Tractorpedia.com

John Deere 2450

The John Deere 2450 is a utility tractor produced from 1987 to 1994. It was built in Mannheim, Baden-Württemberg, Germany. It features a 3.9L 4-cylinder diesel engine producing 70 hp (52.2 kW). Transmission options include an 8-speed partially synchronized and a 16-speed two-speed power shift. The tractor offers two- or four-wheel drive with planetary final drives and mechanical rear differential lock. It has power assist steering and hydraulic wet disc brakes. The hydraulic system is closed-center constant pressure with 2756 psi and 11.6 gpm pump flow. The rear hitch is category II with position and draft control and a rear lift capacity of 6768 lbs (3069 kg). The PTO is independent with 540 and 1000 rpm options. Dimensions vary by configuration with wheelbases of about 89-90 inches and weights ranging from 7077 to 8157 lbs depending on options. Electrical system is 12 volts with 55 amp charging and two batteries. Optional cabs include MC1, Sound-Gard, and CC2 (from 1991).
John Deere 2450tractorutility tractor70 hp3.9L dieseltransmissiondimensionshydraulicsPTOfarm tractor
Power70 hp
Founded1987 - 1994
Model2450

Technical Specifications

Detailed specifications and technical data for John Deere 2450

Power

Engine power:70 hp (52.2 kW)

Engine

Type:diesel, 4-cylinder, liquid-cooled
Model:John Deere 3.9L 4-cyl diesel
Power:70 hp (52.2 kW)
Fuel tank:22.2 gal (84.0 L)
Rated RPM:2300
Bore/Stroke:4.19x4.33 inches (106 x 110 mm)
Displacement:239.2 ci (3.9 L)
Starter power:4 hp (3.0 kW)
Starter volts:12
Fuel tank (optional):35.9 gal (135.9 L) With optional 52L tank.

Electrical

Ground:negative
Batteries:2
Battery AH:55
Battery volts:12
Charging amps:55

Hydraulics

Type:closed-center constant pressure
Pressure:2756 psi (190.0 bar)
Pump flow:11.6 gpm (43.9 lpm)

Mechanical

Drive:Two- or four-wheel drive
Brakes:Hydraulic wet disc brakes
Steering:power assist, hydrostatic With four-wheel drive and SG2 cab option.
Final drives:planetary
Differential lock:mechanical rear
ROPS and cab options:ROPS. MC1 or Sound-Gard cab optional. CC2 cab available in 1991.

Production

Type:Utility tractor
Built in:Mannheim, Baden-Württemberg, Germany
Years produced:1987 - 1994

Transmission

Hi-Lo

Type:two-speed power shift
Gears:16 forward and 8 reverse
Clutch:hydraulic
Options:8-speed partially synchronized, 16-speed two-speed power shift

Syncro-Range

Type:partially synchronized
Gears:8 forward and 4 reverse
Clutch:mechanical disc

Tractor hitch

Control:position and draft control
Rear Type:II
Rear lift (at ends):6768 lbs (3069 kg)

Dimensions & Tires

Width:73.3 inches (186 cm)
Length:165.1 inches (419 cm)
Weight:7077 to 8157 pounds
Cab height:96.3 inches (low-profile) (244 cm), 98.2 inches (MC1) (249 cm), 104.8 inches (SG2) (266 cm)
Front tire:7.50-18
Rear tread:59.1 to 78.7 inches (150 to 199 cm)
2WD Rear tire:13.6-38
2WD Wheelbase:89.2 inches (226 cm)
4WD Wheelbase:90 inches (228 cm)
2WD Front tread:53.5 to 79.1 inches (135 to 200 cm)
4WD Front tread:59.1 to 79.1 inches (150 to 200 cm)
2WD MC1 Shipping:7077 lbs (3210 kg)
2WD SG2 Shipping:7485 lbs (3395 kg)
4WD MC1 Shipping:7738 lbs (3509 kg)
4WD SG2 Shipping:8157 lbs (3700 kg)
2WD Standard tires (ag):Front: 7.50-18. Rear: 13.6-38
4WD Standard tires (ag):Front: 11.2-28. Rear: 13.6-38
2WD Clearance (front axle):26.3 inches (66 cm)
4WD Clearance (front axle):19.5 inches (49 cm)

Power Take-off (PTO)

Clutch:hydraulic wet disc
Rear PTO:independent
Engine RPM:540@2075
Rear PTO Type:540, 1000

Related Models

John Deere 2250

Model:2250

John Deere 2650

Model:2650