John Deere 355D
The John Deere 355D is a crawler loader produced from 1986 to 1988. It features a 50 hp (gross) John Deere 3-179D 3-cylinder liquid-cooled diesel engine with a 4-speed shuttle transmission. The tractor has a crawler drive with clutch-brake steering and contracting band brakes. It includes a four-post ROPS canopy with an optional cab. The hydraulic system is open center with a capacity of 16.4 gallons and a pressure of 2250 psi. The 355D has 12-inch wide tracks and weighs 12,400 lbs. It is equipped with a front-end loader capable of 12,100 lbs breakout force and a 66-inch wide bucket. The electrical system uses a 12-volt battery and alternator charging.
Power-
Founded-
Model355D
Technical Specifications
Detailed specifications and technical data for John Deere 355D
Power
| Engine (net) | 48 hp (35.8 kW) |
|---|---|
| Engine (gross) | 50 hp (37.3 kW) |
Engine
| Type | diesel |
|---|---|
| Model | John Deere 3-179D |
| Torque | 126 lb-ft (170.9 Nm) |
| Cooling | liquid-cooled |
| Starter | electric |
| Cylinders | 3-cylinder |
| Rated RPM | 2500 |
| Torque RPM | 1300 |
| Air cleaner | dry |
| Bore/Stroke | 4.19x4.33 inches (106 x 110 mm) |
| Compression | 17.8:1 |
| Power (net) | 48 hp (35.8 kW) |
| Displacement | 179 ci (2.9 L) |
| Oil capacity | 9 qts (8.5 L) |
| Power (gross) | 50 hp (37.3 kW) |
| Starter volts | 12 |
| Coolant capacity | 13 qts (12.3 L) |
Capacity
| Fuel | 22 gal (83.3 L) |
|---|---|
| Hydraulic system | 16.4 gal (62.1 L) *Capacity of the reservoir is 6.4 US gallons and the loader system is 10 gallons. |
Electrical
| Battery volts | 12 |
|---|---|
| Charging system | alternator |
Hydraulics
| Type | open center |
|---|---|
| Capacity | 16.4 gal (62.1 L) *Capacity of the reservoir is 6.4 US gallons and the loader system is 10 gallons. |
| Pressure | 2250 psi (155.1 bar) |
| Pump flow | 23 gpm (87.1 lpm) |
Mechanical
| ROPS | Four-post ROPS canopy. Cab optional. |
|---|---|
| Drive | crawler |
| Brakes | Contracting band brakes |
| Steering | clutch-brake system |
Production
| Type | Crawler Loader |
|---|---|
| Years made | 1986 - 1988 |
Attachments
| Type | front-end loader |
|---|---|
| Dump time | 1.5s |
| Dump angle | 50° |
| Lower time | 4.0s |
| Raise time | 6.5s |
| Bucket width | 66 inches (167 cm) |
| Reach (dumped) | 30 inches (76 cm) |
| Height (at pin) | 119.5 inches (303 cm) |
| Boom rod diameter | 2.0 inches (5 cm) |
| Clearance (dumped) | 98 inches (248 cm) |
| Bucket rod diameter | 1.5 inches (3 cm) |
| Loader breakout force | 12100 lbs (5488 kg) |
| Boom cylinder diameter | 3.75 inches (9 cm) |
| Rollback (ground line) | 40° |
| Bucket cylinder diameter | 2.75 inches (6 cm) |
Transmission
| Type | shuttle |
|---|---|
| Gears | 4 forward and reverse |
| Clutch | wet disc |
Dimensions & Tracks
| Gauge | 48 inches (121 cm) |
|---|---|
| Length | 144.6 inches (367 cm) |
| Weight | 12400 lbs (5624 kg) |
| Track width | 12 inches (30 cm) |
| Height (ROPS) | 91 inches (231 cm) |
| Ground pressure | 7.2 psi (0.5 bar) |
| Ground clearance | 13.25 inches (33 cm) *Ground clearance at rear crossbar. |
| Operating weight | 12400 lbs (5624 kg) |
| Track area on ground | 1662 in² (1.1 m²) |
| Track length on ground | 69.3 inches (176 cm) |
Related Models
More John Deere industrial tractors models
View all John Deere industrial tractors modelsJohn Deere 1010 CrawlerModel1010 Crawler
John Deere 1010 Crawler LoaderModel1010
John Deere 1010 WheelModel1010
John Deere 110TLBModel110TLB
John Deere 2010 WheelModel2010 Wheel
John Deere 210CModel210C
John Deere 210KModel210K
John Deere 210K EPModel210K EP
John Deere 210LModel210L
John Deere 210L EPModel210L EP
John Deere 210LEModel210LE
John Deere 210LJModel210LJ
