Tractorpedia.com
John Deere

John Deere 2210

The John Deere 2210 is a sub-compact utility tractor produced from 2003 to 2006. It features a 23 hp Yanmar 1.0L 3-cylinder diesel engine with hydrostatic transmission offering infinite forward and reverse speeds in two ranges. The tractor is built in Augusta, Georgia, USA, and includes four-wheel drive, mechanical rear differential lock, and power steering. It has a fuel capacity of 5 gallons and a hydraulic system capacity of 3.4 gallons. The 2210 supports various attachments including mid-mount mower decks, snowblower, blade, and front-end loader. Dimensions include a 57 inch wheelbase, 104 inch length, and weighs approximately 1400 lbs. It is equipped with a rear independent PTO and optional mid PTO, both with hydraulic wet disc clutches.
Power23 hp
Founded2003 - 2006
Model2210
John Deere 2210 tractor
View Images

Technical Specifications

Detailed specifications and technical data for John Deere 2210

Power
Engine (net)22.5 hp (16.8 kW)
PTO (claimed)17.7 hp (13.2 kW)
Engine (gross)23 hp (17.2 kW)
Engine
Typediesel
ModelYanmar 3TNE74
Coolingliquid-cooled
Starterelectric
Cylinders3-cylinder
Rated RPM3000
Air cleanerdry
Bore/Stroke2.91x3.07 inches (74 x 78 mm)
Compression23.5:1
Fuel systemindirect injection
Power (net)22.5 hp (16.8 kW)
Pre-heatingcoolant heater (Optional)
Displacement61.4 ci (1.0 L)
Oil capacity2.1 qts (2.0 L)
Power (gross)23 hp (17.2 kW)
Starter power1.5 hp (1.1 kW)
Starter volts12 V
Coolant capacity3.1 qts (2.9 L)
Weight
Weight1400 lbs (635 kg)
Max Drawbar562 lbs (254 kg)
Max rear axle2426 lbs (1100 kg)
Max front axle750 lbs (340 kg)
Capacity
Fuel5 gal (18.9 L)
Hydraulic system3.4 gal (12.9 L)
Electrical
Groundnegative
Battery CCA435
Battery volts12 V
Charging amps20 A
Charging systemalternator
Hydraulics
Typeopen center
Capacity3.4 gal (12.9 L)
Pressure1987 psi (137.0 bar)
Pump flow3 gpm (11.4 lpm)
Mid valves2
Total flow5.5 gpm (20.8 lpm)
Steering flow2.5 gpm (9.5 lpm)
Mechanical
ROPSTwo-post fixed
Final drivesspur gear
Power steeringyes
Four-wheel driveyes
Differential lockmechanical rear
Production
Built inAugusta, Georgia, USA
Years made2003 - 2006
Attachments
54" BladeJohn Deere, front-mount, 54 inches width (137 cm), 11 inches lift (27 cm), 3.5 inches cut (8 cm), 50 lbs (22 kg)
210 Loader622 lbs lift (full at pin) (282 kg), 437 lbs lift (full at 500mm) (198 kg), 721 lbs lift (1.5m at pin) (327 kg), 520 lbs lift (1.5m at 500mm) (235 kg), 1577 lbs breakout (at pin) (715 kg), 1072 lbs breakout (at 500mm) (486 kg), 1650 lbs breakout (bucket) (748 kg), 47.2° dump, 24.2 inches reach (dumped) (61 cm), 50.2 inches reach (ground) (127 cm), 26.5° rollback (ground line), 98.2° rollback (raised), 68.5 inches height (at pin) (173 cm), 50 inches clearance (dumped) (127 cm), 62 inches clearance (level) (157 cm), boom cyl: 1.6 inches (4 cm), boom rod: 1.0 inches (2 cm), bucket cyl: 1.6 inches (4 cm), bucket rod: 1.0 inches (2 cm), Bucket width: 49 inches (124 cm), 53 inches (134 cm), 61 inches (154 cm)
46" Snow blowerJohn Deere 46, 46 inches width (116 cm), single-stage, Total width: 47.5 inches (120 cm), Clear height: 12 inches (30 cm), front-mount, hydraulic-lift, 250 lbs (113 kg)
54" mid-mount mower deckJohn Deere 54C, 54 inches (137 cm), Total width: 64.5 inches (163 cm), 3-blade, hydraulic lift, right-discharge, Cut height: 1 to 5.25 inch (2 to 13 cm), 210 lbs (95 kg)
62" mid-mount mower deckJohn Deere 62C, 62 inches (157 cm), Total width: 72.5 inches (184 cm), 3-blade, hydraulic lift, right-discharge, Cut height: 1 to 5.25 inch (2 to 13 cm), 350 lbs (158 kg)
Transmission
Typehydrostatic
Gearsinfinite forward and reverse (2-range)
Oil capacity13.6 qts (12.9 L)
Tractor hitch
Rear TypeI (Limited)
Rear lift (at 24"/610mm)700 lbs (317 kg)
Serial Numbers
20032100001
20043100001
20054310001
Dimensions & Tires
Width47.9 inches (121 cm)
Length104 inches (264 cm)
Rear tire26x12.00-12
Wheelbase57 inches (144 cm)
Front tire18x8.50-10
Rear tread35.3 inches (89 cm)
Front tread31.1 inches (78 cm)
Height (ROPS)78.6 inches (199 cm)
Height (hood)41.8 inches (106 cm)
Clearance (front axle)7.7 inches (19 cm)
Power Take-off (PTO)
Clutchhydraulic wet disc
Mid PTOindependent
Rear PTOindependent
Rear PTO Type540 (1.375)
Clutch (Mid PTO)hydraulic wet disc (Mid PTO shared clutch with rear PTO.)
Engine RPM (Mid PTO)2100@2600
Engine RPM (Rear PTO)540@2600
Serial Number Location
LocationRight side of main tractor frame, above the front axle.

More John Deere models

View all John Deere models
John Deere 100FModel100F
John Deere 1010Model1010
John Deere 1010CModel1010C
John Deere 1020Model1020
John Deere 1020 VUModel1020 VU
John Deere 1023EModel1023E
John Deere 1025RModel1025R
John Deere 1026RModel1026R
John Deere 1030Model1030
John Deere 1030VUModel1030VU
John Deere 1035Model1035
John Deere 1040Model1040