John Deere 5010
The John Deere 5010 is a standard-tread tractor produced from 1963 to 1965 as part of the New Generation Series. It was built in Waterloo, Iowa, USA, with a total of 7,553 units produced. The tractor features a John Deere 8.7L 6-cylinder liquid-cooled diesel engine with 531 ci displacement, rated at 2200 RPM. It has a Syncro-Range 8-speed transmission with 8 forward and 3 reverse gears. The tractor offers 109 hp drawbar power (claimed) and 121 hp PTO power (claimed). It has a wheelbase of 104 inches, length of 172.25 inches, and weighs between 12,270 and 12,925 pounds. The 5010 includes two-wheel drive, power steering, hydraulic wet disc brakes, and an open operator station. It uses a closed center hydraulic system with 17 gallons capacity and 2250 psi pressure. The rear PTO is independent with a 1000 RPM type. Tires vary with front options of 11.00-16 or 7.50-20 and rear options of 24.5-32 or 18.4-34. Electrical system includes a Delco-Remy or Prestolite generator with 4 batteries at 6 volts each. The serial number is located on the rear of the transmission case.
Power134 hp[P]
Founded1963 - 1965
Model5010
Technical Specifications
Detailed specifications and technical data for John Deere 5010
Power
| PTO (tested) | 121.12 hp (90.3 kW) |
|---|---|
| PTO (claimed) | 121 hp (90.2 kW) |
| Drawbar (tested) | 105.92 hp (79.0 kW) |
| Drawbar (claimed) | 109 hp (81.3 kW) |
Tires
| Ag rear | 24.5-32, 18.4-34 |
|---|---|
| Ag front | 11.00-16, 7.50-20 |
Engine
| Type | John Deere 8.7L 6-cyl diesel |
|---|---|
| Rated RPM | 2200 |
| Bore/Stroke | 4.75x5.00 inches (121 x 127 mm) |
| Compression | 16:1 |
| Displacement | 531 ci (8.7 L) |
| Firing order | 1-5-3-6-2-4 |
| Oil capacity | 12 qts (11.4 L) |
| Starter volts | 24 |
| Coolant capacity | 34 qts (32.2 L) |
| Intake valve clearance | 0.015 inches (0.381 mm) |
| Exhaust valve clearance | 0.022 inches (0.559 mm) |
Capacity
| Fuel | 48 gal (181.7 L) |
|---|---|
| Hydraulic system | 17 gal (64.3 L) |
Dimensions
| Width | 95.75 inches (243 cm) |
|---|---|
| Length | 172.25 inches (437 cm) |
| Wheelbase | 104 inches (264 cm) |
| Shipping weight | 12,270 lbs (5565 kg) |
| Ground clearance | 16 inches (40 cm) |
| Height (exhaust) | 96.25 inches (244 cm) |
| Operating weight | 12,925 lbs (5862 kg) |
| Height (steering wheel) | 81.5 inches (207 cm) |
Electrical
| Batteries | 4 |
|---|---|
| Battery AH | 115 |
| Battery volts | 6 |
| Charging system | Delco-Remy or Prestolite generator |
Hydraulics
| Type | closed center |
|---|---|
| Valves | 1 or 2 |
| Capacity | 17 gal (64.3 L) |
| Pressure | 2250 psi (155.1 bar) |
| Pump flow | 20 gpm (75.7 lpm) |
Mechanical
| Drive | Two-wheel drive |
|---|---|
| Brakes | Hydraulic wet disc brakes |
| Power steering | Yes |
| Operator station | Open operator station. |
Production
| Built in | Waterloo, Iowa, USA |
|---|---|
| Total built | 7,553 |
| Manufacturer | John Deere |
| Original price | $11,000 (1965) |
Transmission
| Type | Syncro-Range |
|---|---|
| Gears | 8 forward and 3 reverse |
| Oil type | 303 Special |
| Description | Four shift stations, each with two forward gears and a reverse (except fourth station). Tractor must be stopped and clutch used to select shift station. Tractor can be shifted between gears in the station on the move while using the clutch. |
| Oil capacity | 68 qts (64.4 L) |
Tractor hitch
| Rear Type | 3/2 |
|---|
Serial Numbers
| 1963 | 1000 |
|---|---|
| 1964 | 4501 |
| 1965 | 8000 |
| Final | 10681 |
Power Take-off (PTO)
| Rear PTO | independent |
|---|---|
| Rear PTO Type | 1000 |
Serial Number Location
| Location | Rear of transmission case |
|---|
Related Models
More John Deere models
View all John Deere modelsJohn Deere 100FModel100F
John Deere 1010Model1010
John Deere 1010CModel1010C
John Deere 1020Model1020
John Deere 1020 VUModel1020 VU
John Deere 1023EModel1023E
John Deere 1025RModel1025R
John Deere 1026RModel1026R
John Deere 1030Model1030
John Deere 1030VUModel1030VU
John Deere 1035Model1035
John Deere 1040Model1040
