John Deere 6120
The John Deere 6120 is a utility tractor produced from 2002 to 2007. It features an 80 hp turbocharged 4-cylinder diesel engine with a 4.5 L displacement. The tractor was built in Mannheim, Germany, and offered various transmission options including fully synchronized, power shuttle, and partial power shift types. It has a 4x2 or optional 4x4 drive, hydrostatic power steering, and hydraulic wet disc brakes. The 6120 has a wheelbase of 94.5 inches and weighs approximately 9,350 lbs. It includes a rear PTO with independent operation and optional front PTO. The tractor is equipped with a pressure flow compensated hydraulic system with 4 valves and a 25 gpm pump flow. It was available in utility and low-profile chassis variants.
Power80 hp
Founded2002 - 2007
Model6120
Technical Specifications
Detailed specifications and technical data for John Deere 6120
Power
| Engine power | 80 hp (59.7 kW) |
|---|---|
| PTO (tested) | 72.3 hp (53.9 kW) |
| PTO (claimed) | 65 hp (48.5 kW) |
| Drawbar (tested) | 53.5 hp (39.9 kW) |
Engine
| Type | turbocharged diesel, 4-cylinder, liquid-cooled |
|---|---|
| Model | John Deere PowerTech 4045TL070 / 4045TL271 |
| Power | 80 hp (59.7 kW) |
| Torque | 195 lb-ft (264.4 Nm) / 256 lb-ft (347.1 Nm) |
| Idle RPM | 875-2510 (4045TL070) / 845-2465 (4045TL271) |
| Emissions | Tier I / Tier II |
| Fuel tank | 30.1 gal (113.9 L) |
| Rated RPM | 2300 |
| Torque RPM | 1500 |
| Air cleaner | dry |
| Bore/Stroke | 4.19x5.00 inches (106 x 127 mm) |
| Displacement | 276 ci (4.5 L) |
| Firing order | 1-3-4-2 |
| Operating RPM | 1000-2300 |
| Starter power | 4 hp (3.0 kW) |
| Starter volts | 12 |
| Coolant capacity | 14.4 qts (13.6 L) |
| Engine oil capacity | 16.8 qts (15.9 L) |
| Oil change interval | 500 h |
| Intake valve clearance | 0.014 inches (0.356 mm) |
| Exhaust valve clearance | 0.018 inches (0.457 mm) |
Variants
| 6120 | utility chassis |
|---|---|
| 6120L | low-profile chassis |
Electrical
| Ground | negative |
|---|---|
| Battery volts | 12 |
| Charging volts | 14 |
| Charging system | alternator |
Hydraulics
| Type | pressue flow compensated |
|---|---|
| Valves | 4 |
| Pump flow | 25 gpm (94.6 lpm) |
Mechanical
| ROPS | Two-post ROPS. ConfortGard Cab optional. |
|---|---|
| Drive | 4x2 2WD, 4x4 MFWD 4WD (optional) |
| Brakes | Hydraulic wet disc brakes |
| Steering | hydrostatic power |
Production
| Type | Utility tractor |
|---|---|
| Built in | Mannheim, Baden-Württemberg, Germany |
| Original price | $36,000 (2007) |
| Years produced | 2002 - 2007 |
Transmission
| Options | 12-speed fully synchronized, 16-speed power shuttle, 16-speed partial power shift, 24-speed partial power shift |
|---|---|
| John Deere PowrQuad | Typepartial power shift Gears16 forward and reverse Clutchwet disc Oil typeJD HyGard DescriptionFour gears (1-4) in four ranges (A-D) with reverser lever. Clutchless power shift between gears (1-4) and direction changes (power shuttle). Range shifts (A-D) are synchronized, and may be shifted while the tractor is moving by using the clutch. Optional creeper adds an additional twelve speeds for 28 forward and reverse. The PowrQuad uses a gear-shift lever while the PowrQuad Plus (cab tractors only) offers push-button gear shifting. Oil capacity51.8 qts (49.0 L) |
| John Deere SyncroPlus | Typefully synchronized Gears12 forward and 4 reverse Clutchwet disc Oil typeJD HyGard DescriptionThree gears (1-3) plus reverse (R) in four ranges (A-D). Directional, gear, and range changes are synchronized and may be shifting while moving by using the clutch. Optional creeper adds an additional nine forward and three reverse speeds for a total of 21-forward and 7-reverse. Oil capacity55 qts (52.1 L) |
| John Deere PowrQuad Plus | Typepartial power shift Gears24 forward and reverse Clutchwet disc Oil typeJD HyGard DescriptionFour gears (1-4) in six ranges (A-F) with reverser lever. Push-button power shifting between gears (1-4) and power shuttle directional shifting using the reverser lever. Ranges (A-F) may be shifted on the move by using the clutch. Oil capacity52.8 qts (50.0 L) |
| John Deere SyncroPlus Power Reverser | Typepower shuttle Gears16 forward and reverse Clutchwet disc Oil typeJD HyGard DescriptionFour gears (1-4) in four ranges (A-D) with left-hand reverser. Gear and range shifts are synchronized. Power shuttle shifting between forward and reverse. Only available on open-station (ROPS) equipped tractors. Oil capacity55 qts (52.1 L) |
Tractor hitch
| Rear Type | II |
|---|---|
| Rear lift capacity | 4745 lbs (2152 kg) |
Serial Numbers
| Location | Serial number plate on the right side of the tractor's main frame. |
|---|
Dimensions & Tires
| Height | 98.3 inches (249 cm) |
|---|---|
| Length | 162.7 inches (413 cm) |
| Min Width | 61.8 inches (156 cm) |
| Wheelbase | 94.5 inches (240 cm) |
| Rear tread | 63.1 to 95.1 inches (160 to 241 cm) |
| Front tread | 58.7 to 101.7 inches (149 to 258 cm) (2WD), 59.7 to 79.4 inches (151 to 201 cm) (4WD) |
| Operating weight | 9,350 lbs (4WD cab) (4241 kg) |
| Standard tires (ag) | Front: 10.00-16. Rear: 16.9-30 (2WD), Front: 12.4-24. Rear: 16.9-30 (4WD) |
| Clearance (front axle) | 23.1 inches (2WD) (58 cm), 19.3 inches (4WD) (49 cm) |
Power Take-off (PTO)
| Rear PTO | independent |
|---|---|
| Front PTO | optional |
| Engine RPM | 540@2124, 540@2143 (reversible), 1000@2208 |
| Rear PTO Type | 540, 540/1000 |
| Front PTO Type | 1000 |
| Front PTO Engine RPM | 1000@2185 |
Related Models
More John Deere models
View all John Deere modelsJohn Deere 100FModel100F
John Deere 1010Model1010
John Deere 1010CModel1010C
John Deere 1020Model1020
John Deere 1020 VUModel1020 VU
John Deere 1023EModel1023E
John Deere 1025RModel1025R
John Deere 1026RModel1026R
John Deere 1030Model1030
John Deere 1030VUModel1030VU
John Deere 1035Model1035
John Deere 1040Model1040
