John Deere
John Deere 5075E
The John Deere 5075E is a utility tractor from the 5E Series produced from 2008 to 2025. It is built in Pune, Maharashtra, India. It features a 2.9L 3-cylinder turbocharged diesel engine delivering 75 hp gross power. The tractor offers a 9-speed partially synchronized SyncReverser transmission with 9 forward and 3 reverse gears. It has two- or four-wheel drive options with planetary final drives and standard rear differential lock. The hydraulic system is open center with capacities varying between 2WD and 4WD models. The tractor includes a folding 2-post ROPS with optional canopies. It supports rear PTO at 540 RPM with mechanical clutch. The 5075E has a wheelbase of 80.7 inches and weighs between 4,634 to 5,475 pounds depending on configuration. It supports front-end loader attachments including the John Deere 512 and 553 loaders with detailed lift and breakout capacities.
Power75 hp
Founded2008 -
Model5075E
Technical Specifications
Detailed specifications and technical data for John Deere 5075E
Power
| PTO (tested) | 64.42 hp (48.0 kW) |
|---|---|
| PTO (claimed) | 61 hp (45.5 kW) |
| Engine (gross) | 75 hp (55.9 kW) |
Engine
| Type | turbocharged diesel |
|---|---|
| Model | John Deere PowerTech 3029H |
| Torque | 195.5 lb-ft (265.1 Nm) |
| Cooling | liquid-cooled |
| Idle RPM | 800-2600 |
| Cylinders | 3-cylinder |
| Rated RPM | 2400 |
| Torque RPM | 1700 |
| Air cleaner | two paper elements |
| Bore/Stroke | 4.19x4.33 inches (106 x 110 mm) |
| Compression | 17.8:1 |
| Pre-heating | coolant heater (optional), heavy-duty air pre-heater (optional) |
| Displacement | 179 ci (2.9 L) |
| Firing order | 1-2-3 |
| Operating RPM | 1800-2400 |
| Starter volts | 12 |
| Coolant capacity | 10 qts (9.5 L) |
| Rated Power (gross) | 75 hp (55.9 kW) |
| Intake valve clearance | 0.014 inches (0.356 mm) |
| Exhaust valve clearance | 0.018 inches (0.457 mm) |
Height
| Hood | 53.8 inches (136 cm) |
|---|---|
| ROPS | 96.8 inches (245 cm), 78.5 inches folded (199 cm) |
Weight
| 2WD Shipping | 4,634 lbs (2101 kg) |
|---|---|
| 4WD Shipping | 5,070 lbs (2299 kg) |
| 4WD Operating | 5,475 lbs (2483 kg) |
Capacity
| Fuel | 18 gal (68.1 L) |
|---|---|
| Front axle | 4.8 qts (4.5 L) |
| Front hubs | 0.85 qts each hub (0.8 L) |
| 2WD Hydraulic system | 10 gal (37.9 L) |
| 4WD Hydraulic system | 10.3 gal (39.0 L) |
Electrical
| Ground | negative |
|---|---|
| Battery CCA | 623 |
| Battery volts | 12 |
| Charging amps | 40 |
| Charging system | alternator |
Engine Oil
| Oil capacity | 9 qts (8.5 L) |
|---|---|
| Oil change interval | 100 h |
Hydraulics
| Type | open center |
|---|---|
| Pressure | 2828 psi (195.0 bar) |
| Pump flow | 11.4 gpm (43.1 lpm) |
| Mid valves | 2 (optional) |
| Total flow | 18.2 gpm (68.9 lpm) |
| Rear valves | 1 or 2 |
| 2WD Capacity | 10 gal (37.9 L) |
| 4WD Capacity | 10.3 gal (39.0 L) |
| Steering flow | 6.8 gpm (25.7 lpm) |
| Steering pressure | 1958 psi (135.0 bar) |
Mechanical
| ROPS | Folding 2-post ROPS. Optional canopy. Optional deluxe canopy with lights and insulation. |
|---|---|
| Drive | Two- or four-wheel drive |
| Brakes | Hydraulic wet disc brakes |
| Steering | hydrostatic power |
| Final drives | planetary |
| Differential lock | rear diff lock standard |
Production
| Series | 5E Series |
|---|---|
| Built in | Pune, Maharashtra, India |
| Category | Utility tractor |
| Years made | 2008 - 2025 |
Attachments
| Overview | front-end loader |
|---|---|
| 512 Loader | Dump angle57° Bucket width73 inches (185 cm) Reach dumped26 inches (66 cm) Reach ground68 inches (172 cm) Height at pin114 inches (289 cm) Breakout at pin4,775 lbs (2165 kg) Clearance dumped85 inches (215 cm) Lift 1.5m at pin3,236 lbs (1467 kg) Lift full at pin2,453 lbs (1112 kg) Breakout at 800mm3,250 lbs (1474 kg) Lift 1.5m at 800mm2,343 lbs (1062 kg) Lift full at 800mm1,580 lbs (716 kg) Rollback ground line23° |
| 553 Loader | Dump angle41° Bucket width72 inches (182 cm) Reach dumped35 inches (88 cm) Reach ground74 inches (187 cm) Height at pin122 inches (309 cm) Breakout at pin5,378 lbs (2439 kg) Clearance dumped94 inches (238 cm) Lift 1.5m at pin4,008 lbs (1818 kg) Lift full at pin3,133 lbs (1421 kg) Breakout at 800mm3,604 lbs (1634 kg) Lift 1.5m at 800mm2,891 lbs (1311 kg) Lift full at 800mm1,956 lbs (887 kg) Rollback ground line33° |
Transmission
| Type | SyncReverser |
|---|---|
| Gears | 9 forward and 3 reverse |
| Clutch | dry disc |
| Options | 9-speed, 9-speed partially synchronized |
| Oil capacity | 40.15 qts (38.0 L) |
Tractor hitch
| Control | position and top-link draft control |
|---|---|
| Drawbar | adjustable drawbar |
| Rear Type | 2 |
| Rear lift (at 24"/610mm) | 3,192 lbs (1447 kg) |
Dimensions & Tires
| Width | 57.3 inches (axle flange) (145 cm) |
|---|---|
| Length | 137.8 inches (350 cm) |
| Wheelbase | 80.7 inches (204 cm) |
| Front axle | Flange axle: 64.6 inch length (1640 mm) |
| Rear tread | 55.8 to 71.7 inches (141 to 182 cm) |
| Front tread | 56 to 80 inches (142 to 203 cm) |
| Lawn/turf rear | 21.5L-16.1 |
| Industrial rear | 16.9-24 |
| Lawn/turf front | 27/12LL-15 (2WD), 9.5-16 (4WD) |
| Industrial front | 11L-15 (2WD), 12.5/80-18 (4WD) |
| Standard tires (ag) | Front: 7.50-16. Rear: 16.9-28 (2WD), Front: 9.5-24. Rear: 16.9-28 (4WD) |
| Flange axle rear axle | 57.5 inch length (1460 mm) |
| 2WD Clearance (front axle) | 18.8 inches (47 cm) |
| 4WD Clearance (front axle) | 13.4 inches (34 cm) |
Power Take-off (PTO)
| Clutch | mechanical |
|---|---|
| Rear PTO | independent |
| Engine RPM | 540@2400 |
| Rear PTO Type | 540 |
More John Deere models
View all John Deere modelsJohn Deere 100FModel100F
John Deere 1010Model1010
John Deere 1010CModel1010C
John Deere 1020Model1020
John Deere 1020 VUModel1020 VU
John Deere 1023EModel1023E
John Deere 1025RModel1025R
John Deere 1026RModel1026R
John Deere 1030Model1030
John Deere 1030VUModel1030VU
John Deere 1035Model1035
John Deere 1040Model1040