Tractorpedia.com

John Deere 302

John Deere 302 tractor
View Images
The John Deere 302 is an industrial tractor produced from 1973 to 1981 by John Deere in Dubuque, Iowa, USA. It features a 2.7L 3-cylinder engine available in diesel or gasoline versions, producing 50 hp net and 52 hp gross. The tractor offers 8-speed gear or hydraulic shuttle transmissions, two-wheel drive, and hydraulic wet disc brakes. It has an open operator station with optional two-post ROPS. The 302 supports various attachments including a front-end loader with a 2500 lbs lift capacity. It has a wheelbase of 74.4 inches, operating weight of 4616 lbs, and uses industrial tires sized 6.50-16 front and 14.9-24 rear. Fuel capacity is 19.5 gallons and hydraulic system capacity is 8.5 gallons with 2300 psi pressure.
John Deere 302industrial tractor52 hp2.7L engine8-speed transmissionhydraulic systemtractor specifications
Power-
Founded-
Model302

Technical Specifications

Detailed specifications and technical data for John Deere 302

Power

Engine:50 hp (37.3 kW)
Engine (net):50 hp (37.3 kW)
Engine (gross):52 hp (38.8 kW)

Tires

Lawn/turf rear:18.4-16A
Industrial rear:14.9-24, 17.5L-24
Lawn/turf front:27-9.50-15
Industrial front:6.50-16, 7.50-16

Engine

Torque:129 lb-ft (174.9 Nm)
Rated RPM:2500
Torque RPM:1300
Bore/Stroke:4.02x4.33 inches (102 x 110 mm)
Compression:16.2:1
Power (net):50 hp (37.3 kW)
Displacement:164 ci (2.7 L)
Oil capacity:6 qts (5.7 L)
Diesel engine:John Deere, diesel, 3-cylinder, liquid-cooled
Power (gross):52 hp (38.8 kW)
Starter volts:12
Engine options:John Deere 2.7L 3-cyl diesel, John Deere 2.7L 3-cyl gasoline
Gasoline Power:50 hp (37.3 kW)
Gasoline engine:John Deere, gasoline, 3-cylinder, liquid-cooled
Coolant capacity:12 qts (11.4 L)
Intake valve clearance:0.014 inches (0.356 mm)
Exhaust valve clearance:0.018 inches (0.457 mm)
Gasoline Intake valve clearance:0.014 inches (0.356 mm)
Gasoline Exhaust valve clearance:0.022 inches (0.559 mm)

Height

Hood:55 inches (139 cm)
ROPS:86 inches (218 cm)
Exhaust:79 inches (200 cm)

Capacity

Fuel:19.5 gal (73.8 L)
Hydraulic system:8.5 gal (32.2 L)

Dimensions

Width:75 inches (190 cm)
Length:121 inches (307 cm)
Wheelbase:74.4 inches (188 cm)
Rear tread:48 to 76 inches (121 to 193 cm)
Front tread:49 to 74 inches (124 to 187 cm)
Ground clearance:11 inches (27 cm)
Operating weight:4616 lbs (2093 kg)

Electrical

Ground:negative
Battery volts:12

Hydraulics

Type:closed center
Capacity:8.5 gal (32.2 L)
Pressure:2300 psi (158.6 bar)
Total flow:13 gpm (49.2 lpm)

Mechanical

Drive:Two-wheel drive
Brakes:Hydraulic wet disc brakes
Final drives:inboard planetary
Power steering:Yes
Operator station:Open operator station. Two-post ROPS optional.

Production

Type:Industrial tractor
Built in:Dubuque, Iowa, USA
Manufacturer:John Deere
Years produced:1973 - 1981

Attachments

Loader:2500 lbs lift (full at pin) (1134 kg), 4000 lbs breakout (1814 kg), 41° dump, 33 inches reach (dumped) (83 cm), 13° rollback (ground line), 121.5 inches height (at pin) (308 cm), 93.6 inches clearance (dumped) (237 cm), raise: 5.1s, dump: 2.9s, lower: 6.1s, rollback: 2.6s, weight: 1534 lbs (695 kg), Bucket width: 73.8 inches (187 cm)

Transmission

Speeds note:Reverse speeds are 15% faster than forward.
Gear transmission:Type: gear, Gears: 8 forward and 4 reverse, Clutch: 279mm dry disc
Transmission options:8-speed gear, 8-speed hydraulic shuttle
Hydraulic shuttle transmission:Type: hydraulic shuttle, Gears: 8 forward and reverse, Clutch: 254mm hydraulic wet disc

Tractor hitch

Rear Type:II/I Optional

Power Take-off (PTO)

Rear PTO:independent (optional)
Rear PTO Type:540 (1.375)

Related Models

John Deere 302A

Model:302A