John Deere industrial tractors

John Deere 410

The John Deere 410 is a backhoe loader tractor produced from 1971 to 1983. It features a 3.6L 4-cylinder diesel engine producing 66 hp gross and 62 hp net. The tractor has an 8-speed power shuttle transmission and offers two- or four-wheel drive with inboard planetary final drives. It includes hydraulic wet disc brakes, power steering, and a four-post ROPS with an optional cab and heater. The hydraulic system is closed center with a capacity of 20.5 gallons and a pressure of 2350 psi. The loader has a lift capacity of 5000 lbs and breakout force of 7500 lbs, with a 50° dump angle and 33 inches reach. The backhoe has a digging depth of 184 inches and a swing arc of 180°. The tractor was built in Dubuque, Iowa, USA.
Power-
Founded-
Model410

Technical Specifications

Detailed specifications and technical data for John Deere 410

Power
Engine (net)62 hp (46.2 kW)
Engine (gross)66 hp (49.2 kW)
Tires
Industrial rear16.9-24, 18.4-24, 19.5L-24, 21L-24
Industrial front11L-16, 7.50/8.00-16
Engine
Typediesel
ModelJohn Deere 3.6L 4-cyl diesel
Torque160 lb-ft (217.0 Nm)
Coolingliquid-cooled
Cylinders4-cylinder
Rated RPM2500
Torque RPM1300
Air cleanerdry
Bore/Stroke4.02x4.33 inches (102 x 110 mm)
Power (net)62 hp (46.2 kW)
Displacement219 ci (3.6 L)
Oil capacity9 qts (8.5 L)
Power (gross)66 hp (49.2 kW)
Starter volts12
Coolant capacity13 qts (12.3 L)
Intake valve clearance0.014 inches (0.356 mm)
Exhaust valve clearance0.018 inches (0.457 mm)
Loader
Dump time1.3s
Dump angle50°
Lower time2.9s
Raise time4.6s
Bucket width89.4 inches (227 cm)
Breakout force7500 lbs (3402 kg)
Reach (ground)33 inches (83 cm)
Height (at pin)129 inches (327 cm)
Clearance (dumped)102 inches (259 cm)
Rollback (ground line)40°
Lift capacity (full at pin)5000 lbs (2268 kg)
Backhoe
TypeJohn Deere Backhoe
Swing Arc180°
Bucket force9650 lbs (4377 kg)
Digging depth184 inches (467 cm)
Reach from pivot224 inches (568 cm)
Transport height139 inches (353 cm)
Dipperstick force7158 lbs (3246 kg)
2-Foot flat digging depth182 inches (462 cm)
8-Foot flat digging depth170 inches (431 cm)
Capacity
Fuel19.5 gal (73.8 L)
Hydraulic system20.5 gal (77.6 L)
Dimensions
Width84 inches (213 cm)
Height102 inches (259 cm)
Length285.5 inches (725 cm)
Wheelbase82 inches (208 cm)
Rear tread66 inches (167 cm)
Front tread61 inches (154 cm)
Height (backhoe)139 inches (353 cm)
Operating weight14210 lbs (6445 kg)
Electrical
Batteries2
Battery AH340
Battery volts6
Charging systemalternator
Hydraulics
Typeclosed center
Capacity20.5 gal (77.6 L)
Pressure2350 psi (162.0 bar)
Pump flow38 gpm (143.8 lpm)
Mechanical
ROPSFour-post ROPS. Cab optional with available heater.
DriveTwo- or four-wheel drive
BrakesHydraulic wet disc brakes
Final drivesinboard planetary
Power steeringYes
Production
TypeBackhoe loader tractor
Built inDubuque, Iowa, USA
Years produced1971 - 1983
Transmission
Typepower shuttle
Gears8 forward and reverse
Clutch254mm wet disc
Oil capacity40 qts (37.9 L)
Backhoe & Loader
Dig depth184 inches (467 cm)
Dump angle50 inches (127 cm)
Serial Number Location
LocationSerial number plate on the right side of the Deere 410 frame, above the front axle.