John Deere 7810
The John Deere 7810 is a row-crop tractor produced from 1997 to 2003 as part of the 7010 Series. It features a powerful 8.1L 6-cylinder turbocharged aftercooled diesel engine delivering 175 hp, with multiple transmission options including partial and full power shifts and an Infinitely Variable Transmission (IVT). Built in Waterloo, Iowa, USA, it offers two- or four-wheel drive configurations, advanced hydraulics, and a variety of hitch and PTO options. The tractor is known for its robust mechanical features, comfortable cab, and versatile tire and axle configurations, making it suitable for a wide range of agricultural tasks.
Power175 hp
Founded1997 - 2003
Model7810
Technical Specifications
Detailed specifications and technical data for John Deere 7810
Power
| Engine power | 175 hp (130.5 kW) |
|---|---|
| PTO (tested) | 167.58 hp (125.0 kW) |
| PTO (claimed) | 150 hp (111.9 kW) |
| Drawbar (tested) | 139.47 hp (104.0 kW) |
Engine
| Type | turbocharged aftercooled diesel |
|---|---|
| Model | John Deere PowerTech |
| Power | 175 hp (130.5 kW) |
| Torque | 579 lb-ft (785.1 Nm) |
| Cooling | liquid-cooled |
| Cylinders | 6-cylinder |
| Rated RPM | 2100 |
| Torque RPM | 1400 |
| Air cleaner | dual dry element |
| Bore/Stroke | 4.56x5.06 inches (116 x 129 mm) |
| Fuel system | direct injection |
| Displacement | 496 ci (8.1 L) |
| Oil capacity | 25 qts (23.7 L) |
| Starter volts | 12 V |
| Coolant capacity | 27.5 qts (26.0 L) |
| Compression ratio | 16.5:1 |
Weight
| Ballasted | 19770 lbs (8967 kg) Weight with 18.4R42 rear duals with fluid and front and rear cast iron |
|---|---|
| Operating | 16365 lbs (7423 kg) Weight with 18.4R42 rear singles, four-wheel drive, and IVT transmission |
| Max Drawbar | 3,150 lbs (extended) (1428 kg), 6,280 lbs (short) (2848 kg) |
| 2WD Shipping | 12352 lbs (5602 kg) |
| 4WD Shipping | 14142 lbs (6414 kg) |
Capacity
| Cab Fuel | 91 gal (344.4 L) |
|---|---|
| ROPS Fuel | 71.5 gal (270.6 L) |
| Front axle | 15.2 qts (14.4 L) |
| Front hubs | 2 qts (1.9 L) |
Overview
| Series | 7010 Series |
|---|---|
| Built in | Waterloo, Iowa, USA |
| Category | Row-Crop tractor |
| Original price | $80,000 in 1999 |
| Production years | 1997 - 2003 |
Electrical
| Ground | negative |
|---|---|
| Batteries | 2 |
| Battery CCA | 925 |
| Battery volts | 12 V |
| Charging amps | 140 A |
| Charging system | alternator |
Hydraulics
| Type | closed center pressure flow compensated (PFC) |
|---|---|
| Valves | 2 to 5 |
| Pressure | 2900 psi (200.0 bar) |
| SCV flow | 26 gpm (98.4 lpm) |
Mechanical
| Cab | standard |
|---|---|
| Drive | Two- or four-wheel drive |
| Brakes | Hydraulic wet disc brakes |
| Final drives | inboard planetary |
| Power steering | yes |
| Differential lock | electro-hydraulic |
Transmission
| Options | 16-speed partial power shift, 19-speed full power shift, Infinitely Variable Transmission (IVT), 20-speed partial power shift |
|---|---|
| AutoPowr | NoteThe AutoPowr IVT became available in 2002. TypeInfinitely Variable Transmission (IVT) Gearsinfinite forward and reverse |
| John Deere AutoQuad | Typepartial power shift Gears20 forward and reverse DescriptionFour speeds (1-4) in five ranges (A-E) with reverser lever. Speeds (1-4) and forward-reverse shuttle are power shifts. Ranges are synchronized, and may be shifting on the move by using the clutch. AutoQuad uses push-button gear shifting on the range shift lever. Auto mode allows for automatic gear shifting to match load. 2WD Oil capacity91.6 qts (86.7 L) 4WD Oil capacity103.6 qts (98.0 L) |
| John Deere PowrQuad | Typepartial power shift Gears16 forward and reverse DescriptionFour speeds (1-4) in four ranges (A-D) with reverser lever. Speeds (1-4) and forward-reverse shuttle are power shifts. Ranges are synchronized, and may be shifting on the move by using the clutch. Also available as 20-speed with five ranges. 2WD Oil capacity91.6 qts (86.7 L) 4WD Oil capacity103.6 qts (98.0 L) |
| John Deere PowerShift | Typefull power shift Gears19 forward and 7 reverse DescriptionThe power shift transmission is operated with a single right-hand shift lever. Transmission can be directly shifted up to gear 11 forward and 7 reverse. 2WD Oil capacity96 qts (90.9 L) 4WD Oil capacity108 qts (102.2 L) |
Tractor hitch
| Rear Type | IIIN/II |
|---|---|
| Rear lift | 8925 lbs (4048 kg) |
| Front lift | 7700 lbs (3492 kg) |
| Front Hitch | IIIN/II Optional |
| Rear lift optional | 10050 lbs (4558 kg) |
Serial Numbers
| 1997 | 1001 |
|---|---|
| 1998 | 10001 |
| 1999 | 20001 |
| 2000 | 30001 |
| 2001 | 50001 |
| 2002 | 70001 |
| 2003 | 80001 |
Dimensions & Tires
| Height | 118.5 inches (300 cm) |
|---|---|
| Length | 187 inches (474 cm) |
| 2WD Wheelbase | 114.4 inches (290 cm) |
| 4WD Wheelbase | 110.2 inches (279 cm) |
| Rear axle options | 3.62 by 96 inches (91 by 2438 mm), 3.62 by 110.5 inches (91 by 2806 mm), 3.62 by 118.6 inches (91 by 3012 mm) |
| 2WD Standard tires | Front: 11.00-16, Rear: 18.4R38 |
| 4WD Standard tires | Front: 14.9R28, Rear: 18.4R38 |
| Rear tread options | 60 to 85.7 inches (152 to 217 cm) (2.5m axle), 60 to 100.3 inches (152 to 254 cm) (2.8m axle), 60 to 108.3 inches (152 to 275 cm) (3.0m axle) |
Power Take-off (PTO)
| Clutch | hydraulic wet discs |
|---|---|
| Rear PTO | independent |
| Engine RPM | 540@2100, 1000@2100 |
| Rear PTO Type | 540/1000 (1.375) |
Serial Number Location
| Location | Serial number plate on the right side of the tractor frame, above the front axle. |
|---|
More John Deere models
View all John Deere modelsJohn Deere 100FModel100F
John Deere 1010Model1010
John Deere 1010CModel1010C
John Deere 1020Model1020
John Deere 1020 VUModel1020 VU
John Deere 1023EModel1023E
John Deere 1025RModel1025R
John Deere 1026RModel1026R
John Deere 1030Model1030
John Deere 1030VUModel1030VU
John Deere 1035Model1035
John Deere 1040Model1040
