Battery volts	6
Gas Batteries	2
Diesel Batteries	4

Hydraulics

Type	closed center
Valves	0 to 2
Capacity	9.5 gal (36.0 L)
Pressure	2000 psi (137.9 bar)
Pump flow	18 gpm (68.1 lpm)

Mechanical

Drive	Two-wheel drive
Brakes	Differntial hydraulic wet disc brakes
Steering	hydraulic power
Final drives	planetary
Operator station	Open operator station

Production

Type	Industrial tractor
Series	New Generation Series
Built in	Waterloo, Iowa, USA
Gas built	192 (gas)
Total built	840 (total)
Diesel built	648 (diesel)
Years produced	1961 - 1963

Attachments

Blade	108" Blade, John Deere 82-I, front-mount, 108 inches width (274 cm), 24 inches lift (60 cm), Angling 25°, hydraulic-lift
Backhoe	[object Object],[object Object]
Front-end loader	720 Loader, 3700 lbs lift (full at pin) (1678 kg), 5100 lbs breakout (2313 kg), 50° dump, 34.375 inches reach (dumped) (87 cm), 30° rollback (ground line), 119 inches height (at pin) (302 cm), 95.75 inches clearance (dumped) (243 cm)

Transmission

Type	partially synchronized
Gears	8 forward and 3 reverse
Model	John Deere Syncro-Range
Clutch	304.8mm dry disc
Description	Synchro-Range requires the tractor to be stopped and clutch depressed to select one of four shift stations. Once a station is selected the tractor can be shifted on the move between the two forward gears (and single reverse in stations 1, 2, and 3) by using the clutch.
Oil capacity	38 qts (36.0 L)

Tractor hitch

Rear Type	II

Serial Numbers

1961	1000
1962	19801
1963	32400
Location	Rear of transmission case

Dimensions & Tires

Width	76 inches (min) (193 cm)
Height	81.875 inches (207 cm)
Length	126.25 inches (320 cm)
Rear tire	14.9-28
Wheelbase	82 inches (208 cm)
Front tire	7.50-16
Rear tread	60/80 inches (152/203 cm)
Front tread	56 inches (142 cm)
Height (hood)	59.625 inches (151 cm)
Ground clearance	12.625 inches (32 cm)