John Deere

John Deere 4555

The John Deere 4555 is a row-crop tractor produced from 1988 to 1992 as part of the 4055 Series. It was built in Waterloo, Iowa, USA. It features a 7.6L 6-cylinder turbocharged diesel engine producing 173 hp (net). The tractor offers two transmission options: a 16-speed partial power shift and a 15-speed full power shift. It has two- or four-wheel drive with inboard planetary final drives and differential hydraulic wet disc brakes. The hydraulic system is closed center with multiple capacity options depending on transmission type. The tractor hitch is category III with rear lift capacities up to 7,057 lbs. The PTO is independent with a hydraulic clutch and a 1000 rpm rear PTO type. Dimensions vary slightly between 2WD and 4WD models, with weights ranging from 15,840 to 17,755 lbs, ballasted up to 21,755 lbs. Electrical system includes a 120 amp alternator and two 12 volt batteries. Attachments include John Deere 280 and 840 loaders with detailed lift and clearance specifications.
Power173 hp
Founded1988 - 1992
Model4555

Technical Specifications

Detailed specifications and technical data for John Deere 4555

Power
Engine (net)173 hp (129.0 kW)
PTO (tested)162.53 hp (121.2 kW)
PTO (claimed)155 hp (115.6 kW)
Drawbar (tested)139.99 hp (104.4 kW)
Engine
Typeturbocharged diesel
Coolingliquid-cooled inline
Cylinders6-cylinder
Rated RPM2200
Air cleanerdry
Bore/Stroke4.5625x4.75 inches (116 x 121 mm)
Power (net)173 hp (129.0 kW)
Displacement466 ci (7.6 L)
Firing order1-5-3-6-2-4
ManufacturerJohn Deere
Oil capacity22 qts (20.8 L)
Starter volts12
Coolant capacity32 qts (30.3 L)
Compression ratio16:1
Intake valve clearance0.015 inches (0.381 mm)
Exhaust valve clearance0.020 inches (0.508 mm)
Weight
Ballasted21,755 lbs (9868 kg)
2WD Quad-Range15,840 lbs (7185 kg)
4WD Powershift17,755 lbs (8053 kg)
Capacity
Fuel102 gal (386.1 L)
Hydraulic system18.5 gal (PowerShift) (70.0 L), 20 gal (PS MFWD) (75.7 L), 26.9 gal (QuadRange) (101.8 L)
Dimensions
Width118 inches (299 cm) *Minimum width with standard axle.
Height (cab)118.8 inches (301 cm)
2WD Wheelbase118.5 inches (300 cm)
4WD Wheelbase117.1 inches (297 cm)
Rack-and-pinion rear axle3.94 by 118 inches (100 by 2997 mm), 3.94 by 108 inches (100 by 2743 mm)
Electrical
Groundnegative
Batteries2
Battery CCA925
Battery volts12
Charging amps120
Charging systemalternator
Hydraulics
Typeclosed center
Valves2 or 3
Capacity18.5 gal (PowerShift) (70.0 L), 20 gal (PS MFWD) (75.7 L), 26.9 gal (QuadRange) (101.8 L)
Pressure2530 psi (174.4 bar)
SCV flow20.6 gpm (78.0 lpm)
Pump flow29.5 gpm (111.7 lpm)
Mechanical
CabSound-Gard cab
DriveTwo- or four-wheel drive
BrakesDifferential hydraulic wet disc brakes
Final drivesinboard planetary
Power steeringYes
Production
TypeRow-Crop tractor
Series4055 Series
Built inWaterloo, Iowa, USA
Years produced1988 - 1992
Attachments
OverviewJohn Deere 280 loader, John Deere 840 loader
280 Loader4580 lbs lift (full at pin) (2077 kg), 6220 lbs breakout (2821 kg), 26 inches reach (dumped) (66 cm), 41° rollback, 178 inches height (at pin) (452 cm), 152 inches clearance (dumped) (386 cm), 173 inches clearance (level) (439 cm), boom cyl: 3.5 inches (8 cm), bucket cyl: 3.125 inches (7 cm), weight: 2795 lbs (1267 kg), Bucket width: 85 inches (215 cm), Bucket width: 97 inches (246 cm)
840 Loader60° dump, 40° rollback, 149 inches clearance (dumped) (378 cm), Bucket width: 96.5 inches (245 cm)
Transmission
Options16-speed partial power shift, 15-speed full power shift
John Deere Quad Rangepartial power shift, 16 forward and 6 reverse gears, Four gears (1-4) in four ranges (A-D) with high-low power shift
John Deere Power Shiftfull power shift, 15 forward and 4 reverse gears
Tractor hitch
Rear TypeIII
Rear lift5,281 lbs (2395 kg), 6,614 lbs (44mm lift cylinder) (3000 kg), 7,057 lbs (55mm lift cylinder) (3201 kg)
Power Take-off (PTO)
Clutchhydraulic
Rear PTOindependent
Rear PTO Type1000 (1.75)