John Deere

John Deere 4230

The John Deere 4230 was the Generation II replacement for the popular 4020. A row-crop tricycle front-end was an option on the 4230. Along with the smaller 4030, this was the final tractor from the Deere's Waterloo factory to have a tricycle option.
Power111 hp[P]
Founded1973 - 1977
Model4230

Technical Specifications

Detailed specifications and technical data for John Deere 4230

Power
PTO (tested)100.32 hp (74.8 kW)
PTO (claimed)100 hp (74.6 kW)
Drawbar (tested)83.95 hp (62.6 kW)
Engine
Details
Coolingliquid-cooled inline horizontal-shaft
Starterelectric
Idle RPM800-2400
Cylinders6-cylinder
Fuel typediesel
Rated RPM2200
Air cleanerdry with secondary element
Bore/Stroke4.25x4.75 inches (108 x 121 mm)
Pre-heatingether injection, coolant heater Optional
Displacement404 ci (6.6 L)
Firing order1-5-3-6-2-4
ManufacturerJohn Deere
Oil capacity17 qts (16.1 L)
Operating RPM1500-2200
Starter volts12
Compression ratio16.2:1
OptionsJohn Deere 6.6L 6-cyl diesel, John Deere 5.9L 6-cyl gasoline
Capacity
Fuel37 gal (140.0 L)
Hydraulic system16 gal (60.6 L)
Variants
4230row-crop
4230 LPlow-profile
4230 Hi-Crophigh clearance
Electrical
Groundnegative
Batteries2
Battery volts6
Charging systemalternator
Hydraulics
Typeclosed center
Valves1 to 3
Capacity16 gal (60.6 L)
Mechanical
Drive4x2 2WD, 4x4 HFWD 4WD
BrakesDifferential hydraulic wet disc brakes
Final drivesplanetary
Power steeringyes
Operator stationOpen operator station. Four-post Roll-Gard ROPS optional. Sound-Gard cab with air-conditioning optional.
Differential lockhydro-mechanical rear
Production
TypeRow-Crop tractor
SeriesGeneration II Series
Built inWaterloo, Iowa, USA
OverviewThe John Deere 4230 was the Generation II replacement for the popular 4020. A row-crop tricycle front-end was an option on the 4230. Along with the smaller 4030, this was the final tractor from the Deere's Waterloo factory to have a tricycle option.
Years made1973 - 1977
Total built33 (gasoline), 90 (Low-Profile)
Attachments
OverviewJohn Deere 148 loader, John Deere 158 loader
148 Loader
Weight1350 lbs (612 kg)
Dump angle38°
Boom cylinder2.5 inches (6 cm)
Bucket widths60 inches (152 cm), 72 inches (182 cm), 84 inches (213 cm), 96 inches (243 cm)
Lift capacity3100 lbs (1406 kg)
Breakout force4700 lbs (2131 kg)
Reach (dumped)32 inches (81 cm)
Rollback angle11°
Bucket cylinder2.5 inches (6 cm)
Height (at pin)126 inches (320 cm)
Bucket capacities0.5 cu yd (0.4 cu m), 0.6 cu yd (0.5 cu m), 0.8 cu yd (0.6 cu m), 0.9 cu yd (0.7 cu m)
Clearance (level)121 inches (307 cm)
Clearance (dumped)102 inches (259 cm)
158 Loader
Weight1771 lbs (803 kg)
Dump angle37°
Boom cylinder2.75 inches (6 cm)
Bucket widths60 inches (152 cm), 72 inches (182 cm), 84 inches (213 cm), 96 inches (243 cm)
Lift capacity3800 lbs (1723 kg)
Breakout force5000 lbs (2268 kg)
Reach (dumped)32 inches (81 cm)
Rollback angle12°
Bucket cylinder2.5 inches (6 cm)
Height (at pin)156 inches (396 cm)
Bucket capacities0.5 cu yd (0.4 cu m), 0.6 cu yd (0.5 cu m), 0.8 cu yd (0.6 cu m), 0.9 cu yd (0.7 cu m)
Clearance (level)151 inches (383 cm)
Clearance (dumped)132 inches (335 cm)
Transmission
Options8-speed partially synchronized, 16-speed partial power shift, 8-speed full power shift, 13-speed creeper
Quad-Range
Typepartial power shift
Gears16 forward and 6 reverse
Clutchhydraulic wet disc
DescriptionFour gears (1-4) in four ranges (A-D). Power shift between gears 1-2 and 3-4 in each range with a synchronized shift (using clutch) between 2-3. Tractor must be stopped to shift range.
Oil capacity64 qts (60.6 L)
Power Shift
Typefull power shift
Gears8 forward and 4 reverse
Clutchhydraulic wet discs
Oil capacity62 qts (58.7 L)
Syncro-Range
Typepartially synchronized
Gears8 forward and 2 reverse
Clutchhydraulic wet disc
DescriptionFour shift stations with two gears each, plus reverse gear in the first two shift stations. Tractor must be stopped, and clutch used, to shift between stations. Once in a shift station the tractor may be shifted on the move, using the clutch, between the gears in that station.
Oil capacity64 qts (60.6 L)
Syncro-Range Creeper
Typecreeper
Gears13 forward and 4 reverse
DescriptionOptional creeper range adds additional speeds to the first five gears of the Syncro-Range transmission. An interlock prevents shifting into gears 6 through 8 while the creeper is engaged.
Tractor hitch
Rear TypeII
Serial Numbers
19731000
197413000
197522074
197628957
197735588
Final42331
Serial number locationSerial number plate on the rear of the John Deere 4230, above the PTO shaft.
Dimensions & Tires
Weight8100 to 10800 pounds
Rear tire18.4-34
Wheelbase104 inches (264 cm)
Front tire9.5L-15
Power Take-off (PTO)
Rear PTOindependent
Rear PTO Type540/1000 (1.375)