John Deere 7230
The John Deere 7230 is a row-crop tractor produced from 2007 to 2011 as part of the 7030 Small-Frame Series. Manufactured in Mannheim, Germany, it was available with ROPS or a basic cab, with upgraded hydraulics and hitch optional on ROPS and premium systems only available on the 7230 Premium model. It features a 6.8L 6-cylinder turbocharged diesel engine producing 135 hp, multiple transmission options including full synchro and partial power shift types, and a variety of hydraulic and PTO capabilities. The tractor supports two- or four-wheel drive configurations and offers a range of tire and dimension options suitable for agricultural use.
Power135 hp
Founded2007 - 2011
Model7230
Technical Specifications
Detailed specifications and technical data for John Deere 7230
Power
| Engine | 135 hp (100.7 kW) |
|---|---|
| PTO (claimed) | 110 hp (82.0 kW) |
| Engine (gross) | 135 hp (100.7 kW) |
Engine
| Type | turbocharged diesel |
|---|---|
| Model | John Deere 6068HL280 / 6068HL282 |
| Power | 135 hp (100.7 kW) |
| Torque | 389-399 lb-ft (527.5-541.0 Nm) |
| Cooling | liquid-cooled |
| Idle RPM | 850-2460 |
| Cylinders | 6-cylinder 12-valve |
| Rated RPM | 2300 |
| Torque RPM | 1500 |
| Air cleaner | dual paper elements |
| Bore/Stroke | 4.19x5.00 inches (106 x 127 mm) |
| Displacement | 414.4 ci (6.8 L) |
| Firing order | 1-5-3-6-2-4 |
| Oil capacity | 20.8 qts (19.7 L) |
| Operating RPM | 1500-2300 |
| Starter power | 4 hp (3.0 kW) |
| Starter volts | 12 |
| Coolant capacity (cab) | 35.6 qts (33.7 L) |
| Intake valve clearance | 0.014 inches (0.356 mm) |
| Coolant capacity (ROPS) | 32.8 qts (31.0 L) |
| Exhaust valve clearance | 0.018 inches (0.457 mm) |
Capacity
| Fuel | 54.7 gal (207.0 L), 66 gal (249.8 L) Optional |
|---|---|
| Front axle | 8.8 qts (8.3 L) |
| Front hubs | 1.6 qts (1.5 L) |
| Hydraulic system | 13.7 gal (51.9 L) |
Variants
| 7230 | base tractor |
|---|---|
| 7230 Premium | deluxe tractor |
Electrical
| Ground | negative |
|---|---|
| Battery volts | 12 |
| Charging amps | 90 |
| Charging system | alternator |
Hydraulics
| Type | constant flow load sensing, closed-center load sensing (optional ROPS) |
|---|---|
| Valves | 2 to 4 |
| Capacity | 13.7 gal (51.9 L) |
| Pressure | 2900 psi (200.0 bar) |
| Pump flow | 21.1 gpm (79.9 lpm), 29 gpm (109.8 lpm) Optional |
Mechanical
| ROPS | Two-post Roll-Gard ROPS. Cab optional. |
|---|---|
| Drive | Two- or four-wheel drive |
| Brakes | Differential hydraulic wet disc brakes |
| Steering | Power steering |
Production
| Type | Row-Crop tractor |
|---|---|
| Notes | The basic 7230 was available with ROPS or a basic cab. Upgraded hydraulics and hitch were optional with ROPS. Upgraded systems with a cab were only available on the 7230 Premium model. |
| Series | 7030 Small-Frame Series |
| Original price | $69,616 in 2011 |
| Years produced | 2007 - 2011 |
| Manufactured in | Mannheim, Baden-Württemberg, Germany |
Transmission
| Options | 12-speed full synchro shift,16-speed full synchro shift,16-speed partial power shift,24-speed partial power shift |
|---|---|
| John Deere SyncroPlus | Typefull synchro shift Gears12 forward and 4 reverse NotesFour ranges, each with four forward gears and reverse operated via a range shift lever and gear shift lever. Clutch must be used to change range or gear. Only available with ROPS. Oil capacity54.8 qts (51.9 L) |
| John Deere PowrQuad (16-speed) | Typepartial power shift Gears16 forward and reverse NotesFour ranges, each with four gears. Operated via range shift lever and gear shift lever plus reverser lever. Clutch must be used to change range, clutchless power shift between gears and for direction change. Oil capacity54.8 qts (51.9 L) |
| John Deere PowrQuad (24-speed) | Typepartial power shift Gears24 forward and reverse NotesSix ranges, each with four gears. Operated via range shift lever and gear shift lever plus reverser lever. Clutch must be used to change range, clutchless power shift between gears and for direction change. Oil capacity54.8 qts (51.9 L) |
| John Deere SyncroPlus PowrReverser | Typefull synchro shift Gears16 forward and reverse NotesFour ranges, each with four gears. Operated via range shift lever and gear shift lever plus reverser lever. Clutch must be used to change range or gear. Oil capacity54.8 qts (51.9 L) |
Tractor hitch
| Control | position control, electronic lower-link (optional ROPS) |
|---|---|
| Rear Type | II |
| Rear lift (at 24"/610mm) | 5,915 lbs (2683 kg) |
Dimensions & Tires
| Width | 65.5 inches (166 cm) Length at the flange axle ends. |
|---|---|
| Length | 187.3 inches (475 cm) |
| Weight | 9657 to 12755 pounds |
| Front tire | 10.00-16 |
| Rear tread | 63.5 to 72.5 inches (161 to 184 cm) |
| Height (cab) | 114.4 inches (290 cm) |
| 2WD Rear tire | 18.4R38 |
| 2WD Wheelbase | 106.3 inches (270 cm) |
| 4WD Wheelbase | 104.3 inches (264 cm) |
| Bar rear axle | 3.1 by 100.6 inches (78 by 2555 mm) |
| Height (ROPS) | 115.2 inches (292 cm) |
| 2WD Front tread | 59.5 to 85.5 inches (151 to 217 cm) |
| 4WD Front tread | 59.4 to 88 inches (150 to 223 cm) |
| Flange rear axle | 65.5 inch length (1663 mm) |
| Clearance (drawbar) | 19 inches (48 cm) |
| Height (Folded ROPS) | 90.8 inches (230 cm) |
| Clearance (rear axle) | 28.2 inches (71 cm) |
| 4WD Standard tires (ag) | Front: 14.9R24. Rear: 18.4R38 |
| 2WD Clearance (front axle) | 21.6 inches (54 cm) |
| 4WD Clearance (front axle) | 23 inches (58 cm) |
Power Take-off (PTO)
| Rear PTO | independent |
|---|---|
| Engine RPM | 540@2124, 540@2143 (reversible), 1000@2208 |
| Rear PTO Type | 540/1000, 540/540E/1000 Optional |
Serial Number Location
| Location | Right side of main frame above front axle |
|---|
More John Deere models
View all John Deere modelsJohn Deere 100FModel100F
John Deere 1010Model1010
John Deere 1010CModel1010C
John Deere 1020Model1020
John Deere 1020 VUModel1020 VU
John Deere 1023EModel1023E
John Deere 1025RModel1025R
John Deere 1026RModel1026R
John Deere 1030Model1030
John Deere 1030VUModel1030VU
John Deere 1035Model1035
John Deere 1040Model1040
