John Deere

John Deere 4600

The John Deere 4600 is a compact utility tractor produced from 1998 to 2001 as part of the 4000 Compact Series. It features a Yanmar 2.0L 4-cylinder diesel engine delivering 41 hp net and 43 hp gross power. The tractor offers multiple transmission options including 9-speed unsynchronized gear, hydrostatic, and partially synchronized power shuttle transmissions with up to 24 speeds. It has two- or four-wheel drive with planetary final drives and mechanical rear differential lock. The hydraulic system is open center with optional valves and a total flow of 14.7 gpm. The tractor includes a rear I-type hitch with position and optional draft control, and a rear PTO with independent operation. It was built in Augusta, Georgia, USA, and originally priced at $25,100 in 2003. Attachments include a 72" mid-mount mower deck, 84" front blade, front-end loader, and backhoe.
Power43 hp
Founded1998 - 2001
Model4600

Technical Specifications

Detailed specifications and technical data for John Deere 4600

Power
Engine (net)41 hp (30.6 kW)
PTO (claimed)36 hp (gear) (26.8 kW), 34.5 hp (hydro) (25.7 kW)
Engine (gross)43 hp (32.1 kW)
Engine
Typediesel
ModelYanmar 4TNE84
Torque98 lb-ft (132.9 Nm)
Coolingliquid-cooled
Cylinders4-cylinder
Rated RPM2600
Torque RPM1700
Air cleanerdry
Bore/Stroke3.31x3.54 inches (84 x 90 mm)
Fuel systemdirect injection
Power (net)41 hp (30.6 kW)
Pre-heatingair heater
Displacement121.7 ci (2.0 L)
Oil capacity5.1 qts (4.8 L)
Power (gross)43 hp (32.1 kW)
Starter power2.7 hp (2.0 kW)
Starter volts12 V
Coolant capacity7.6 qts (7.2 L)
Compression ratio18:1
Capacity
Fuel12.5 gal (47.3 L)
Front axle8.4 qts (7.9 L)
Hydraulic system6.8 gal (gear) (25.7 L), 8.8 gal (hydro) (33.3 L)
Overview
Series4000 Compact Series
CategoryCompact Utility tractor
Original price$25,100 in 2003
Manufactured inAugusta, Georgia, USA
Production years1998 - 2001
Electrical
Groundnegative
Battery CCA650
Battery volts12 V
Charging amps40 A
Charging systemalternator
Hydraulics
Typeopen center
Valves3 (Optional)
Capacity6.8 gal (gear) (25.7 L), 8.8 gal (hydro) (33.3 L)
Pressure2500 psi (172.4 bar)
Pump flow9.9 gpm (37.5 lpm)
Total flow14.7 gpm (55.6 lpm)
Steering flow4.8 gpm (18.2 lpm)
Mechanical
ROPSTwo-post fixed ROPS. Folding ROPS optional.
DriveTwo- or four-wheel drive
BrakesWet disc brakes
Final drivesplanetary
Power steeringYes
Differential lockmechanical rear
Attachments
84" BladeJohn Deere front-mount, 84 inches width (213 cm), Angling 30°, 725 lbs (328 kg), hydraulic-lift, hydraulic-angle
460 Loader2325 lbs lift (full at pin) (1054 kg), 1705 lbs lift (full at 500mm) (773 kg), 2988 lbs lift (1.5m at pin) (1355 kg), 2383 lbs lift (1.5m at 500mm) (1080 kg), 3683 lbs breakout (at pin) (1670 kg), 2929 lbs breakout (at 500mm) (1328 kg), 4370 lbs breakout (bucket) (1982 kg), 45° dump, 27 inches reach (dumped) (68 cm), 62 inches reach (ground) (157 cm), 30° rollback (ground line), 64° rollback (raised), 112 inches height (at pin) (284 cm), 89 inches clearance (dumped) (226 cm), 104 inches clearance (level) (264 cm)
72" mid-mount mower deckmid-mount John Deere, 3-blade with hydraulic lift, Cutting width 72 inches (182 cm), Overall width 85 inches (215 cm)
Transmission
Options9-speed unsynchronized gear, hydrostatic, 12-speed partially synhcronized power shuttle, 24-speed partially synhcronized power shuttle
Hydrostatic
Typehydrostatic
Gearsinfinite forward and reverse (three-range)
NotesHydrostatic transmission operated with two foot pedals. Push-button cruise control on dash. Tractor must be stopped to shift ranges.
Oil capacity35.2 qts (33.3 L)
9-speed gear
Typeunsynchronized gear
Gears9 forward and 3 reverse
NotesThree speeds (1-3), plus reverse, in three ranges (A-C). Tractor must be stopped, and clutch used, to shift speeds or ranges.
Clutchdry disc
Oil capacity27.2 qts (25.7 L)
TransmissionCollar Shift
PowrReverser
Typepartially synhcronized power shuttle
Gears12 forward and reverse
NotesFour speeds (1-4) in three ranges (A-C) with left-hand reverser on dash. Power shuttle allows direction changes without using the clutch. Speeds are synchronized and may be shifting on the move, using the clutch. Tractor must be stopped to shift ranges.
Clutchwet disc, two clutch packs with three 5-inch discs each
Oil capacity27.2 qts (25.7 L)
TransmissionPowrReverser
PowrReverser Creeper
Typepartially synhcronized power shuttle
Gears24 forward and reverse
NotesAdd creeper range to the PowrReverser, engaged by separate lever. Tractor must be stopped, and clutch used, to shift in or out of creeper range.
Clutchwet disc, two clutch packs with three 5-inch discs each
Oil capacity27.2 qts (25.7 L)
TransmissionPowrReverser Creeper
Tractor hitch
Controlposition control, draft control (Optional)
Rear TypeI
Rear lift (at 24"/610mm)2500 lbs (1134 kg)
Serial Numbers
1998160000
1999260001
2000360001
2001460001
Serial number locationSerial number plate on front-right tractor frame, above front wheel.
Dimensions & Tires
Weight3450 lbs (1564 kg)
Rear tire13.6-28
Wheelbase71.5 inches (181 cm)
Front tire8-16
Power Take-off (PTO)
Clutchhydraulic wet disc
Mid PTOindependent
Rear PTOindependent
Mid PTO Type2100
Rear PTO Type540 (1.375)
Mid PTO Engine RPM2100@2600
Rear PTO Engine RPM540@2600